New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Thu, Nov 19, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · Hurricane shutters and impact windows

What Are the Types of Hurricane Shutters? Accordion, Roll-Down, Panels, Fabric, Colonial and Bahama Compared

Six main shutter families protect Florida and Texas homes. Here is how each works, how long it takes to close, where it fits, and what the building code and your insurer need to see.

The main types of hurricane shutters are removable storm panels (steel, aluminum or clear polycarbonate), accordion shutters, roll-down shutters (manual or motorized), fabric screens, colonial shutters and Bahama shutters. Panels cost least but take the most work. Accordions and roll-downs stay on the house and close fast. No type is automatically strongest: strength depends on each product's tested approval, design pressure and missile rating, so check the FL# or Miami-Dade NOA for every product.

Key facts

  • Florida's code calls hurricane shutters 'impact-resistant coverings' and requires them to be tested at 1.5 times the design pressure (FBC 1609.1.2.4.1).
  • Every impact-resistant covering sold for Florida use must carry a permanent label from the approval holder showing approval methods, test standards and the FL# or NOA number (FBC 1709.9).
  • The label goes on the bottom of the locking bar or center mate for accordions, the bottom of the hood or bottom slat for roll-ups, the bottom back for Bahama and colonial shutters, and is embossed or printed at least every 3 lineal feet on metal and plastic panels (FBC 1709.9.3).
  • In Miami-Dade and Broward (HVHZ), shutters must stop the large missile without deforming into contact with the glass they protect (FBC 1626.2.6.1).
  • The HVHZ deflection table limits storm shutters to L/30 and requires at least 1 inch of clear separation from the glass at maximum permissible deflection (FBC Table 1616.3).
  • Florida's residential code lets shutters cover bedroom escape windows only temporarily, during the threat of a storm, with at least one first-floor means of escape kept open (FBC R310.4).
  • Florida HOA law lists permanent fixed storm shutters, roll-down track shutters and polycarbonate panels as hurricane protection an HOA must allow if they meet its specs (s. 720.3035(6)).
  • TDI says galvanized and aluminum shutters tested to the same standard should perform the same, and warns that 'Force 12' ratings only meet the minimum of a Category 1 hurricane.

The six main types at a glance

Every shutter does one job: it takes the hit from flying debris so the glass behind it stays whole and the house stays sealed. They differ in how they are stored, how fast they close and how they look. This table is a starting point. Costs are relative because prices change by county, size and product; see hurricane shutter cost for priced detail.

TypePermanent or removableRelative costTime to closeStorageLight when closedTypical use
Steel or aluminum panelsRemovable (tracks or studs stay)LowestSlowest; hours for a whole houseNeeds garage or shed spaceDarkBudget protection, new-construction minimum
Clear polycarbonate panelsRemovableLow to moderateSlow, but lighter to liftNeeds space; avoid scratchingLets light inOpenings where you want daylight
Fabric screensRemovable or roll-upModerateFast; light to carryRolls or folds smallSome lightWide openings, lanais, large glass
AccordionPermanentModerateFast; slide and lockStacks beside the openingDarkSliders, balconies, condos
Roll-down (manual or motorized)PermanentHighestFastest; crank or buttonRolls into a box above the openingDarkSecond floors, storefronts, absentee owners
ColonialPermanent, hinged on sidesModerate to highModerate; swing and secureOpen beside the windowDarkTraditional-style homes
BahamaPermanent, hinged at topModerate to highModerate; lower and securePropped open above windowSome light around edgesCoastal and Key West style homes, shade

Key point: a colonial or Bahama shutter can be purely decorative. Only a product with a hurricane approval counts. See colonial and Bahama shutters.

Storm panels: steel, aluminum and polycarbonate

Panels are corrugated sheets that slide into a track (header) above the opening and a track or threaded studs below, held with wing nuts or bolts. Many Florida builders install anchors and panels as a low-cost way to meet the code on new homes. When a storm threatens, the owner carries each panel to its opening and bolts it on.

  • Steel (galvanized): heavier to lift, generally the lowest material cost.
  • Aluminum: lighter and common in Florida.
  • Clear polycarbonate: lets light in, so the house is not a cave and you can see out. It also makes it easier to see a way out in an emergency, though the panel still blocks the opening.

TDI's advice for panels: have the installer pre-mark each panel and leave a layout plan and instructions, and practice putting up one or two openings ahead of time to see how long it takes. Full guide: storm panels: steel vs. aluminum vs. polycarbonate.

