Local Guide · Hurricane shutters and impact windows
How Do You Compare Impact Window and Shutter Quotes? 20 Questions to Ask Before You Sign
Two impact window quotes for the same house can look nothing alike. This guide gives you the questions to ask, a worksheet to line quotes up side by side, and plain-English warranty and contract rules for Florida and Texas.
To compare impact window or shutter quotes, make every bid list the same things for each opening: size, product type, its Florida approval number or Miami-Dade NOA (or Texas TDI evaluation), design pressure, glass type, anchoring method, stucco and trim repair, permit and inspection fees, and warranty terms. Then check the license, insurance and payment schedule. A low price that leaves any of these out is not a lower price, just a less complete quote.
Key facts
- Florida law bars selling or advertising a product as hurricane or wind-borne debris impact protection unless it is approved under s. 553.842 or s. 553.8425 (s. 553.842(5)).
- Miami-Dade window permits must show the positive and negative design pressure required for each window or door and the glass type chosen from the product approval's glass schedule.
- A Florida Specialty Structure Contractor may install AAMA 101/I.S.2 or TAS 201/202/203 window and door assemblies only in Group R buildings up to three stories or 30 feet (rule 61G4-15.015).
- Florida buyers can cancel a home solicitation sale until midnight of the third business day after signing (s. 501.025); Texas has a similar 3-business-day right (Bus. & Com. Code 601.051).
- In Texas, contracts of $1,000 or more to be paid from insurance must carry a 12-point bold deductible notice, and waiving or rebating a deductible is a Class B misdemeanor (Bus. & Com. Code 27.02).
- TDI advises coastal Texas owners not to make final payment until TDI issues the WPI-8 Certificate of Compliance for the work.
- Texas Business & Commerce Code ch. 58 bars disaster-remediation contractors without a one-year local business address from requiring payment before work begins.
- Unlicensed contracting during a Governor-declared state of emergency is a third-degree felony in Florida (s. 489.127).
Why do impact window and shutter quotes vary so much?
Homeowners in Miami, Tampa and Houston often get three quotes for the same house and find that the highest is double the lowest. Usually the bids are not describing the same job. The price of an impact window or shutter project depends on choices that many quotes never write down.
The biggest drivers are:
- Product type and frame material. Aluminum, vinyl and other frames, and fixed, single-hung, casement and sliding styles, all price differently. Large sliding glass doors are often the most expensive openings in the house.
- Design pressure. Design pressure (DP) is the wind load, in pounds per square foot, that a unit is rated to resist. A home near the coast or on an upper floor may need a higher rating, and higher-rated units cost more. Miami-Dade requires permit plans to show the required positive and negative design pressure of each window or door.
- Glass package. Laminated glass thickness, tint, low-E coatings and insulated laminated glass change both price and performance. Miami-Dade asks applicants to state the glass type and thickness chosen from the product approval's glass schedule.
- Installation method. Removing old frames and fixing rotted wood bucks, stucco and interior trim takes labor that a bare-bones quote may exclude.
- Permits, engineering and inspections. Some quotes include permit fees and any required wind calculations; others bill them later. In Texas catastrophe-area counties, the windstorm inspection and WPI-8 paperwork can be included or left to you.
- Season and demand. After a storm, demand for installers, glass and permits jumps across a region.
Labor is a real part of the bill. The U.S. Bureau of Labor Statistics reports that in May 2025 Florida glaziers earned a mean $23.32 an hour and Texas glaziers a mean $22.90 an hour, with Miami-area glaziers at $21.97 and Houston-area glaziers at $23.55. Those are wages, not the rate a company bills, which also covers insurance, overhead, vehicles and profit. Use the figures only to understand that installation is skilled labor, not to judge a quote line by line.
This guide does not quote installed prices. We could not find a named, dated, published cost study we could verify for impact windows or shutters in Florida or Texas. For pricing context see our impact window cost guide and shutter cost guide, and rely most on several written local bids.
