Local Guide · Hurricane shutters and impact windows
Do Colonial and Bahama Shutters Protect Against Hurricanes? Style, Protection and Code Compliance
Colonial and Bahama shutters can be real hurricane protection or pure decoration, and from the street they look the same. Here is how they work, how to tell rated from decorative, and what Florida and Texas require.
Colonial shutters are louvered panels hinged at each side of a window that close together and lock with a storm bar. Bahama (Bermuda) shutters are one louvered panel hinged at the top, propped open for shade and lowered and secured for a storm. Both can be approved hurricane protection, but many are decorative and protect nothing. Only a product with a Florida approval or Miami-Dade NOA (or a TDI evaluation in Texas), installed per that approval, counts for code or insurance.
Key facts
- Florida requires the approval label on Bahama awning and colonial hinged shutters to be placed on the bottom, on the back of the shutter (FBC 1709.9.3).
- The label must show the approval holder, the methods of approval (such as Miami-Dade NOA, Florida approval, TDI Product Evaluation or ICC-ES), the test standards and the FL# or NOA number (FBC 1709.9.2).
- Florida law bars marketing a product as hurricane or windborne-debris protection unless it is approved under s. 553.842 or s. 553.8425.
- In Texas, TDI lists repair or replacement of decorative shutters among projects that do not require a windstorm inspection.
- The HVHZ deflection table sets an L/30 limit for 'storm shutters and fold-down awnings' with at least 1 inch of clear separation from the glass at maximum permissible deflection (FBC Table 1616.3).
- Miami-Dade issues permanent shutter permits under category 29 and requires HOA approval for permanent storm shutters before the permit is issued.
- Florida's residential code lets shutters cover bedroom escape openings only during the threat of a storm, with a first-floor means of escape kept available (FBC R310.4).
- On Florida's 2026 wind mitigation form, undocumented shutters that appear rated are scored Level N ('Ordinary'), and decorative coverings earn no credit.
What are colonial hurricane shutters?
Colonial shutters are the classic pair of louvered panels mounted on hinges at the left and right sides of a window. Day to day they stay open against the wall, framing the window like traditional shutters. For a storm, you swing both panels closed so they meet in the middle, latch them, and secure them, usually with a horizontal storm bar (or bars) across the front that locks into brackets, plus bolts or pins at the top and bottom. Rated colonial shutters are generally made of aluminum, built far heavier than decorative vinyl or wood versions.
How they work in a storm
- Hinges: carry the panel weight and part of the wind load; they must be anchored to the approval's specifications.
- Center latch: joins the two panels.
- Storm bar(s): span the closed panels and transfer load to the wall at each side.
- Top and bottom locks: keep the panels from flexing or lifting at the ends.
When closed, colonial shutters cover the whole window and block most light, so the room goes dark.
What are Bahama (Bermuda) shutters?
Bahama shutters, also called Bermuda shutters, are a single louvered panel hinged across the top of the window. Day to day, adjustable prop arms hold the bottom out from the wall at an angle, so the shutter works like an awning: it shades the glass while letting air and some view through the louvers. For a storm, you remove or release the arms, lower the shutter flat over the window, and secure the bottom with pins, bolts or locking arms as the approval shows.
Because the louvers angle downward, a closed Bahama shutter still lets some light in around the edges and through the slats while blocking debris. They are common on coastal and Caribbean-style homes in Florida and on Texas coastal cottages.
Colonial vs. Bahama: side-by-side
| Factor | Colonial | Bahama |
|---|---|---|
| Hinge | Sides (pair of panels) | Top (single panel) |
| Everyday position | Open flat against wall | Propped out as an awning |
| Everyday benefit | Traditional look | Shade, privacy, airflow |
| Closing for a storm | Swing closed, latch, install storm bar | Release arms, lower, secure bottom |
| Light when closed | Dark | Some light through louvers |
| Wall space needed | Both sides of window, each about half the window width | Above the window only |
| Fits best | Traditional, colonial-revival, some Mediterranean homes | Key West, coastal cottage, Caribbean styles |
| Escape concern | Covers window when closed | Can block a bedroom window even when propped, depending on angle |
| Florida label location | Bottom, back of shutter | Bottom, back of shutter |
Functional vs. decorative: the most important distinction
Many shutters sold for homes are decorative: vinyl, composite or light wood panels screwed to the wall beside the window that never close, or that close but are not built or tested for storms. They look nearly identical to rated colonials and Bahamas from the street. Decorative shutters provide no hurricane protection and earn no insurance credit.
