Local Guide · Hurricane shutters and impact windows
How Much Do Impact Windows Cost in Florida and Texas? Per Window, Per House and What Drives the Price
What published cost guides actually say about impact window prices, why their numbers disagree, every factor that moves a quote up or down, the hidden costs most estimates leave out, permit fees, the My Safe Florida Home grant offset and a quote-comparison checklist.
Published national cost guides put impact windows at roughly $1,500 to $2,800 per window installed (Today's Homeowner, updated September 2025), with large custom units costing more and some guides citing $55 to $62 per square foot. A whole-house project commonly runs well into five figures. Size, design pressure, glass, frame, HVHZ approval, floor height and wall repairs drive the price. Get at least three itemized quotes for your exact openings.
Key facts
- Today's Homeowner (updated Sept. 3, 2025) lists impact windows at $1,500 to $2,800 per window and full installation projects at $13,500 to $16,000.
- Bob Vila's hurricane window cost guide (last modified June 9, 2023) gives a typical project range of $3,083 to $15,721 and high-impact windows at $55 to $62 per square foot.
- Both guides list permits at $50 to $200 and removal of old windows at about $50 per window, as national figures.
- Miami-Dade's fee schedule effective Oct. 1, 2026 charges $150.82 for a single-family window or door installation permit and $133.38 for an exact change-out under its residential hardening permit type, plus surcharges.
- BLS (May 2025) reports a mean hourly wage of $23.32 for Florida glaziers and $22.90 for Texas glaziers; Miami-Fort Lauderdale-West Palm Beach glaziers averaged $21.97.
- My Safe Florida Home matches $2 of state money for every $1 from the homeowner, up to $10,000 from the state, so a maximum grant covers $10,000 of a $15,000 project (Fla. Stat. 215.5586).
- The My Safe Florida Home applicant portal has been offline since Nov. 10, 2026 while the program moves to a new platform.
- TDI windstorm inspectors in Texas charge no inspection fee; TDI does not regulate what private engineers charge for windstorm inspections.
- A first-time Miami-Dade product approval (NOA) costs a manufacturer $4,000 plus a 7.5% surcharge and lasts five years, one reason HVHZ-approved products cost more to bring to market.
What do impact windows cost? What the published numbers say
There is no official, government-published price for impact windows in Florida or Texas. The numbers you see online come from consumer cost guides that survey contractors and published prices. We loaded the main ones directly. Here is what they say, with their dates.
| Source (date) | Per window | Whole project | Other figures |
|---|---|---|---|
| Today's Homeowner, hurricane windows cost guide (updated Sept. 3, 2025) | $1,500 to $2,800; about $1,800 average | $13,500 to $16,000 for full installation projects | $55 to $62 per sq ft; labor $40 to $65 per hour |
| Bob Vila, hurricane windows cost guide (last modified June 9, 2023) | $100 to $2,100 depending on style and options | $3,083 to $15,721; $10,005 average | High-impact windows $55 to $62 per sq ft; labor $80 to $400 per window |
| Fixr, hurricane shutters cost guide (updated Jan. 31, 2025), comparison figure | Not given | $3,500 to $10,500 for impact windows on a whole house, in its shutter comparison | Shutters on the same home: $2,500 to $8,000 |
Two cautions before you use any of these numbers:
- They are national. None of these guides separates Miami-Dade and Broward, where products must meet High-Velocity Hurricane Zone standards, from the rest of Florida or from the Texas coast.
- They disagree, sometimes inside the same article. Some line items in these guides (for example frame-material prices of $90 to $400 per window) are far below their own per-window installed averages, which suggests they mix material-only and installed prices. Treat the ranges as a sanity check, not a price list.
The practical takeaway: a typical impact window, installed with permit, has commonly been quoted in the low-to-mid four figures per opening, large sliding doors and custom units cost much more, and a whole-house job is a five-figure project for most homes. Your own number depends on the factors below and can only come from itemized quotes.
Cost per window by size and style
Window size is the single biggest driver. Today's Homeowner's 2025 guide gives these per-window figures by size, and notes custom sizes can cost up to three times more:
| Window size | Per window (Today's Homeowner, 2025) |
|---|---|
| 24 x 36 inches | about $300 |
| 36 x 48 inches | about $600 |
| 48 x 60 inches | about $1,000 |
| Custom sizes | up to three times more |
These size figures are much lower than the same guide's $1,500 to $2,800 headline range, which likely includes installation, permits and typical options. Use them to see how price scales with size, not as installed prices.