Accordion shutters

Accordion shutters are interlocking blades that fold like an accordion and stack at one or both sides of the opening. To close, you slide them along top and bottom tracks and lock them at the center or side. They are popular on sliding glass doors, balconies and condo buildings, where boards often specify a uniform style and color. Because they stay on the house, there is nothing to store. The drawbacks: the stacked shutter is visible beside the window year-round, tracks collect sand and need care, and a closed accordion over a bedroom window blocks escape unless it can be opened from inside. Full guide: accordion hurricane shutters.

Roll-down shutters

Roll-down (rolling) shutters are horizontal slats that roll up into a box, called a hood, mounted above the opening. They lower along side tracks by hand crank, strap or motor. They are the fastest to deploy and the easiest for one person, especially on a second floor, and many owners use them for security and shade too. They cost the most, the hood changes the look of the house, and motorized units need a plan for power outages. In Tampa, electric shutters need a building permit with product approval review plus electrical and building final inspections. Full guide: roll-down hurricane shutters.

Fabric hurricane screens

Fabric screens are panels of tough woven fabric, often coated, that attach with grommets, straps or tracks, or roll down from a housing. They are light, store small and can span openings too wide for panels, such as lanais and large window walls. The catch is that fabric flexes when hit. It must be mounted far enough from the glass that it does not touch the glass when it stretches. Each approval spells out that distance and the maximum size. Full guide: fabric hurricane screens.

Colonial and Bahama shutters

Colonial shutters are pairs of louvered panels hinged at the sides of the window. Close them, latch them together, and secure them with a storm bar. Bahama (Bermuda) shutters are a single louvered panel hinged at the top, propped open as an awning for shade and lowered and locked for a storm. Both look like traditional shutters and stay on the house. Many decorative versions exist that give no protection at all. In Texas, TDI lists repair or replacement of decorative shutters among projects that do not need a windstorm inspection, which is a reminder that decorative shutters are not treated as protection. Full guide: colonial and Bahama shutters.

Which type is strongest?

No shutter type is strongest by definition. Strength is a property of the specific product, shown in its approval. Look at three numbers:

  1. Design pressure (psf): the positive and negative wind pressure the product resists. Your opening's required pressure depends on wind speed, exposure, height and location on the wall. See design pressure ratings explained.
  2. Missile level: large missile (a 9-lb 2x4 in Florida's HVHZ test) or small missile. Openings within 30 feet of grade need large-missile protection (FBC 1609.1.2).
  3. Maximum size and mounting: the approval limits span and lists the anchors, spacing and substrate (block, wood frame, concrete). A strong shutter mounted with the wrong anchors is weak.

TDI makes the same point: galvanized and aluminum shutters tested to the same impact and wind pressure standard should perform the same. And it warns that a 'Force 12' product only meets the very minimum of a Category 1 hurricane, 74 mph. Ask for the standard (ASTM E1886/E1996, TAS 201/202/203), not a marketing name. More: missile impact testing standards.

Do all shutter types have Miami-Dade NOAs?

Approvals exist per product, not per type. Many accordion, roll-down, panel, fabric, colonial and Bahama products hold Miami-Dade NOAs or Florida approvals, and many do not. Florida's product approval system lists 'Shutters' and 'Impact Protective Systems' as categories, and Miami-Dade's Product Control search lets you filter HVHZ and non-HVHZ approvals by number. Florida law bars selling or marketing a product as hurricane or windborne-debris protection unless it is approved under s. 553.842 or s. 553.8425.

What to do: ask for the NOA or FL# in writing before you sign, look it up yourself, and confirm that the approval covers your opening size, wall type and design pressure. In the HVHZ, confirm the approval is valid for HVHZ use. See how to look up a Miami-Dade NOA and Florida product approval lookup.

Texas: TDI publishes product evaluations on its Windstorm System and links third-party evaluation reports. TDI says it does not approve or endorse any product by linking a report, and that a link alone does not prove an improvement complies. Your inspector or engineer checks the product and installation for the WPI-8.

Egress: do not trap yourself

Every sleeping room needs an emergency escape opening that opens from inside without keys, tools or special knowledge (FBC Residential R310.1.1). Under R310.4, the code lets you close storm shutters and panels over these openings only temporarily, during the threat of a storm. While they are closed, at least one means of escape must remain on the first floor, not inside a garage without a side door to the outside, and people must be able to reach it without passing through a lockable door they do not control.