The 20 questions to ask every contractor
Ask these in writing and keep the answers with your contract. A good contractor will not mind. A contractor who will not answer is giving you an answer.
License, insurance and who does the work
- What is your license number, and does it match the company name on the contract? In Florida, check it on the Department of Business and Professional Regulation (DBPR) license search. In Texas, see the licensing note below.
- Is your license the right type for my building? Florida's Specialty Structure Contractor may install rated window and door assemblies only in Group R (residential) buildings up to three stories or 30 feet (rule 61G4-15.015). A residential contractor is limited to homes of no more than two habitable stories above one uninhabitable story (s. 489.105). A condo tower needs a contractor whose license covers that height.
- Do you carry general liability and workers' compensation, and can I get the certificates sent directly from the insurer?
- Will your own employees install, or a subcontractor? If a subcontractor, get its name and license. Florida rule 61G4-15.015 lets general, building and residential contractors subcontract window and door installation to a Specialty Structure Contractor.
- Who will be my contact during the job, and who will be on site for inspections?
Product and approvals
- What is the Florida product approval number (FL#) or Miami-Dade NOA for each product? In Miami-Dade and Broward (the High-Velocity Hurricane Zone), make sure the approval is listed for HVHZ use. See how to look up an NOA and how to look up an FL#.
- In coastal Texas, is each product on TDI's product evaluation list or otherwise acceptable for a WPI-8? TDI tells owners to use opening protection tested to ASTM E1886 and ASTM E1996 and designated by a recognized product approval.
- What design pressure does each opening need, and what is each unit rated for? The rating must meet or exceed the requirement. See design pressure explained.
- Is each glazed unit rated for the large missile test? Under the Florida Building Code, glazed openings within 30 feet of grade must pass the large missile test of ASTM E1996.
- What glass is in each unit: laminated thickness, tint, low-E, insulated or not?
- Will the units meet bedroom emergency escape size rules? Florida's existing building code lets a replacement escape window be the manufacturer's largest standard size that fits the existing opening (FBC Existing Building 505.3).
Scope, permits and schedule
- Do you pull the permit, and are permit fees in the price? In Florida, when you hire a contractor, the contractor normally applies for the permit; if you apply as an owner-builder, you take on that legal responsibility.
- Is a wind load calculation or engineering needed, and who pays? Miami-Dade requires wind calculations for all openings in threshold buildings. For a same-size replacement on a one- or two-family home, FBC 107.1.1 can remove the need for sealed drawings if conditions are met.
- How will you remove the old windows, and what happens if the bucks or framing are rotten? Get a unit price for buck replacement in writing.
- Is stucco, drywall, paint and trim repair included, and to what finish?
- In Texas, will you file the WPI-1 notice before work starts and schedule the TDI or engineer inspection during installation? TDI inspectors inspect during construction, not after.
- What is the lead time for my products, and what is the install schedule once they arrive? Ask what happens if a storm approaches with openings removed. See lead times and hurricane season.
Money and paperwork
- What is the deposit and payment schedule, tied to what milestones?
- What exactly is the warranty on the product, the labor, the glass and the finish, and is it transferable?
- What documents will I get at the end? You want the final inspection result, the NOA or FL# paperwork for each product (Citizens recommends giving these to your wind mitigation inspector), and in Texas the WPI-8.
Quote comparison worksheet: how to line up bids
Copy this table for each quote. Fill in one row per opening (a window, door, slider or garage door). If a quote does not give you the information, write "not stated" and ask. Any blank is a risk you would be accepting.