Both guides give the same per-window ranges by style:
| Style | Per window (Today's Homeowner 2025; Bob Vila 2023) | Why it costs what it does |
|---|---|---|
| Fixed (picture) | $100 to $1,600 | No moving parts, but large fixed units need thicker glass |
| Single-hung | $300 to $1,500 | One operable sash; common in Florida block homes |
| Double-hung | $450 to $1,700 | Two operable sashes, more hardware and seals |
| Sliding (horizontal roller) | $550 to $1,400 | Track and interlock must resist pressure and water |
| Architectural (shapes, arches) | $350 to $2,100 | Custom fabrication and testing limits |
Casement and awning windows are not broken out in these guides. They often seal well against wind-driven rain because the sash presses into the frame, but hardware adds cost. Ask for them priced separately.
Fair price per square foot of glass
Both guides cite $55 to $62 per square foot for high-impact windows, and Today's Homeowner notes exterior storm windows can reach about $62 per square foot. To compare quotes on that basis, add up the rough opening area of every window on each quote (width x height in inches, divided by 144) and divide the total price by it. Example: ten 36 x 60 inch windows are 15 square feet each, 150 square feet in all. A $15,000 quote works out to $100 per square foot. That is well above the published figure, which is a reason to ask what is included (permits, stucco, HVHZ products, higher design pressures) rather than proof of overpricing. Small windows always cost more per square foot than big ones because the frame and labor are a larger share.
What does it cost to replace all the windows in a 2,000 sq ft house?
No source we loaded publishes a reliable price by house square footage, and a square-footage number would mislead you anyway. A 2,000 square foot house can have 12 windows or 30, plus one or three sliding doors. Price the openings, not the floor area.
A simple way to build your own estimate before you call installers:
- Count and measure every opening: windows, sliding doors, French doors, entry doors with glass, transoms and sidelights. Write down width and height.
- Group them by size: small (bathroom and kitchen), standard bedroom windows, large picture or living room units, and doors.
- Apply a range. For a rough check, apply the published per-window range to the windows and price doors separately (they cost several times more than a typical window).
- Add the extras from the hidden-cost list below: permits, stucco and drywall repair, buck replacement, engineering, disposal.
Illustration only: a house with 16 windows at the $1,500 to $2,800 published range comes to $24,000 to $44,800 for the windows alone, before doors and extras. Today's Homeowner's separate $13,500 to $16,000 "full project" figure shows how much these national ranges vary; your quotes may land above or below either number. In Miami-Dade and Broward, expect the HVHZ, design pressure and permit requirements to push toward the upper end.
Many homeowners phase the work. In Florida's wind-borne debris region, homes built under older codes may replace up to 25% of their total glazed area in any 12-month period without adding opening protection (FBC Existing Building 707.4), but non-impact replacements will not earn wind mitigation credit. Because the mitigation form rates the house by its weakest opening, a partly protected house usually gets little or no opening-protection discount until every opening is covered. Phasing with impact units, or using shutters on the remaining openings, keeps that path open.
Why are impact windows so expensive?
Compared with a standard replacement window, an impact window costs more for reasons you can see on the spec sheet:
- Laminated glass. Impact glass is two or more glass layers bonded to a plastic interlayer. NOAs list the interlayer products used, and each interlayer has its own approval. Thicker interlayers and heavier glass are needed for larger sizes and higher pressures.
- Heavier frames and reinforcement. The frame, sash, interlocks and anchors must hold the glass in place after it cracks, through 9,000 pressure cycles in HVHZ testing (FBC Table 1626).
- Testing and approvals. Every product line must pass impact, pressure, air and water tests at certified labs and hold a Florida approval or Miami-Dade NOA. A first-time NOA alone costs a manufacturer $4,000 plus a 7.5% surcharge and must be renewed every five years at $1,500, and each new size or option may need a revision.
- Labor. Impact units are heavy, often need two or more installers, and must be anchored exactly as the approval drawings show. BLS data (May 2025) show glazier mean wages of $23.32 an hour in Florida and $22.90 in Texas; installers' billed rates include overhead, insurance and profit, which is why cost guides list labor at $40 to $65 per hour or more.
- Permits and inspections. Opening protection work needs a permit almost everywhere in coastal Florida, and in the Texas catastrophe area it needs a windstorm inspection for TWIA eligibility.
- Wall work. In Florida block homes, removing an old window often damages stucco and the wood buck around the opening, which must be repaired.