The law treats them differently, too:
- Florida: it is a deceptive practice to market a product as hurricane, windstorm or windborne-debris protection unless it is approved under s. 553.842 or s. 553.8425. If a seller calls a shutter 'hurricane' without an approval, that is a red flag.
- Texas: TDI lists repair or replacement of decorative shutters among projects that do not need a windstorm inspection. Working opening protection installed for TWIA eligibility is different and goes through the certification path.
How to tell if yours are rated
- Look for the label. Florida requires a permanent label on the bottom, on the back of Bahama and colonial shutters (FBC 1709.9.3). Lift a Bahama shutter or open a colonial and look at the lower back edge.
- Read it. It should name the approval holder and show the approval methods, test standards and the FL# or NOA number (FBC 1709.9.2).
- Look up the number in the Florida product approval system or Miami-Dade Product Control search, and check that the approval is current and covers your window size. See NOA lookup and Florida product approval lookup.
- Check the hardware: do they close fully, and is there a storm bar or locking hardware? Shutters with no way to lock closed are almost certainly decorative.
- Check permit records at your building department.
If you find no label and no records, assume they are decorative, or at best Level N on the Florida wind mitigation form.
Can colonial shutters be closed quickly before a storm?
Usually faster than panels, slower than roll-downs. Each window means swinging two panels, latching, and fitting and locking the storm bar and end bolts. Ground-floor windows are easy; second-floor colonials may need to be closed from inside through an open window (if the design allows) or from a ladder. Before buying, ask how each panel is closed on upper floors and practice once before the season. TDI's advice for removable systems applies here too: practice on one or two openings to learn the time it takes.
Store storm bars with their windows, labeled, if they are removable. A missing storm bar can leave a colonial shutter unable to meet its rating.
Wind load on open Bahama shutters
A propped Bahama shutter is an awning: wind can get under it and lift it, which loads the top hinge and the prop arms. Approved products are designed for storm use in the closed position. Do not leave Bahama shutters propped open in a storm, even a tropical storm; lower and secure them when a hurricane watch is issued. The HVHZ deflection table in Florida's code groups 'storm shutters and fold-down awnings' together under the same L/30 limit and 1-inch minimum clear separation from the glass at maximum permissible deflection (FBC Table 1616.3), which tells you the code expects them closed and tight over the glass in a storm.
Everyday, check prop arms for corrosion and loose pins, and make sure the top anchors are tight. A shutter that drops unexpectedly can injure someone below.
Do Bahama shutters provide shade and lower AC costs?
Bahama shutters shade the glass while letting air move, which is a large part of their appeal in hot climates. Shading a window from direct sun reduces the heat that comes through the glass, so many owners find rooms feel cooler. We did not find a neutral, dated study measuring Bahama shutter energy savings in Florida or Texas, so we will not quote a percentage. The effect depends on window orientation (west and south windows gain the most), louver angle, and the glass itself. For more on glass and energy, see energy efficiency and noise.
Do Bahama and colonial shutters block egress windows?
They can. Every bedroom needs an emergency escape opening that works from inside without keys, tools or special knowledge, with a net clear opening of at least 5.7 square feet (5 square feet at grade floor), at least 24 inches high and 20 inches wide (FBC Residential R310.1.1, R310.2). Code allows storm shutters to cover these openings only temporarily, during the threat of a storm, and while they do, at least one means of escape must remain on the first floor (R310.4).
- Closed colonials over a bedroom window block escape unless the design lets you open them from inside. Open them after the storm.
- Propped Bahamas leave a gap under the shutter, but depending on the prop angle the gap may be too small to climb through. Ask for a prop angle or arm that leaves a usable escape path, or consider a different product for bedroom windows.
See rules on leaving shutters closed.
Are colonial and Bahama shutters approved for the HVHZ?
Some products are. Approval is per product: Miami-Dade's Product Control database separates HVHZ and non-HVHZ approvals, so look for an NOA valid for HVHZ use if you are in Miami-Dade or Broward. In the HVHZ, shutters must pass the large missile test (a 9-lb 2x4 at 50 feet per second, three specimens, two impacts each) without deforming into contact with the glass, then pass cyclic pressure loading (FBC 1626). The approval also limits window size and specifies anchors for your wall type.
Miami-Dade's permit checklist for permanent shutters (category 29) requires the current NOA for each shutter, a drawing of openings with the mean roof height, and HOA approval before the permit is issued. Zoning review applies on commercial buildings, condominiums and apartment buildings. See HVHZ requirements.