| Item | Quote A | Quote B | Quote C |
|---|---|---|---|
| Opening ID and location (e.g., W3, rear bedroom) | |||
| Size (width x height) | |||
| Product type (impact window, door, accordion, roll-down, panel) | |||
| FL# or Miami-Dade NOA (HVHZ or non-HVHZ); TDI evaluation in Texas | |||
| Required design pressure (+/- psf) and product rating | |||
| Missile level (large or small missile) | |||
| Glass makeup (laminated, insulated, tint, low-E) | |||
| Frame material and color | |||
| Installation method (full frame or insert) and anchors per approval | |||
| Buck repair or replacement (included or unit price) | |||
| Stucco, drywall, trim and paint repair | |||
| Permit and fees included | |||
| Engineering or wind calculations included | |||
| Texas: WPI-1 filing, inspection and WPI-8 included | |||
| Debris removal and disposal | |||
| Product warranty (years, what is covered) | |||
| Labor warranty (years) | |||
| Glass breakage coverage | |||
| Transferability | |||
| Deposit and payment milestones | |||
| Estimated lead time and install days | |||
| Total price |
How to read the worksheet
Step 1: match the scope. Count openings. If Quote A covers 14 openings and Quote B covers 12, you are not comparing the same job. Ask why. Some contractors skip a small bathroom window or garage door, which can matter later. On Florida's 2026 wind mitigation form (OIR-B1-1802 Rev. 04/26), opening protection is rated by the weakest glazed opening, so one unprotected window can drop the whole house to a lower rating.
Step 2: match the product. Two windows can both be "impact" but carry different design pressures, glass and approvals. Look up each FL# or NOA and check it lists the size and pressure you need.
Step 3: price the gaps. If one quote includes stucco repair and permit fees and another does not, ask the second contractor to price them. Add those numbers before comparing totals.
Step 4: compare the terms. Payment schedule, warranty and cancellation terms are part of the price. A lower bid that asks for most of the money up front carries more risk than a higher bid paid at milestones.
Step 5: ask about outliers. A quote far below the others may have left something out, may use a product without the right approval, or may come from a contractor who plans to change the price later through change orders.
What should every written quote include?
Before you sign, the quote or contract should list:
- The contractor's legal name, address, phone and license number.
- Every opening, with size, product, approval number and design pressure.
- Who pulls the permit and whether fees are included.
- Removal and disposal of old units, buck repair terms, and finish repair.
- Start window, expected install days, and what happens if products are delayed.
- Payment amounts tied to milestones such as delivery, installation and final inspection.
- Warranty documents, or at least the name of each warranty and its term.
- Your cancellation rights, if the sale was made in your home.
Florida's 553.842(5) makes it illegal to market a product as hurricane or wind-borne debris impact protection unless it holds a state or local approval, and violators face the Florida Deceptive and Unfair Trade Practices Act. That is one more reason to have the approval numbers in writing.
In Texas, TDI tells consumers to get at least three written bids, read every document before signing, never sign a contract with blank spaces, and make sure the contract lists the materials. It also warns against contracts saying "Homeowner agrees to the listed repairs for the value of insurance proceeds," because the contractor would then get every dollar of your insurance payment.
Texas: putting the WPI-8 in the quote
If you live in one of Texas's first-tier coastal counties (Aransas, Brazoria, Calhoun, Cameron, Chambers, Galveston, Jefferson, Kenedy, Kleberg, Matagorda, Nueces, Refugio, San Patricio and Willacy) or in La Porte, Morgan's Point, Pasadena, Seabrook or Shoreacres east of Highway 146 in Harris County, your new windows, entry doors and garage doors need a windstorm Certificate of Compliance (WPI-8) for coverage through the Texas Windstorm Insurance Association (TWIA).
Make the quote say who does each step:
- Filing Form WPI-1 with TDI before construction starts.
- Scheduling the inspection during installation. TDI inspectors must see the work while it is being built. TDI does not charge for its inspectors and aims to inspect within 48 hours of the requested date, excluding weekends and holidays. A Texas-licensed engineer can inspect after completion, but TDI says that can be more invasive and more expensive.
- Products that qualify. Since April 1, 2026, WPI-8 applications must be certified to the 2024 International Residential Code or International Building Code, and TDI says most catastrophe areas are now in the windborne debris region under those codes.