What drives the price up or down: the full list
| Factor | Pushes price up | Pushes price down |
|---|---|---|
| Size | Large and custom sizes (up to 3x more, per Today's Homeowner) | Standard sizes |
| Design pressure (DP) | High DP for beachfront, upper floors, corners and Exposure D sites | Inland, sheltered, ground-floor openings |
| Missile rating | Large missile (required up to 30 ft) and HVHZ approval | Small-missile-only products above 30 ft (where allowed) |
| Operation | Operable units: casement, double-hung, sliders | Fixed units in the same size |
| Frame | Thermally broken aluminum, heavy commercial frames, custom colors | Standard white aluminum or vinyl |
| Glass | Insulated laminated (two panes plus laminate), Low-E, tint, obscure glass, thicker interlayer | Clear monolithic laminated glass |
| Color and finish | Bronze, black or custom painted frames; wood-look finishes | White |
| Grids and extras | Internal grids, screens, special hardware | No grids |
| Location on house | Second floor and above; hard access over roofs or landscaping | Ground floor with open access |
| Wall type and condition | Rotted bucks, damaged stucco, wood-frame walls needing new openings | Sound block walls with good bucks |
| Building type | Condos and threshold buildings (engineering, special inspection, crane or swing-stage access) | Single-family homes |
| Timing | Rush jobs, post-storm demand | Flexible schedule |
Low-E, tint and insulated glass
Low-E coatings and tints reduce solar heat gain, which matters in Florida and South Texas, and are common adders. Insulated laminated glass (an impact laminate plus a second pane with an air or gas space) costs more again, but improves energy performance and sound control. Bob Vila's 2023 guide lists Low-E and tinted glass options at $125 to $400 per window and laminated glass at $150 to $400; treat those as upgrade costs, not complete prices. See energy efficiency and noise with impact windows.
Design pressure
Higher design pressure ratings usually mean thicker glass, stronger frames and more anchors. A beachfront Galveston or Miami Beach home, or a high-floor condo, will need much higher ratings than an inland Orlando home. Do not let a quote under-specify DP to look cheaper: Miami-Dade's permit checklist requires plans to show the required positive and negative pressure for each opening. See design pressure ratings explained.
Labor: how installers price it and how long the work takes
Most impact window quotes roll labor into a per-opening price, but it helps to know what the labor share looks like so you can judge add-ons and change orders.
- Hourly rates. Today's Homeowner (2025) lists installer labor at $40 to $65 per hour, and Bob Vila (2023) at $30 to $65 per hour or $80 to $400 per window. Fixr's 2025 shutter guide lists installer labor at $45 to $100 per hour. These are billed rates; BLS wage data show what installers are paid, which is lower.
- Time per opening. Bob Vila's guide estimates about two hours per window, with second-floor windows taking about twice as long. Heavy impact sliders and large picture windows take longer and need more people.
- Whole-house schedule. A typical single-family job is often installed over several days, opening by opening, so the house is never left open overnight. Ask how many openings the crew will do per day and how they will secure any opening left unfinished.
- Change orders. The most common surprise is rotted or undersized wood bucks found once the old window comes out. Ask for a unit price for buck replacement in the contract so the change order is predictable.
Florida's licensing rules affect who can do the labor. A Specialty Structure Contractor may install window and door assemblies only in Group R buildings up to three stories or 30 feet (Florida Administrative Code 61G4-15.015). For taller buildings, a general, building or residential contractor (within their scopes) must hold the contract and may subcontract the installation. Unlicensed contracting during a declared state of emergency is a third-degree felony in Florida (489.127). See Florida licensing for installers.
Frame material and coastal conditions
Frame choice changes price, appearance and how the window holds up near salt water.
| Frame | Per-window figure in cost guides | Notes for Florida and Texas |
|---|---|---|
| Aluminum | $90 to $275 (Bob Vila 2023; listed as steel/aluminum by Today's Homeowner 2025) | The most common impact frame in South Florida; strong and slim. Thermally broken versions cost more but conduct less heat. Ask about coatings and maintenance near salt air. |
| Vinyl | $100 to $300 (both guides); vinyl hurricane windows $500 to $1,000 (Today's Homeowner) | Better insulation; frames are often reinforced with metal for impact ratings. Large sizes may be limited by the approval. |
| Wood or clad wood | $175 to $400 (both guides) | Often chosen for historic homes; impact versions are less common and usually cost more. |
These frame figures look like product or upgrade prices rather than complete installed prices, so do not add them to a per-window installed figure. Their value is relative: they show aluminum and vinyl in a similar range and wood above both.