Are Bahama shutters good in Key West and the Keys?
They are a traditional look in the Keys and fit many island homes, and they give daily shade. In the Keys, wind exposure is severe: NOAA's NCEI reports that Hurricane Irma (2017), which made landfall at Cudjoe Key as a Category 4, destroyed 25% of buildings in the Keys and significantly damaged 65%. So use only products approved for your design pressure and install exactly per the approval.
Historic districts: in Key West, exterior changes in historic districts may need review by the City of Key West's Historic Architectural Review Commission (HARC), which can regulate the look of shutters. We could not confirm HARC's current shutter rules for this guide, so contact the city's planning department before ordering. Other Florida and Texas cities with designated historic districts may have their own design review, so check locally before you buy. See historic homes and hurricane protection.
How much do Bahama and colonial shutters cost?
We could not verify a named, dated cost source for these shutters in Florida or Texas, so we do not list prices. They are usually priced per window rather than per square foot, and cost depends on size, louver style, color, design pressure and story height. Rated aluminum versions cost far more than decorative vinyl ones, which is one reason decorative products get sold as 'hurricane style.' Compare quotes on the same windows and require the FL# or NOA on each line. See hurricane shutter cost.
Do they count for insurance discounts?
Rated and documented ones can. On Florida's wind mitigation form (OIR-B1-1802, Rev. 04/26), opening protection verified to the large-missile standards (9-lb missile for windows and doors) can be rated Level A, and protection tested with a 4 to 8 lb missile is Level B. Coverings that appear to be A or B but lack documentation are Level N, and decorative shutters do not count. The form rates the weakest opening, so every window, door, skylight and garage door must be protected for the credit. Citizens advises giving the inspector NOA letters for features that are not clearly marked. See wind mitigation form guide.
Texas: coastal cottages and WPI-8
Bahama and colonial shutters suit many Texas coastal cottages and raised beach houses from Galveston to Port Aransas. If you want them counted as opening protection for a TWIA-eligible home, choose a product with a TDI-accepted evaluation (on TDI's Windstorm System), file Form WPI-1 before work, and have the installation inspected to earn a WPI-8. TDI tells owners to use only products tested to ASTM E1886 and E1996 with a recognized product approval, and warns that 'Force 12' ratings meet only the minimum of a Category 1 hurricane. Decorative shutters on the same house need no windstorm inspection, and they do not protect the window either. See TWIA windstorm certification.
Questions to ask before you buy
- What is the FL# or Miami-Dade NOA for this exact model, and is it current?
- Does the approval cover each of my window sizes at my required design pressure?
- Is it rated for the large missile, since my windows are within 30 feet of the ground (FBC 1609.1.2)?
- In Miami-Dade or Broward, is the approval valid for the HVHZ?
- What anchors will you use for my wall (block, concrete or wood frame), and will you patch the stucco?
- How do I close the second-floor shutters, from inside or from a ladder?
- For Bahamas, what prop angle leaves room to escape from a bedroom window?
- Where do storm bars, pins and tools get stored?
- What colors are offered, and do they meet my HOA, condo or historic district rules?
- Who pulls the permit, and is the final inspection included?
- What does the written warranty cover for finish, hinges and hardware near salt water?
Then compare quotes with our contractor and quote checklist.
Maintenance
- Before each season, close every shutter fully and lock it; make sure storm bars and pins are present.
- Check hinges and prop arms for corrosion, cracked welds and loose fasteners.
- Rinse with fresh water near salt air, especially on the Gulf and in the Keys.
- Clean louvers of wasp nests and debris, which are common in Bahama shutters.
- Touch up finish per the maker's instructions; do not add holes or attachments that the approval does not show.
- Keep the label readable and keep the approval and permit with your house records.
More in hurricane shutter maintenance.
How to choose a provider
- Decide whether you want daily shade (Bahama) or a traditional look (colonial).
- Ask for the FL#, NOA or TDI evaluation, not just the words 'hurricane rated'.
- Check the approval covers your window sizes and design pressure.
- In Miami-Dade or Broward, confirm the approval is valid for the HVHZ.
- Get HOA or historic-district approval before ordering.
- Plan bedroom escape for each shuttered bedroom window.
- Confirm the label on the bottom back of each shutter after install.
- Lower Bahamas and close colonials when a watch is issued.
- Keep storm bars, pins and paperwork together.
- Rinse and inspect hinges and props every season.