- Final payment held until the WPI-8 is issued. TDI advises exactly this.
Houston, Dallas, San Antonio and Austin are outside the TDI windstorm program, so there is no WPI-8. Your city permit rules still apply. See WPI-8 certification for windows.
Florida: approvals, licensing and the HVHZ
For each opening, a Florida quote should name the FL# from the Florida Building Commission or the Miami-Dade NOA. Miami-Dade accepts both for window, door and garage door permits. In the HVHZ, check that the approval is in the HVHZ category; Miami-Dade's product search separates HVHZ and non-HVHZ approvals.
Florida also licenses the work itself:
- Florida's Specialty Structure Contractor category covers hurricane protection devices and windows and doors, with the height limit described above for rated window assemblies.
- DBPR also lists a Window and Door Installation specialty contractor certification.
- Local governments cannot require a license for work that does not match a state category, but window and shutter installation does match state categories (s. 489.117).
Big condo jobs carry extra rules. Since a Building Officials Association of Florida interpretation of FBC 110.8.1 was ratified on January 26, 2026, window and door installs in threshold buildings (more than three stories or more than 50 feet tall, among others) need a threshold inspection by a state-certified special inspector plus a special inspection plan. Ask any condo contractor how they handle that. See high-rise condo window projects.
Texas licensing: what to check instead
Florida has a state licensing board for window and shutter contractors. We found no comparable Texas state license category for window or shutter installation. Before you hire in Houston, Dallas, San Antonio, Austin or a coastal town, ask your city building department whether it requires contractor registration for this work.
Then check what Texas law does regulate:
- Deposits after a disaster. Texas Business & Commerce Code ch. 58 requires written contracts for disaster remediation and bars the contractor from requiring payment before work begins. The rule does not apply to contractors that have kept a physical business address for at least a year in your county or an adjacent county.
- Deductibles. Contracts of $1,000 or more paid from insurance must include a bold notice that you are responsible for your deductible. A seller who waives, absorbs or rebates it commits a Class B misdemeanor (Bus. & Com. Code 27.02).
- Public adjusting. A contractor may not act as a public adjuster on a property it repairs, even with a public adjuster license (Ins. Code 4102.163).
- Price gouging. During a declared disaster, the Texas Deceptive Trade Practices Act bars exorbitant prices for building materials and other necessities.
For more, see Texas contractor rules.
How do impact window and shutter warranties work?
A warranty is a promise from a specific company about a specific part of the job. Most projects come with more than one. Read each one, because the words "lifetime warranty" in a sales pitch can mean very different things.
| Warranty type | Who usually gives it | What it typically covers | Questions to ask |
|---|---|---|---|
| Product (frame, hardware, shutter) | Manufacturer | Defects in materials and workmanship of the product | How many years? Is it prorated? Does it cover parts only, or parts and labor? |
| Insulated glass seal | Manufacturer | Fogging or moisture between panes of insulated units | Is the seal covered for the same term as the frame? |
| Laminated glass | Manufacturer | Delamination, bubbling or defects in the interlayer | Is delamination covered, and for how long? |
| Glass breakage | Some manufacturers or dealers, often optional | Accidental breakage, sometimes for a limited time | Is storm damage excluded? Is there a cap or deductible? |
| Installation labor | Installing contractor | Leaks, operation and fit problems caused by installation | How many years? What if the company closes? |
| Finish or coating | Manufacturer | Fading, chalking, peeling of frame paint | Is there a coastal or salt-air limit? |
Common exclusions
- Coastal and salt-air limits. Some warranties shorten coverage or require extra cleaning for homes within a set distance of salt water.
- Improper installation. If the installer did not follow the approval or instructions, the manufacturer may deny a claim. Florida requires shutters to be installed per the manufacturer's instructions and the product approval (FBC 1709.9.4), and window assemblies to be anchored per the manufacturer's published recommendations (FBC 1710.2).