Near the coast, ask the installer which anchors and fasteners the approval calls for and whether they are stainless or coated. The Florida Building Code panel exception, for example, requires corrosion-resistant hardware, and approvals for windows specify their own anchors. Corroded hardware is a common reason older protection fails or is marked damaged on a wind mitigation inspection, which can cost you the discount entirely: Florida's 2026 form says homes with openings needing replacement do not qualify for wind mitigation rate differentials.
Hidden costs: stucco, drywall returns, bucks, permits and engineering
The cheapest quote is often the one that leaves these out. Ask each installer whether each item is included, excluded, or priced as an allowance.
- Removal and disposal. Both national guides cite about $50 per window to remove the old unit.
- Stucco repair. In concrete block homes, the old window is usually cut out, which breaks the stucco around the opening. The new window must be sealed and the stucco patched and painted. Ask whether patching is included and whether painting is full-wall or touch-up, since patched stucco rarely matches old paint.
- Drywall or plaster returns. Inside, the wall return (the surface between the window and the interior wall) may be damaged or need new trim, sills or drywall. Some installers exclude interior finish work.
- Wood bucks. Florida block homes often have a wood buck, a wood frame fastened into the concrete opening, that the window anchors into. Rotted or undersized bucks must be replaced. Miami-Dade now requires wood buck calculations for threshold buildings when bucks are 1-1/2 inches or thicker.
- Permits. See the next section. Cost guides cite $50 to $200 nationally; your city or county sets the real fee.
- Engineering. FBC 107.1.1 says sealed drawings are not required to replace windows and doors on an existing one- or two-family home or townhouse if the units are installed per the manufacturer's instructions for the wind zone, meet current FBC Residential design pressures, are the same size in the same opening, and the instructions are submitted with the permit. Enlarging an opening, condos, threshold buildings, custom units and unusual walls usually require an engineer.
- Threshold inspections. Since a binding interpretation ratified January 26, 2026, all window and door installations in threshold buildings (more than three stories or 50 feet) in Florida need a threshold inspection by a state-certified Special Inspector and a special inspection plan from the engineer of record. That is a real added cost for condo owners.
- Code-triggered extras. FBC Existing Building 702.4 can require window fall-prevention devices when certain operable windows are replaced, depending on sill height. Bedroom egress openings must remain usable; 505.3 lets you use the manufacturer's largest standard size that fits the existing opening.
- Security, blinds and alarms. Alarm contacts, blinds, shutters, awnings and curtain rods may need to come off and go back on.
- Wind mitigation re-inspection. You need a new inspection to claim the discount; Fixr's 2025 guide cites about $100 for a wind mitigation inspection.
Are installation and permits included in a quote?
Usually installation is included, and reputable installers include the permit. But "included" can mean different things. Ask for each to be written on the quote.
What permits cost: examples
| Jurisdiction | Fee (where published) |
|---|---|
| Unincorporated Miami-Dade (Implementing Order 4-63, eff. Oct. 1, 2026) | Single-family window/door installation: $150.82. Exact change-out under the residential hardening permit type: $133.38 plus a $25.65 up-front fee. Owner-builder: $0.072 per sq ft of window or door area. Commercial: $0.164 per sq ft. Add a 7.5% county surcharge and state surcharges of 1% and 1.5%. |
| City of Tampa | Shutters and awnings are a residential permit category; some projects qualify for the city's "Fast Pass-Same Day" application. Check the city's current fee schedule. |
| National cost guides | $50 to $200 (Today's Homeowner 2025; Bob Vila 2023) |
Cities inside Miami-Dade (Miami, Hialeah, Miami Beach and others), all Broward cities, and the cities of Orlando, Jacksonville and Tampa run their own building departments and fee schedules. Look up yours before comparing quotes, so you know whether a quote's permit line is realistic.
After a declared disaster, some cities relax permits for certain like-for-like repairs. Tampa's 2026 post-hurricane guide waives permits for size-for-size front or rear exterior door replacement only when the Mayor's emergency powers are in effect, and still requires a permit for garage doors. Do not assume a window replacement is exempt. See hurricane window permits in Florida.