Related hurricane shutters and impact windows guides
- What Are the Types of Hurricane Shutters? Accordion, Roll-Down, Panels, Fabric, Colonial and Bahama Compared
- Can You Put Impact Windows or Hurricane Shutters on a Historic Home?
- How Do You Look Up a Miami-Dade NOA (Notice of Acceptance) and Read It?
- Florida Product Approval (FL Number): How Do You Search floridabuilding.org and Verify Windows, Doors and Shutters?
- How Much Do Hurricane Shutters Cost? Prices by Type for Panels, Accordion, Roll-Down, Fabric and Bahama
- Wind Mitigation Form OIR-B1-1802: How Is Opening Protection Graded (Classes A, B, C, N, X)?
- Can a Florida HOA Deny Hurricane Shutters or Impact Windows? What s. 720.3035(6) Requires
- Do You Need a Texas Windstorm Certificate (WPI-8) for New Windows, Doors or Shutters?
Hurricane shutters and impact windows by state and city
Questions people ask
Do decorative shutters count as hurricane protection?
No. Decorative shutters are not tested or approved for wind-borne debris and earn no insurance credit. In Florida, products cannot be marketed as hurricane protection without approval. In Texas, TDI does not even require a windstorm inspection to repair or replace decorative shutters, because they are not opening protection.
Do Bahama shutters protect against hurricanes?
Approved ones do, when lowered and secured as the approval shows. Many Bahama shutters on homes are decorative or made for shade only. Check for the Florida label on the bottom back of the shutter and look up its FL# or NOA before counting on it.
Can Bahama shutters stay propped open during a storm?
No. Propped open, a Bahama shutter acts like an awning and wind can lift it, stressing the hinges and arms. Approved products protect the window in the closed, secured position. Lower and lock them when a hurricane watch is issued for your area, and raise them again only after the wind has fully passed.
Are wood colonial shutters hurricane rated?
Most wood shutters on homes are decorative. Rated colonial shutters are typically aluminum and carry a product approval. A wood product could only count if it has an approval covering your window and is installed per it. Look for the label and the approval number.
Can I convert decorative shutters into hurricane shutters?
Not by adding hardware yourself. Protection comes from the whole tested system: panels, hinges, storm bars and anchors. To get protection, replace decorative shutters with an approved product, or use another approved option such as panels or impact windows. Keep the decorative shutters for looks if you like them, but do not count them as protection.
Do I need a permit for Bahama shutters?
In Florida, permanent shutters generally need a building permit. Miami-Dade uses category 29 with the NOA, a drawing and HOA approval. Other cities have similar shutter permits. Decorative shutters may be treated differently; ask your building department. On the Texas coast, rated shutters for TWIA need a WPI-1 and inspection.
Will my HOA allow colonial or Bahama shutters?
Florida HOAs must adopt hurricane protection specifications and may not deny an application that conforms to them, though they may require a unified look (s. 720.3035(6)). Ask for the written specs, which may limit color and style, and submit your application with the product approval.
Are colonial shutters a good choice for a two-story house?
They can be, if the upper shutters can be closed and locked safely. Some designs let you close them from inside through an open window; others need a ladder. Ask how each upper window is closed before buying, and consider roll-downs or impact windows for upper openings you cannot reach safely.
Do Bahama shutters reduce glare and heat?
They shade the glass while letting air through, which reduces direct sun on windows and is why they are popular in hot climates. The benefit depends on which way the window faces and the louver angle. We found no neutral study to give a percentage for energy savings.
Sources
- Florida Building Code, Building 8th Ed. (2023), Chapter 17 Special Inspections and Tests (UpCodes)
- Florida Building Code, Building 8th Ed. (2023), Chapter 16 Structural Design (UpCodes)
- Florida Building Code, Residential 8th Ed. (2023), Chapter 3 Building Planning (UpCodes)
- Florida Statutes s. 553.842, Product evaluation and approval
- Miami-Dade County, Windows, Shutters and Doors permits
- Miami-Dade County, Product Control Search
- Miami-Dade County, Product Control Section (product approval)
- Florida Statutes s. 720.3035, HOA architectural control; hurricane protection
- Florida OIR Form OIR-B1-1802, Uniform Mitigation Verification Inspection Form (Rev. 04/26)
- Citizens Property Insurance, Your Wind Inspection
- Texas Department of Insurance, Do you need a windstorm inspection?
- Texas Department of Insurance, Questions to Ask Your Contractor Before Installing Opening Protection
- Texas Department of Insurance, Windstorm Product Evaluations
- NOAA NCEI, Billion-Dollar Disasters: Florida summary
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