- Lack of maintenance. Dirty tracks, unlubricated shutter parts and damaged weep holes are common reasons for denial. See shutter maintenance.
- Acts of nature and storm damage. Many warranties exclude damage from hurricanes, flying debris or flood. That is a job for your insurance, not the warranty.
- Modifications. Aftermarket film, drilling into frames or painting vinyl can void coverage.
Transferability
If you might sell, ask whether the product and labor warranties transfer to the next owner, whether a fee or registration is required, and whether the term shortens on transfer. Get the answer in writing. Registered warranties are easier to prove, so register products promptly if the manufacturer asks you to.
Watch the company behind the labor warranty. A ten-year labor warranty from a contractor that closes next year is worth little. Some homeowners ask whether the manufacturer backs the installer's labor through a certified-installer program; if so, get the details in writing.
Dealer, manufacturer network or independent installer?
In Florida and Texas, most impact products are sold through dealers and installers, not direct from the factory. You will hear several setups:
- Authorized dealer or certified installer. The contractor buys from one or more manufacturers and may be trained on their systems. Ask whether the manufacturer offers any extra warranty when its certified installers do the work.
- Multi-brand dealer. Can quote several product lines so you can compare. Make sure each product line's approval covers your sizes and pressures.
- General contractor with a subcontractor. Common for remodels and condo projects. Get both licenses, and know who you call when something leaks.
Common product names in Florida showrooms include large regional and national window manufacturers. The Chronicle does not rank or recommend brands. What matters for safety and insurance is the approval, the rating for your opening, and correct installation, all of which you can check yourself.
Deposits, payment schedules and cancellation rights
Impact products are usually made to order for your opening sizes, so contractors often ask for a deposit before ordering. That is normal. A large deposit to a company you cannot verify is not.
Protect your money
- Tie payments to milestones: order, delivery, installation, and a final payment after the final inspection passes. Miami-Dade advises homeowners not to make final payment until proof of the final inspection is provided, and says progress payments should roughly match the work done.
- Pay the company, not an individual, and never in cash. Miami-Dade notes licensed contractors will almost always have a separate business account.
- In Texas, after a disaster, out-of-town contractors may not require payment before they start work (Bus. & Com. Code ch. 58; TDI).
Cancellation rights
If the sale was made at your home rather than at the seller's business, both states give you a short window to change your mind:
| Florida | Texas | |
|---|---|---|
| Law | s. 501.021 to 501.055, F.S. | Bus. & Com. Code ch. 601 |
| Applies to | Consumer sales over $25 made by personal solicitation away from the seller's business (not if you asked for the specific goods or service) | Goods or services over $25 solicited away from the merchant's place of business |
| Deadline | Midnight of the third business day after signing (Sundays and federal holidays excluded) | Midnight of the third business day after signing |
| How | Written notice, in person, by telegram or by mail (effective on postmark) | Written notice per the contract's cancellation form |
| Refund | Seller may not keep any cash down payment | Refund within 10 business days |
Florida's 10-day post-emergency cancellation right in s. 489.147 applies to roof contracts; it does not cover window or shutter contracts. For more, see contracts and cancellation rights.
Red flags that should end the conversation
- No license number, or a license under a different name. Miami-Dade warns against contractors who show only a business tax receipt or occupational license number instead of a contractor license.
- No approval numbers for the products, or "it's hurricane rated" with nothing in writing.
- Pressure to sign today for a "storm special." TDI lists "specials" and "extra-cheap work" among warning signs.
- Offers to waive or absorb your deductible.
- A request to sign a document called an "estimate" or "release" that is really a contract or an assignment of your insurance benefits.
- Cash-only payment or a check made out to a person.
- Only out-of-state references, no local address, no insurance or bond (TDI).
- Offering to interpret your policy or negotiate your claim. In Florida, a contractor may not perform public adjuster services without a public adjuster license (s. 626.854).