Do HVHZ products cost more? Miami vs. Tampa vs. Jacksonville
None of the cost guides we loaded publishes reliable city-by-city impact window prices, and we will not invent them. What we can tell you is which cost factors differ by city.
| Area | What pushes cost | Glazier mean hourly wage (BLS, May 2025) |
|---|---|---|
| Miami-Fort Lauderdale-West Palm Beach | HVHZ products required in Miami-Dade and Broward; high design pressures near the coast; many condos and threshold buildings | $21.97 |
| Tampa-St. Petersburg-Clearwater | Wind-borne debris region along the coast; post-Helene and Milton demand | $24.35 |
| Orlando-Kissimmee-Sanford | Inland; opening protection may not be required by code at many sites, so non-impact options exist | $24.18 |
| Jacksonville | Coastal debris region near the beaches; lower wind speeds inland | $24.33 |
| Houston (metro) | Only the TDI catastrophe area (east of SH 146 in listed cities, plus Galveston and other coastal counties) needs WPI-8; most of Houston follows local code | $23.55 |
Wages are only part of an installer's price, and the wage data do not capture overhead, demand or product cost. HVHZ-approved products cost more mainly because they are built and tested to tougher standards. If you are outside Miami-Dade and Broward and are quoted an HVHZ product, ask for a non-HVHZ alternative priced side by side, then decide whether the extra protection is worth it to you.
Are impact windows cheaper in Texas?
We found no reliable published comparison of installed prices between the two states. Texas does not have an HVHZ or a statewide product approval system like Florida's, which can widen product choice. On the other hand, homes in the Texas catastrophe area need TDI windstorm certification, and under the 2024 codes TDI says most of those areas are now in the wind-borne debris region, so impact-rated products or shutters are commonly needed there too.
Texas coast costs: windstorm inspections and engineers
For homes in Galveston, Corpus Christi, Port Aransas, South Padre Island, Rockport, Port Arthur and the rest of the TDI catastrophe area, budget for windstorm certification on top of the windows:
- TDI inspector: free. TDI inspectors do not charge an inspection fee and try to inspect within 48 hours of the requested date, excluding weekends and holidays. They must inspect during construction, so file Form WPI-1 before work starts.
- Private engineer: TDI-appointed qualified inspectors (licensed engineers) may also inspect ongoing work, and any Texas-licensed engineer can inspect completed work for a WPI-8-E certificate. TDI does not regulate engineers' rates and says post-construction inspections can be more invasive and more expensive.
- No certificate, higher premium. Under Texas Insurance Code 2210.259, noncompliant residential structures insured by TWIA pay a 15% annual surcharge (10% in some private-market nonrenewal cases). That surcharge can outweigh the cost of doing the certification right.
- Payment timing. TDI advises not to make final payment until the contractor finishes all work and the WPI-8 Certificate of Compliance is issued.
Houston, Dallas, San Antonio and Austin homes outside the catastrophe area do not need WPI-8 certification for windows. See TWIA windstorm certification for windows.
How much does a large impact sliding door cost?
Sliding glass doors are usually the most expensive single item on an impact quote because of their size, the glass weight and the engineering needed for wide openings. Today's Homeowner's 2025 guide lists sliding glass door units at about $2,800, but that is a single national figure and does not reflect multi-panel, pocket or high-DP doors, which cost several times more. Fixr's 2025 guide puts shutters for sliding doors at $12 to $60 per square foot for materials and installation, a useful comparison if you are deciding whether to replace a slider or shutter it.
Cost drivers specific to sliders: panel count and total width, the sill (high-performance sills that resist water cost more), the design pressure needed, glass type, and whether the opening must be resized. See impact sliding glass doors.
What does impact glass cost for a storefront?
Commercial storefront and window wall systems are priced per project, with engineering, shop drawings and special inspections. We found no reliable published per-square-foot storefront price. What we can show is the permit side in unincorporated Miami-Dade under the October 2026 fee schedule:
- Commercial window and door installation: $0.164 per square foot of window or door area
- Shop drawing review for storefront and fixed glazing: $92.34 for the first 400 square feet, plus $21.32 for each additional 100 square feet
- Minimum permit fee: $150.82
Storefront NOAs often say that a lower design pressure from any door or window in the system controls the whole system. If you own a building over three stories or 50 feet, add threshold inspection costs. See commercial building hurricane protection.
Offsetting the cost: My Safe Florida Home and insurance discounts
My Safe Florida Home (Florida grant)
The My Safe Florida Home (MSFH) program, run by the Florida Department of Financial Services under Florida Statutes 215.5586, offers free wind mitigation inspections and matching grants for improvements such as impact windows and doors, garage door reinforcement and roof upgrades. Key numbers:
- Match: $1 from the homeowner for every $2 from the state, up to $10,000 from the state. A homeowner paying the full match on a maximum grant pays $5,000 of a $15,000 project.