What this means by type:

  • Panels: remove them after the storm. Do not leave them up all season on bedroom windows.
  • Accordions: some models open from inside with a key or thumb-turn lock; ask about this for bedrooms.
  • Roll-downs: make sure the manual override is reachable from inside.
  • Clear panels: let you see out, but you still cannot climb out through them.

Miami-Dade applies a similar idea to security bars: emergency escape openings with bars must keep a net clear opening of at least 5.7 square feet (5 square feet at grade floor), at least 24 inches high and 20 inches wide. For local rules on how long shutters can stay closed, see shutters left up rules.

Which shutters work best for common situations?

SituationTypes to considerWhy
Two-story houseRoll-down, accordion, colonial or Bahama on upper floor; panels belowAvoid carrying panels up ladders in wind.
Large sliding glass doorsAccordion, roll-down, fabric; or impact slidersPanels for wide doors are many and heavy.
One person deploying aloneRoll-down (motorized is easiest), accordion, fabric, clear panelsLess lifting.
Pool cage or lanaiAccordion or roll-down on the house wall; fabric across the screen opening if the approval allowsFlorida's code does not require protecting openings in a porch under an existing roof if the wall into the house is protected (FBC R301.2.1.2).
Mediterranean or Key West styleBahama, colonial, or hidden roll-down boxesKeep the look; check historic district rules.
Business storefrontRoll-downFast deployment and after-hours security. See commercial protection.
Rental or vacation homeRoll-down, accordionStay on the house; easier for a manager. See rental property guide.
Condo balconyWhatever the board specifiesFlorida boards must adopt specs (s. 718.113(5)). See condo rules.

Permanent vs. removable shutters

Permanent shutters (accordion, roll-down, colonial, Bahama) stay mounted. They cost more but close faster and need no storage. In Miami-Dade, permanent shutters are a separate permit category (29) from removable panels (101), and permanent storm shutters require written HOA approval before the permit is issued. Zoning review is required for permanent shutters on commercial buildings, including condominiums and apartment buildings.

Removable shutters (panels, most fabric) cost less but need storage space, labeling and a deployment plan. Only the permanent anchors or tracks stay on the wall. Lost wing nuts and unmarked panels are the most common reasons a removable system fails in practice. Keep a bin with hardware, a drill bit or wrench, gloves and the layout plan with the panels.

Storage needs for removable systems

  • Measure the stack: a full set of panels for a house can fill a large section of garage wall. Ask the installer how many panels you will have.
  • Store flat or upright in a rack, out of standing water, so panels do not bend.
  • Number each panel and mark the matching opening with paint pen or a tag, as TDI suggests.
  • Keep polycarbonate away from abrasives and harsh solvents, which can scratch or cloud it; follow the maker's care sheet.
  • Fabric rolls small but should be kept dry and out of sunlight.
  • Make the stored shutters easy to show. Citizens asks policyholders to make stored panels available to the wind mitigation inspector.

How long does each type last?

We could not find a neutral, dated study of shutter lifespans, so treat any 'lasts 30 years' claim as marketing. Life depends on salt exposure, sun, maintenance and how often you use them. What you can verify: the written warranty (and what it excludes, such as salt-air corrosion), whether replacement parts are available, and the approval's expiration date. Miami-Dade first-time product approvals are valid for five years and must be renewed; an expired approval does not mean your installed shutter failed, but a new install should use a current approval.

Gulf coast note: in Galveston, Corpus Christi, Port Aransas and South Padre, salt spray attacks fasteners, tracks and motors. Rinse shutters with fresh water after storms and periodically, check anchors for rust, and ask for stainless or coated hardware that the approval allows. More in hurricane shutter maintenance.

What about plywood, window film and tape?

Plywood is not a shutter product, but Florida's residential code allows 7/16-inch wood structural panels as opening protection on homes with a mean roof height of 33 feet or less where the design wind speed is 180 mph or less. The panels must be precut, predrilled, overlap the wall at least 2 inches beyond the fastener lines, and attach to permanently installed corrosion-resistant anchors (FBC R301.2.1.2). On Florida's wind mitigation form, plywood earns Level C, below rated shutters. TDI calls properly installed plywood an emergency measure. See DIY plywood protection.