Unlicensed contracting during a declared state of emergency in Florida is a third-degree felony (s. 489.127). Report it to DBPR. In Texas, report deductible offers to the Attorney General's consumer line (800-621-0508, per TDI). See storm-chaser scams and how to file a complaint.
References, job photos and reviews: what to ask for
Ask for three recent local jobs of a similar size and type, ideally with the permit numbers. You can look up most permits on county or city portals, which tells you the job was permitted and passed inspection.
- Ask the reference whether the job finished on schedule, whether stucco and trim were repaired well, and how the company handled a problem.
- Ask for photos of buck repairs and anchoring, not just finished windows.
- For condos, ask for a building the contractor completed and the property manager's contact.
- Read complaints on the state licensing site and county consumer protection pages, not just star ratings.
How to choose a provider
- Get at least three written bids on letterhead with address and phone (TDI and My Safe Florida Home both recommend three).
- Verify the Florida license on the DBPR search, and that the license type fits your building height.
- Get insurance certificates sent directly from the insurer.
- Fill in the worksheet for every opening; mark anything not stated.
- Look up each FL# or NOA and confirm size, design pressure and HVHZ status.
- In coastal Texas, confirm the quote covers WPI-1 filing, the inspection and the WPI-8.
- Ask for a unit price for rotten buck or framing repair.
- Read each warranty: product, glass, labor, finish, transfer rules and exclusions.
- Tie payments to milestones and hold the final payment until the final inspection (and WPI-8 in Texas).
- If sold in your home, note your 3-business-day cancellation deadline.
- Collect approvals and final inspection paperwork for your wind mitigation inspection.
Related hurricane shutters and impact windows guides
- Who Can Install Impact Windows and Hurricane Shutters in Florida? Contractor Licensing Under Chapter 489
- Do Texas Window and Shutter Installers Need a License? Registration, Windstorm Inspections and How to Vet Them
- Impact Window and Shutter Contracts: What Must Be in Writing, and Do You Have 3 Days to Cancel?
- How Do You Spot Hurricane Window and Shutter Scams and Storm Chasers?
- What Happens During Impact Window Installation? Bucks, Anchors, Stucco and Inspections Step by Step
- How Much Do Impact Windows Cost in Florida and Texas? Per Window, Per House and What Drives the Price
- How Do You Look Up a Miami-Dade NOA (Notice of Acceptance) and Read It?
- Design Pressure (DP) Ratings Explained: What Do DP50 and +60/-70 psf Mean for Your Windows?
Hurricane shutters and impact windows by state and city
Questions people ask
What questions should I ask an impact window contractor?
Ask for the license number and type, insurance certificates, whether employees or subcontractors install, the FL# or NOA (or Texas TDI evaluation) and design pressure for every opening, the glass package, who pulls permits, how rotten bucks are handled, what finish repair is included, the lead time, the payment schedule, and the full warranty terms. In coastal Texas also ask who files the WPI-1 and gets the WPI-8. Get all answers in writing.
How long is the lead time for impact windows?
It varies with the manufacturer, product line, season and whether a recent storm raised demand. Because units are made to your sizes, there is usually a wait between signing and installation, and a separate permit review. Ask each contractor for the current lead time in writing and what happens if products arrive late or a storm approaches with openings open. See our lead times and hurricane season guide for planning advice.
Should I get a wind load calculation?
Ask whether your job needs one. Miami-Dade requires wind calculations for all openings in threshold buildings. For a same-size replacement on a one- or two-family home, FBC 107.1.1 can remove the need for sealed drawings if the units are installed per the manufacturer's instructions for the wind zone and meet current design pressures. Either way, the quote should state the required design pressure for each opening.
Should I pay a large deposit?
Pay only what is reasonable to order custom products, and pay the company by check or card, never cash. Tie later payments to delivery, installation and final inspection. Miami-Dade says upfront payments should be only part of the work and final payment should wait for proof of final inspection. In Texas, after a disaster, out-of-town contractors may not require payment before work begins.
Is glass breakage covered by the warranty?
Often not by the standard product warranty. Some manufacturers or dealers offer limited or optional glass breakage coverage, and many exclude storm and debris damage. Ask whether breakage is covered, for how long, whether it is capped, and whether hurricanes are excluded. Hurricane damage is usually an insurance claim instead. Read the actual warranty document, not the brochure.
Are seal failures covered?
For insulated glass units, manufacturers usually cover seal failure, which shows up as fogging between panes, for a stated period. Laminated glass may have a separate delamination term. Ask whether seal and delamination coverage last as long as the frame warranty and whether labor to replace the glass is included.
Is labor included in the warranty?
Labor is often split. The manufacturer covers the product, and the installing contractor covers installation workmanship for its own term. Some manufacturer warranties cover replacement parts only. Ask both companies who pays to remove and reinstall a defective unit, and get both terms in writing.
Is the warranty transferable to a new owner?
Some are and some are not, and some shorten or require registration and a fee on transfer. If you might sell, ask before you sign and get the transfer terms in writing. Keep the warranty documents, approvals and permit records together so a buyer can see what was installed.
What voids an impact window warranty?
Common reasons include installation that did not follow the product approval or manufacturer instructions, lack of required cleaning and maintenance, aftermarket film or coatings, drilling or modifying frames, and painting materials not meant to be painted. Coastal homes may face extra maintenance conditions. Ask for the exclusions list before you sign.
Who handles permits and inspections?
Usually the contractor pulls the permit and schedules inspections, but confirm it in the contract and ask whether permit fees are included. If you act as an owner-builder in Florida, you take on that legal responsibility. In Texas catastrophe-area counties, the WPI-1 notice must be filed before work starts and inspections happen during installation.
Is the installer an employee or a subcontractor, and does it matter?
It matters because you need to know who is licensed, insured and responsible. Florida lets general, building and residential contractors subcontract window and door installation to Specialty Structure Contractors. Ask for the subcontractor's name and license, and make sure your contract says the prime contractor remains responsible for the work and warranty.
Sources
- Florida Statutes s. 553.842, Product evaluation and approval
- Miami-Dade County: Windows, Shutters, Doors and Security Bars permits
- Miami-Dade County: Hiring contractors
- Miami-Dade Product Control search
- Florida Administrative Code rule 61G4-15.015 (Specialty Structure Contractor)
- Florida Statutes s. 489.105, Definitions
- Florida Statutes s. 489.117
- Florida Statutes s. 489.127
- Florida Statutes s. 489.147
- Florida Statutes s. 501.025, Home solicitation sale; buyer's right to cancel
- Florida Statutes s. 501.021
- Florida Statutes s. 626.854, Public adjusters
- Florida DBPR Construction Industry Licensing
- Florida Building Code 2023, Chapter 1 (107.1.1)
- Florida Building Code 2023, Chapter 16 (1609.1.2)
- Florida Building Code 2023, Chapter 17 (1709, 1710)
- Florida Existing Building Code 2023, Chapter 5 (505.3)
- Florida OIR Form OIR-B1-1802 Rev. 04/26
- Citizens Property Insurance: Your wind inspection
- Texas Department of Insurance: How to avoid contracting scams
- TDI: Making repairs after a storm
- TDI: Windstorm inspection process
- TDI: Adopted codes for windstorm certification
- TDI: Protecting openings FAQ
- TDI: General windstorm questions
- TWIA: Windstorm certification
- Texas Business & Commerce Code ch. 601
- Texas Business & Commerce Code ch. 58
- Texas Business & Commerce Code ch. 27
- Texas Business & Commerce Code ch. 17 (DTPA)
- Texas Insurance Code ch. 4102
- U.S. Bureau of Labor Statistics OEWS data (May 2025)
- My Safe Florida Home homepage (Internet Archive, Oct. 21, 2026)
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