- Low-income applicants (as defined in s. 420.0004) can get up to $10,000 with no match.
- Eligibility includes a homesteaded, owner-occupied, site-built single-family home, insured value of $700,000 or less, built before January 1, 2008, and a program inspection within the prior 24 months. Chapter 2026-174 made the low- or moderate-income requirement permanent, so older articles saying the grant is open to all homeowners are out of date.
- All openings may be required. DFS may require improvements to all openings as a condition of reimbursement.
- Deadline: finish the work and request a final inspection within 18 months of grant approval.
- Contractor: the application must name a licensed contractor; the program verifies the license. MSFH recommends getting bids from at least three contractors.
Status, November 2026: the MSFH site says the applicant portal has been temporarily unavailable since November 10 while the program moves to a new platform. Grants depend on legislative appropriations. Check mysafeflhome.com before planning around a grant. Full details: My Safe Florida Home for windows and doors.
Insurance discounts
Florida Statutes 627.0629 requires insurers to offer actuarially reasonable discounts for opening protection, to show the hurricane portion of the premium separately, and since October 1, 2023, to describe their mitigation discounts on their websites. The discount applies to the hurricane (wind) part of your premium, not the whole bill, and it depends on the weakest opening. Ask your insurer or agent for the dollar difference between your current rating and Level A before you buy. In Texas, TWIA offers a discount for retrofitting exterior openings with debris-resistant products. See insurance discounts for impact windows and shutters.
Impact windows or shutters: which costs less?
Shutters almost always cost less up front. Fixr's 2025 guide puts whole-house shutters at $2,500 to $8,000 (about $5,200 average for accordion shutters on a 2,500 square foot single-story home with 18 to 22 windows and a slider), while its comparison figure for impact windows on a whole house is $3,500 to $10,500. Today's Homeowner's 2025 guide cites an average of $4,022 for shutters. Both shutters and impact windows can earn Level A on Florida's mitigation form if they are approved and properly documented, and TDI says installing both is not necessary.
The trade-off is labor and convenience. Shutters must be closed before every storm, and someone has to do it. Impact windows are always on, also block intruders and noise, and can lower cooling costs with Low-E glass. Many owners mix: impact units on hard-to-reach second-floor windows, shutters on the rest. See hurricane shutter costs and impact windows vs. hurricane shutters.
How long are quotes good, and do prices rise before hurricane season?
Hurricane season runs June 1 to November 30, with the peak from mid-August to late October, per the Florida Climate Center. Demand for installers and permits tends to build in spring and spikes after any storm. We found no published data measuring seasonal price changes, so treat claims of a "pre-season price increase" as a sales tactic until you see it in writing.
- Quote validity: there is no legal standard; it is whatever the quote says. Ask for the expiration date and whether the price is locked once you sign.
- Lead times: custom impact units are made to order. Ask for the expected manufacturing and installation dates in the contract.
- Pressure tactics: "sign today" discounts are a red flag. In Florida, a home solicitation sale (a sale made at your home) can be canceled until midnight of the third business day after signing, under Florida Statutes 501.025. See contracts and cancellation rights.
- Storm solicitation: Florida's storm-solicitation limits in 489.147 apply to roofing contracts, not windows. Use the general consumer protections and check licenses. See hurricane window scams.
How many quotes? At least three, as My Safe Florida Home recommends. Make sure each quote is for the same openings, the same DP, the same glass and the same scope of wall repair, or the comparison is meaningless.
Protect what you paid for: the paperwork that keeps its value
Impact windows only pay you back through insurance and resale if you can prove what was installed. Keep one folder, paper or digital, with:
- The signed contract and the final, itemized invoice
- The Florida approval or Miami-Dade NOA for every product, including the approval drawings
- The permit and the passed final inspection (and in Texas, the WPI-8 or WPI-8-E certificate, which TDI cannot rescind once issued under Insurance Code 2210.2515(k))
- Photos of each window's label or etching taken before labels are removed
- The new wind mitigation form; Citizens says these forms are usually valid for up to five years
Citizens Property Insurance tells policyholders who add mitigation features to have their agent submit documentation and photos, such as NOA letters, and notes a new inspection may be required before new discounts apply. If you sell, the same folder answers a buyer's inspector and insurer. See home value and impact windows.
Quote comparison checklist
| Line item | What to look for |
|---|---|
| Contractor license | Florida license number (verify at myfloridalicense.com); in Texas, ask about local registration and TDI inspection plans |
| Product and approval | Series name and Florida approval or Miami-Dade NOA number for every product; HVHZ approval in Miami-Dade and Broward |
| Opening schedule | Every opening listed with size, style and location |
| Design pressure | Required and rated positive and negative DP for each opening |
| Missile rating | Large missile for openings up to 30 ft |
| Glass | Laminated or insulated laminated, Low-E, tint, obscure where needed |
| Frame and color | Material, color, grids, screens |
| Installation method | Anchors and buck details per the approval |
| Removal and disposal | Included or not |
| Stucco, drywall, paint | Included, excluded, or allowance; full-wall paint or touch-up |
| Buck repair | Unit price for rotted bucks found during removal |
| Permit and inspections | Who pulls the permit; fee included; final inspection before final payment |
| Engineering | Included where required (condos, resized openings, threshold buildings) |
| Texas windstorm | WPI-1 filed before work; who inspects; WPI-8 before final payment |
| Schedule | Order, delivery and installation dates |
| Payment schedule | Deposit size; final payment after final inspection |
| Warranty | Product warranty and installer labor warranty, in writing |
| Paperwork | Copies of NOAs or approvals, permit and final inspection for your records |
More: choosing a contractor and comparing quotes.
How to choose a provider
- List and measure every opening, including doors, transoms and sidelights.
- Find your required design pressures (ask the installer or your building department) before comparing products.
- Get at least three itemized quotes for the same openings, DP, glass and wall-repair scope.
- Check every product's Florida approval or NOA number yourself.
- Ask whether stucco, drywall, paint and buck repair are included.
- Look up your city or county permit fee so you can judge the permit line.
- In Texas, confirm the WPI-1 is filed before work starts and plan for a TDI or engineer inspection.
- In Florida, check My Safe Florida Home status and eligibility before signing.
- Ask your insurer what discount you would get at Level A, in dollars.
- Do not make final payment until the final inspection (and WPI-8 in Texas) is done.
- Keep approvals, permits and inspection records for insurance and resale.
Related hurricane shutters and impact windows guides
- How Much Do Hurricane Shutters Cost? Prices by Type for Panels, Accordion, Roll-Down, Fabric and Bahama
- Impact Sliding Glass Doors: Why Do They Leak in Hurricanes, What Design Pressure Do You Need, and What Do They Cost?
- Impact Windows vs. Hurricane Shutters: Which Protection Is Right for Your Home or Business?
- Does My Safe Florida Home Pay for Impact Windows and Doors? 2026 Eligibility, Match and Status
- Insurance Discounts for Impact Windows and Shutters in Florida and Texas: How They Work and How to Claim Them
- How Do You Compare Impact Window and Shutter Quotes? 20 Questions to Ask Before You Sign
- Do You Need a Permit for Impact Windows, Doors and Shutters in Florida? Process, Documents, Fees and Inspections
- What Is the HVHZ? Hurricane Protection Rules in Miami-Dade and Broward vs. the Rest of Florida
Hurricane shutters and impact windows by state and city
Questions people ask
How much does one impact window cost?
National cost guides put a typical impact window at about $1,500 to $2,800 installed (Today's Homeowner, September 2025), while some list per-window ranges from about $100 to $2,100 depending on style and options (Bob Vila, 2023). Small standard units cost less; large, custom, high-pressure or HVHZ units cost more. Your price depends on size, design pressure, glass, frame, floor and wall repairs, so get itemized quotes.
What is the cost per square foot for impact windows?
Two national guides cite $55 to $62 per square foot for high-impact windows. To compare quotes on that basis, total the rough opening area of all windows on each quote and divide the price by it. Small windows cost more per square foot than large ones. A much higher number is a reason to ask what the quote includes, such as permits, stucco repair or HVHZ products.
Are impact windows worth the cost compared with shutters?
It depends on who will put up shutters and how long you will stay. Shutters cost less up front (Fixr's 2025 whole-house range is $2,500 to $8,000) and earn the same Level A mitigation rating if approved and documented. Impact windows protect without any work before a storm, add security and sound control, and can cut solar heat gain. Many owners combine both.
Will impact windows lower my insurance enough to pay for themselves?
No one can promise that. Florida law requires insurers to offer discounts for opening protection, applied to the hurricane portion of the premium, but the amount varies by insurer, location and your home's other features. Ask your insurer for the dollar difference between your current rating and Level A, then compare it with your quotes over the years you expect to own the home.
Does My Safe Florida Home pay for impact windows?
It can. Florida Statutes 215.5586 lets grants cover opening protection, including windows, exterior doors, garage doors and skylights, when the program's inspection recommends them. The state pays $2 for every $1 from the homeowner, up to $10,000, with no match for low-income applicants. Income limits now continue under ch. 2026-174. The applicant portal has been offline since November 10, 2026, so check the program website for status.
Do I need a permit to replace windows with impact windows?
In most Florida jurisdictions, yes. Miami-Dade requires a permit with the product approval for each unit and charges $150.82 for a single-family window installation permit under its October 2026 schedule. In the Texas catastrophe area, replacement windows need a windstorm inspection and WPI-8 for TWIA eligibility, and local permits may also apply. Ask your city or county.
Why is one quote twice as much as another?
Usually the quotes are not for the same thing. Compare design pressure, missile rating, HVHZ approval, glass type (laminated vs. insulated laminated, Low-E), frame and color, and whether stucco, drywall, paint, buck repair, permits and engineering are included. Also check license status and whether the cheaper quote names an approved product for every opening.
Can I replace just the broken glass in an impact window?
Sometimes. The replacement glass must match the glass type and thickness listed in the window's product approval, or the unit no longer matches its rating and may be marked unverified or damaged on a wind mitigation inspection. Ask the manufacturer or an authorized dealer for an approved glass replacement. In Texas, TDI lists replacing glass in windows or doors among projects that do not need a windstorm inspection.
Do installers charge for an estimate?
Practices vary and we found no rule on it. Many installers give free in-home estimates, which is also when high-pressure sales happen. Ask for a written, itemized quote you can take time to compare. If you sign at home in Florida, you generally have until midnight of the third business day to cancel a home solicitation sale under Florida Statutes 501.025.
Do impact windows cost more on the second floor or in a condo?
Generally yes. Upper-floor openings take longer to install and often need higher design pressures. Condo high-rises add association approval, engineering, and, since January 2026, threshold inspections by a state-certified Special Inspector for buildings over three stories or 50 feet. In the HVHZ, glazing above 30 feet must still pass the small missile test.
Sources
- Today's Homeowner: How Much Do Hurricane Windows Cost? (updated Sept. 3, 2025)
- Bob Vila: Hurricane Windows Cost (last modified June 9, 2023)
- Fixr: Hurricane Shutters Cost (updated Jan. 31, 2025)
- Miami-Dade County Implementing Order 4-63, RER Building Fee Schedule (effective Oct. 1, 2026)
- Miami-Dade County: Windows, Shutters, Doors and Security Bars
- Miami-Dade County: Product Approval
- U.S. Bureau of Labor Statistics, OEWS May 2025 (glaziers, state and metro), via BLS API
- Florida Statutes 215.5586, My Safe Florida Home Program
- Laws of Florida ch. 2026-174 (CS/CS/CS/SB 1452)
- My Safe Florida Home
- Florida Statutes 627.0629, Residential property insurance; rate filings
- Florida OIR Form OIR-B1-1802, Rev. 04/26
- Florida Building Code, Building, 8th Ed. (2023), Chapter 1 (UpCodes)
- Florida Building Code, Building, 8th Ed. (2023), Chapter 16 (UpCodes)
- Florida Building Code, Existing Building, 8th Ed. (2023), Chapter 7 (UpCodes)
- Florida Building Code, Existing Building, 8th Ed. (2023), Chapter 5 (UpCodes)
- City of Tampa: Shutters and Awnings permits
- City of Tampa: Post-Hurricane Permitting Guide (April 2026)
- Florida Administrative Code 61G4-15.015, Specialty Structure Contractor
- Florida Statutes 489.127, Prohibitions; penalties
- Texas Department of Insurance: Do you need a windstorm inspection?
- Citizens Property Insurance: Updating Mitigation Features
- Citizens Property Insurance: Wind Inspection Results
- Florida Climate Center (FSU): Hurricanes
- Florida Statutes 501.025, Home solicitation sale; buyer's right to cancel
- Texas Department of Insurance: Windstorm inspection process
- Texas Department of Insurance: Making repairs after a storm
- Texas Department of Insurance: Adopted Building Codes
- Texas Department of Insurance: Protecting openings FAQ
- Texas Insurance Code Chapter 2210
- Texas Department of Insurance: Windstorm general questions
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