Window film is not listed as opening protection in the code sections above, and film products cannot be sold as hurricane protection in Florida unless they are approved under s. 553.842. Tape does nothing; FLASH tells homeowners not to tape windows. See window film and other myths.

What is common in Florida vs. Texas?

Florida: aluminum panels with permanent anchors are a common builder choice on new homes because they meet the code at low cost. Accordions are common on condo balconies and sliders, where boards set a uniform color and style under s. 718.113(5). Roll-downs are common on storefronts and on homes owned by part-year residents. In Miami-Dade and Broward, every product must carry an approval valid for the HVHZ.

Texas: on the Gulf coast, panels and roll-downs are common on beach houses that sit empty part of the year, and owners must match the product to a TDI-accepted evaluation for the WPI-8. Salt-air corrosion is the main maintenance issue from Galveston to South Padre. Inland, in Houston, Dallas, San Antonio and Austin, shutters are a choice rather than a TDI requirement, and local building departments set the rules.

Insurance and inspections

On Florida's wind mitigation form (OIR-B1-1802, Rev. 04/26), any shutter type can earn Level A if it is verified to the large-missile standards and documented, and Level B for a smaller 4 to 8 lb missile. Shutters that appear rated but have no paperwork are scored Level N. The form rates the weakest opening, so one unprotected window lowers the whole house. Keep the approval documents and labels. See wind mitigation form guide.

In coastal Texas, shutters installed for TWIA eligibility must follow a TDI-accepted evaluation and be inspected during installation to earn a WPI-8. See TWIA windstorm certification.

How to choose a provider

  • List each opening and its height above ground.
  • Mark bedroom escape windows and plan a first-floor exit.
  • Decide which openings need permanent shutters and which can use panels.
  • Get the FL#, NOA or TDI evaluation for every product quoted.
  • Check that the approval covers your opening size, wall type and design pressure.
  • Ask condo or HOA for written hurricane protection specs.
  • Confirm a permit is included (Florida) or a WPI-1 notice and inspections (Texas coast).
  • Number panels, mark openings and store hardware with the panels.
  • Practice closing one or two openings before June 1.

Related hurricane shutters and impact windows guides

Hurricane shutters and impact windows by state and city

Questions people ask

What hurricane shutters can one person deploy alone?

Motorized roll-down shutters are the easiest, followed by manual roll-downs, accordions and fabric screens. Clear polycarbonate panels are lighter than steel. Large metal panels on high windows are hard for one person and risky on a ladder in wind. Practice before the season to see what you can handle.

Which shutters block light during a storm?

Metal panels, accordions, roll-downs and closed colonial shutters make rooms dark. Clear polycarbonate panels let daylight in and let you see outside. Some fabric screens let in filtered light. Bahama shutters let a little light in around the edges when closed.

What is the lifespan of each shutter type?

There is no neutral study we can cite. Life depends on salt exposure, sun, maintenance and use. Compare written warranties, including corrosion exclusions, and ask whether parts will be available. Motors on roll-downs and fabric exposed to sun usually need attention sooner than heavy metal parts.

Are clear polycarbonate panels as strong as steel or aluminum?

They can be, if they carry an approval for your opening's design pressure and missile level. Strength comes from the tested product, not the material name. Check the NOA or FL# and the maximum span. Follow the approval drawings for the required clearance between the panel and the glass, because any panel that flexes into the glass can break it.

Do shutters need a permit in Florida?

Generally yes. Miami-Dade requires a permit with the NOA for each shutter, a drawing of the openings and mean roof height, and HOA approval for permanent shutters. Tampa handles shutters and awnings as a residential permit category with product approval review. Check your city or county building department.

Do all shutter types qualify for insurance discounts?

Any type can qualify in Florida if it is verified to the large-missile standard and documented, earning Level A on the wind mitigation form. Undocumented shutters drop to Level N. Decorative shutters earn nothing. Ask your insurer how much the credit is worth on your policy.

Do I need shutters if I have impact windows?

No. TDI says installing both is not necessary, and Florida code accepts impact-resistant glazing alone. Shutters over impact glass add a second layer, which some owners like for very exposed openings, but no code or insurer requires it. Make sure the windows are rated for your design pressure.

Are hurricane shutters required in Texas?

In TDI catastrophe areas within the windborne debris region, glazed openings need protection to get a WPI-8 certificate for TWIA insurance. That can be shutters or impact windows. Outside those areas, local codes decide. Ask your city building department or TDI's windstorm program.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration