New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Thu, Nov 19, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · General and residential contractors

Custom Home Building Costs in Texas and Florida: What Goes Into the Price Per Square Foot

Census and NAHB data on what custom homes cost per square foot in the South, where every dollar goes, and the Texas and Florida costs (impact fees, utility districts, clay foundations, wind and flood code) that change the total.

In 2025, contractor-built custom homes on owners' land in the Census South region, which includes Texas and Florida, had a median contract price of $157.30 per square foot and an average of $179.96, not counting the lot. NAHB's 2024 national survey put builders' construction cost at about $162 per square foot. Land, site work, impact fees, foundations and Florida wind and flood rules move your total.

Key facts

  • Census: 2025 median contract price for contractor-built homes in the South was $157.30 per sq ft (average $179.96), lot excluded.
  • Census: 2025 median contract price in the South was $388,100 (average $558,400); U.S. median $404,000.
  • Census: the South's 2025 median sale price per sq ft of new homes sold was $144.89, lot excluded.
  • NAHB 2024: average construction cost $428,215, about $162 per sq ft, a record (national).
  • NAHB 2024: construction was 64.4% of sales price, finished lot 13.7%, profit 11.0%.
  • NAHB 2024: permit fees averaged $7,640 and impact fees $6,367 per home (national).
  • Florida's Impact Fee Act caps most increases at 50% and once every 4 years, with phase-ins (s. 163.31801).
  • Texas city impact fees cover only water, wastewater, drainage and roadway improvements (LGC ch. 395).
  • Census: in 2025, the median contractor-built home in the South had 2,482 sq ft of floor area, 66% were one story, 46% used septic systems and the median lot was 36,436 sq ft (about 0.84 acre).
  • Since July 1, 2026, Florida must permit offsite-constructed homes as of right where comparable homes are allowed (Ch. 2026-63).

The short answer: what a custom home costs in Texas and Florida

The best neutral, current number for a custom home built on land you already own comes from the U.S. Census Bureau's Survey of Construction. It tracks contractor-built houses: homes built by a general contractor on the owner's land, which is what most people mean by "custom." Census reports by region, and both Texas and Florida are in the South region.

2025 contractor-built single-family homes started (lot excluded)South region (includes TX and FL)United States
Median contract price per square foot$157.30$171.57
Average contract price per square foot$179.96$198.33
Median contract price$388,100$404,000
Average contract price$558,400$576,500
Homes started (thousands)64131

The contract price is what owners paid the contractor to build the house. It excludes the value of the lot. The median is the middle home, so half cost less per square foot and half cost more. The average is pulled up by expensive homes, which is why it is higher.

A second neutral source, NAHB's 2024 Cost of Constructing a Home survey, found builders' average construction cost for a typical new home was $428,215, or about $162 per square foot nationally, the highest in the survey's history. That survey is national only; NAHB says its sample is too small for state or regional breakdowns.

Nobody publishes a free, neutral, current cost per square foot for Houston, Dallas, San Antonio, Austin, Miami, Tampa, Orlando or Jacksonville specifically. Builder websites that quote city ranges usually do not show their data. So use the regional figures above as a reality check, and get detailed bids for your plan and lot. See the custom home building process.

Three different "per square foot" numbers, and why they disagree

When someone tells you what it "costs per square foot" to build, ask which of these they mean:

NumberWhat it measures2025 South region (lot excluded)
Sale price per sq ft of new homes soldSpec and tract homes sold by builders, mostly in subdivisionsMedian $144.89, average $155.62
Contract price per sq ft of contractor-built homesHomes built under contract on the owner's landMedian $157.30, average $179.96
Builder construction cost per sq ft (NAHB, 2024, national)What builders spent on construction only, before overhead and profitAbout $162 (national)

Two lessons. First, a custom home typically costs more per square foot than a production home of the same size, because a production builder spreads design, purchasing and crews across many identical houses. In 2025 the South's median contract price per square foot for owner-land homes was about $12 higher than the median sale price per square foot of new homes sold. Second, quotes that include the lot, site work, design and fees are not comparable to quotes that do not. Always ask what is in and out.

Census excludes the lot in both of its measures. NAHB's construction cost includes site work, permit and impact fees, but not the lot itself, the builder's overhead, sales costs or profit.

How much costs have risen

NAHB's survey shows average construction cost per square foot (not adjusted for inflation) of $80 in 2011, $95 in 2013, $103 in 2015, $86 in 2017, $114 in 2019, $153 in 2022 and $162 in 2024. NAHB attributed the 2022 jump mostly to building materials and the more recent increase to construction labor shortages and elevated wage growth, with material prices "relatively well-behaved" since.

Census data for the South tell the same story for custom homes. The share of contractor-built homes started at a contract price of $150 or more per square foot climbed steeply:

YearSouth: share at $150+/sq ftU.S.: share at $150+/sq ft
201915%26%
202021%32%
202123%38%
202242%54%
202347%58%
202448%58%
202554%61%

The South's median contract price per square foot rose from $145.01 in 2023 to $146.04 in 2024 and $157.30 in 2025. Census publishes relative standard errors for these figures (9% for the 2025 South median), so treat year-to-year moves as approximate.

What custom homes in the South actually look like

Census's Survey of Construction also describes the homes. Comparing contractor-built homes (on the owner's land) with all new single-family homes completed in the South in 2025 shows how custom homes differ, and why they cost what they do.

2025, South regionContractor-builtAll new single-family
Median floor area2,482 sq ft2,162 sq ft
Average floor area2,865 sq ft2,396 sq ft
4,000 sq ft or more17%7%
One story66%51%
Slab foundation (or other slab types)75%88%
Crawl space19%8%
Concrete framing (block or poured)11%9%
Exterior wall: stucco / fiber cement / vinyl / brick30% / 23% / 22% / 19%23% / 24% / 21% / 26%
Individual septic system46%18%
Lot of 22,000 sq ft (about half an acre) or more56%17%
Median lot size36,436 sq ft (about 0.84 acre)Not compared here
Modular construction4%1%

What that means for cost

  • Bigger houses. The typical Southern custom home is about 300 square feet larger than the typical new home, and one in six is 4,000 square feet or more. Total cost scales with size even when per-square-foot cost falls slightly on very large homes.
  • More one-story homes. Two-thirds are single-story. A one-story plan of the same area needs more foundation and roof than a two-story plan, two of the costlier stages in NAHB's breakdown.
  • Bigger, more rural lots. Nearly half of Southern custom homes use septic systems and more than half sit on lots of half an acre or more. That shifts money into site work: wells, septic, driveways, clearing and utility runs that a subdivision lot does not need.
  • More stucco and concrete. Stucco exteriors and concrete framing show up more often in custom homes, which fits Florida's block-and-stucco building tradition.

Census reports these as regional figures. Texas and Florida share the South region with 14 other states and D.C., so local patterns will differ: block-and-stucco walls are typical in much of Florida, while brick and fiber cement over wood framing are common in Texas suburbs.

Where the money goes: the construction cost breakdown

NAHB's 2024 survey asked builders to split the cost of a typical 2,647-square-foot home into 36 line items. The averages below are national and reflect 41 usable builder responses, so use the shares more than the dollar amounts.

Stage and item (2024, national)AverageShare of construction cost
Site work$32,7197.6%
Building permit fees$7,6401.8%
Impact fee$6,3671.5%
Water and sewer fees, inspections$6,2601.5%
Architecture, engineering$6,4801.5%
Other site work$5,9721.4%
Foundations$44,74810.5%
Excavation, foundation, concrete, retaining walls, backfill$43,00210.0%
Other$1,7470.4%
Framing$70,98216.6%
Framing (including roof)$49,76311.6%
Trusses$12,9033.0%
Sheathing$6,5131.5%
General metal, steel$1,7180.4%
Exterior finishes$57,51013.4%
Exterior wall finish$24,4505.7%
Roofing$16,7323.9%
Windows and doors (including garage door)$15,9903.7%
Major systems rough-ins$82,31919.2%
Plumbing (except fixtures)$27,1806.3%
Electrical (except fixtures)$27,3836.4%
HVAC$26,9386.3%
Interior finishes$103,39124.1%
Insulation$6,9921.6%
Drywall$13,9623.3%
Interior trim, doors, mirrors$12,9203.0%
Painting$11,1502.6%
Lighting$5,3921.3%
Cabinets, countertops$19,0564.5%
Appliances$7,4991.8%
Flooring$15,3883.6%
Plumbing fixtures$7,9221.9%
Fireplace$2,3780.6%
Final steps$27,7106.5%
Landscaping$9,2692.2%
Outdoor structures (deck, patio, porches)$4,7221.1%
Driveway$9,6352.3%
Clean up$3,1830.7%
Other$8,8352.1%
Total construction cost$428,215100%

Some line items are omitted from this table when they were near zero; totals reflect NAHB's published figures. Interior finishes are the largest stage and the one you control most through your selections. Major systems (plumbing, electrical, HVAC) have grown as a share, from 13.4% in 2013 to 19.2% in 2024, while framing fell to 16.6%, its lowest share since NAHB began measuring stages in 2013.

What share of a home's price is construction cost?

NAHB also asked builders to split the sales price of a typical new home. In 2024 the average sales price in its sample was $665,298:

Component (2024, national)AverageShare of sales price
Construction cost$428,21564.4%
Finished lot$91,05713.7%
Builder profit (before taxes)$72,97111.0%
Overhead and general expenses$38,2485.7%
Sales commission$18,9552.8%
Builder's interest and carrying costs$10,2201.5%
Marketing$5,6330.8%

Construction's 64.4% share was a record. It has ranged from 48.1% (2007) to 64.4% (2024) since 1998, while the lot's share fell from a high of 26.0% (2004) to 13.7%. Profit's long-run average is 9.8%.

NAHB cautions that its sample, which gives extra weight to smaller builders, is not designed to estimate the average U.S. home price; its $665,298 average was about $150,000 above Census's latest average at the time. For a custom home on your own lot, you will not pay a lot cost, sales commission or marketing to the builder, but you will pay the builder's overhead and profit inside the contract price, plus your own design, lot and carrying costs.

Land vs house: how much does the lot cost?

In NAHB's 2024 survey, the finished lot averaged $91,057, 13.7% of the sales price, on an average lot of 20,907 square feet (a little under half an acre). That is for builders' finished lots with utilities and streets in place. Raw land is a different purchase:

  • Raw acreage may be cheaper per acre but can need a road or driveway, utility extensions, a well and septic system, clearing and drainage work.
  • A lot in a subdivision usually has utilities at the street but comes with deed restrictions, an HOA and architectural review.
  • An infill lot in an older neighborhood may need demolition, tree protection and careful drainage design.

Before you buy land

  1. Get a survey and title commitment, and read every restriction.
  2. Confirm zoning and minimum house size rules.
  3. Check flood zone status and the base flood elevation.
  4. Ask the utility what it will cost to connect water, sewer and power, and whether capacity exists.
  5. Order a geotechnical (soils) report if the seller does not have one.
  6. In Texas, find out whether the land is in a municipal utility district or similar district. Sellers of property in many such districts must give buyers a written notice (Water Code 49.452), which tells you the district's tax rate and bonds.

See buying land to build a house and, for rural Texas builds, the Texas barndominium guide.

Site work and soft costs

Soft costs are the non-construction costs of getting a house built: design, engineering, surveys, permits, impact and utility fees, inspections, insurance during construction and your own carrying costs. Site work covers clearing, grading, utility trenching and driveway rough-in. In NAHB's 2024 survey, the site work stage (which includes permit, impact, water and sewer fees and architecture and engineering) averaged $32,719, or 7.6% of construction cost. Driveways ($9,635) and landscaping ($9,269) sat in the final-steps stage.

Soft cost checklist for a custom home

ItemWho usually paysNotes
Boundary and topographic surveyOwnerNeeded for the site plan
Soils (geotechnical) reportOwnerDrives foundation design, especially on Texas clay
Architect or designerOwner or design-builderSee design-build vs architect
Structural engineerOwner or builderFoundation, framing, wind design
Building permit and plan reviewBuilder, passed throughSet locally; NAHB national average $7,640 (2024)
Impact feesBuilder, passed throughSet by county, city, school or special district
Water, sewer, power connectionsBuilder or ownerUtility tap and meter fees
Well and septic (rural)OwnerPermits from local health or environmental agency
Builder's risk insuranceDecide in contractCovers the house during construction
HOA review fees and depositsOwnerCheck the declaration

In Florida, local governments may not require your builder contract or a cost breakdown to issue a permit, and may not base inspection fees on total project cost (553.79). Florida also lets owners or contractors use a private provider for plan review and inspections, and the local fee must be reduced by the savings (553.791).

Impact fees in Florida

An impact fee is a one-time charge on new development to help pay for the public facilities it will use, such as roads, schools, parks, fire and police. Florida counties, cities and some special districts charge them, and amounts vary widely by county and sometimes by home size and zone.

What Florida law requires

Florida's Impact Fee Act (s. 163.31801) limits how local governments set and raise these fees:

  • Fees must be based on a demonstrated-need study using recent, localized data, and must be proportional to the development's impact.
  • New or increased fees require at least 90 days' notice, and an increase generally may not apply to permit applications already submitted.
  • Collection may not be required earlier than issuance of the building permit.
  • Increases of up to 25% must be phased in over two equal annual steps, increases between 25% and 50% over four steps, and increases may not exceed 50% or occur more than once every 4 years, unless the government documents extraordinary circumstances through a study and other requirements.

Finding your number

Because each jurisdiction sets its own schedule, the only accurate number is your county's (and city's) current schedule for your lot. Hillsborough County, for example, lists school, park and fire impact fees plus a separate mobility fee for residential development, with a calculator and zone maps on its permit-fees page. Ask the building department for the fee estimate before you sign a land contract. For comparison, NAHB's 2024 national survey averaged impact fees at $6,367, or 1.5% of construction cost, but Florida's fast-growing counties can be far from that national average.

Impact fees, utility districts and other Texas costs

Texas cities may charge impact fees under Local Government Code chapter 395, but only for specific capital improvements: water supply, treatment and distribution; wastewater collection and treatment; storm water, drainage and flood control; and roadway facilities. The fee may only pay for construction, surveying and engineering, land acquisition and certain consultant costs tied to a capital improvements plan.

Municipal utility districts (MUDs)

Much new development around Houston, Austin and Dallas is served by special districts that build water, sewer and drainage with bonds repaid through district property taxes. That cost does not show up in the construction contract but does show up in your annual tax bill. Texas requires sellers of property in many such districts to give buyers a written notice before the sale (Water Code 49.452). Read it before you buy a lot.

Building outside city limits

Rural Texas builds can avoid some city fees, but add costs for wells, septic systems, longer driveways, power line extensions and, in some counties, limited building inspection. If no one inspects the house, consider paying for independent inspections at the foundation, framing, rough-in and final stages. See Texas permits and building inspections.

Texas permit timelines

If a Texas city or county misses its review or inspection deadline by 15 days, Local Government Code ch. 247 lets a qualified third party do the review or inspection, and the authority may not charge for it or require you to waive the deadlines.

Foundations on Texas clay

Foundations were 10.5% of construction cost ($44,748) in NAHB's 2024 national survey, with excavation, foundation, concrete, retaining walls and backfill alone at 10.0%. We found no neutral, current Texas-specific foundation cost survey, so here is what moves the number.

  • Soil type. Much of Central, North and Southeast Texas sits on expansive clay that swells when wet and shrinks when dry. A geotechnical report measures that movement and recommends a foundation design.
  • Slab design. Engineered slabs, often post-tensioned (steel tendons tightened after the concrete cures) or with deeper grade beams, are common on clay. Piers add cost where soils are poor or fills are deep.
  • Grading and drainage. Water management around the slab protects the investment. Budget for gutters, grading and landscaping that keep water moving away.
  • Sloped lots. Hill Country lots near Austin and San Antonio can need retaining walls, rock excavation or stepped foundations.

Texas does not legally require an engineer to design a private dwelling's foundation (Occupations Code 1001.056), but many cities and most careful builders use an engineer's sealed design on clay soils. Ask your building official and get the soils report before you price the house.

How much does hurricane and flood code add in Florida?

We could not find a neutral, current, published study isolating the cost of Florida's wind and flood requirements for a new single-family home. Builder estimates exist but rarely show their data. What we can tell you is where the extra cost comes from, so you can ask bidders to price it.

Wind

  • Impact-resistant windows and doors, or approved shutters, where required.
  • Roof-to-wall and wall-to-foundation connections (straps, anchors, hold-downs) sized to the design wind speed.
  • Roof covering, underlayment and sheathing fastening rated for the wind zone, and product approvals for exterior components. South Florida applies the Florida Building Code's strictest wind provisions.
  • Concrete block exterior walls, common in Florida, change framing and finish costs compared with wood-framed walls.

Flood

  • In mapped flood zones, the lowest floor must meet the local elevation requirement, which can mean fill, stem walls or pilings.
  • Materials below the flood elevation must be flood-resistant, and equipment must be elevated.
  • Under federal flood rules, later work on a building in a flood zone that equals or exceeds 50% of its market value is a substantial improvement and must meet current floodplain standards (44 CFR 59.1).

Off-site construction is now permitted as of right

Since July 1, 2026, Florida requires local governments to permit offsite-constructed residential dwellings as of right in zoning districts where comparable homes are allowed (new s. 553.385, Ch. 2026-63). Modular and factory-built homes that meet the Florida Building Code can be a way to manage cost and schedule, but foundations, site work, transport and set costs still apply.

Materials and structure: what changes the price

Per-square-foot costs move most with a handful of structural and envelope choices. There is no neutral, current source that prices each option for Texas and Florida, so use this as a list of questions for bidders rather than a price list.

ChoiceOptionsCost questions to ask
Wall structureWood frame; concrete block; insulated concrete forms; steel frameHow does each affect wind design, insulation and finish costs on this plan?
Exterior claddingStucco, fiber cement, brick, stone, vinyl, metalInstalled cost per square foot of wall, and maintenance over 20 years
RoofAsphalt shingle, metal, concrete or clay tileWind rating, structure needed for heavy tile, insurance effects
FoundationSlab on grade, post-tensioned slab, piers, crawl space, elevated on pilingsWhat does the soils report or flood elevation require?
Windows and doorsStandard, impact-rated, with shuttersRequired rating for the wind zone and product approvals
HVACSingle system, zoned, multiple systems, heat pumpsLoad calculation, duct location, humidity control

In NAHB's 2024 national breakdown, exterior finishes (wall finish, roofing, windows and doors) were 13.4% of construction cost and framing 16.6%. Those are the stages most affected by Florida wind requirements and by heavy cladding choices like brick or stone.

Metal buildings and barndominiums

Steel-framed shell buildings finished as homes are popular in rural Texas. The shell can be fast to erect, but interior finishes, insulation, HVAC, plumbing and electrical cost about the same as in any house, and those stages were more than 43% of NAHB's 2024 construction cost. Insurers, appraisers and counties may treat these homes differently, so check before you commit. See the Texas barndominium guide.

One story or two?

Two-thirds of Southern custom homes completed in 2025 were one story, compared with about half of all new homes. Owners choose single-story for aging in place, large lots and Florida's long tradition of single-level block homes. The cost tradeoff:

  • One story: more foundation and more roof per square foot of living space; simpler framing, no stairs, easier construction access and less scaffolding.
  • Two story: less foundation and roof per square foot; adds stairs, floor framing, more complex HVAC zoning and taller wall exposure to wind.

On expensive foundations (piers on poor soils, elevated homes in Florida flood zones) and expensive roofs (tile, wind-rated metal), a two-story plan can save money. On cheap, flat lots with simple slabs, the difference narrows. Ask your builder to price the same plan both ways if you are undecided. For a single-story home designed to work for you later in life, see aging-in-place design.

Rural lots: wells, septic, power and driveways

In 2025, 46% of contractor-built homes in the South used an individual septic system, and 22% had both septic and an individual water supply such as a well, according to Census. Those systems are part of what you pay for when you build on acreage.

  • Septic systems need a site evaluation (soil and percolation testing), a design and a permit from the local agency that handles onsite sewage. Poor soils or a high water table can require engineered systems that cost more than a conventional one.
  • Wells need a licensed driller, a pump, a pressure tank and water testing. Depth and water quality drive cost.
  • Power may need a line extension. Ask the electric utility for a written estimate before closing on land.
  • Driveways averaged $9,635 in NAHB's 2024 survey of mostly suburban homes; a long rural drive with culverts can be far more.
  • Clearing and drainage on wooded or low-lying land can be a major line item.

Get these costs before you buy the land, not after. See buying land to build a house.

Setting realistic allowances

Custom home contracts usually include allowances, budget amounts for items you have not chosen yet. If you choose something more expensive, you pay the difference. Low allowances make a bid look cheaper and come back as change orders. NAHB's 2024 national averages for a typical 2,647-square-foot home give a sense of scale:

Allowance itemNAHB 2024 national average
Cabinets and countertops$19,056
Flooring$15,388
Plumbing fixtures$7,922
Appliances$7,499
Lighting$5,392
Landscaping$9,269

Those are averages for production and semi-custom homes. Custom owners often choose higher-end items. Before signing, visit showrooms, price your real choices, and make the contract's allowances match. Ask whether allowances include installation and the builder's markup, and how unused allowance money is credited back to you.

Comparing builders' price-per-square-foot quotes

Two builders can quote $200 and $250 per square foot for the same house and both be honest. Before comparing, ask:

  1. Which square feet? Conditioned (heated and cooled) living area only, or total area under roof including the garage, porches and patios? A quote per square foot under roof looks lower than the same price per conditioned square foot.
  2. What is excluded? Site work, utility connections, driveway, landscaping, impact fees, design and engineering, appliances and window coverings are commonly left out.
  3. What allowances are assumed? Get them in dollars.
  4. Which foundation? A quote that assumes a simple slab will change after the soils report.
  5. Which windows and doors? In Florida, confirm impact ratings and approvals are included.
  6. How long is the price good? And is there an escalation clause for materials?

The only fair comparison is two complete bids for the same plans and specifications, leveled line by line. See how to compare contractor bids.

Texas vs Florida: custom home cost factors side by side

FactorTexasFlorida
Who can buildNo state GC license; city registration may apply; trades need state licensesLicensed general, building or residential contractor (ch. 489), or owner-builder under 489.103(7)
Design professionalsNo architect required for single- or dual-family dwellings (1051.606); engineering exemption for private dwellings except windstorm certification work (1001.056)No architect required for one- or two-family homes (481.229); engineering commonly needed for wind and flood design
Main soil or site issueExpansive clay in much of the state; Hill Country rock and slopesFlood elevation, high water tables, coastal wind exposure
Impact feesCity fees limited to water, wastewater, drainage and roadway (LGC ch. 395)County, city, school and district fees under the Impact Fee Act (163.31801)
Utility districtsMUDs common around Houston, Austin and Dallas; seller notice required (Water Code 49.452)Varies; ask the county and utility
Permit timing protectionsThird-party review or inspection if the authority misses its deadline by 15 days (LGC ch. 247)Review deadlines with fee reductions (553.792); private providers allowed (553.791)
Contract notices53.255 disclosure; homestead contract formalities; RCLA noticeRecovery Fund notice (489.1425); lien-law notice (713.015)
Payment protections10% retainage for 30 days; trust funds (ch. 162); bills-paid affidavitNotice of Commencement; releases from Notice to Owner lienors; final payment affidavit; 489.126 deposit rules
Factory-built homesLocal zoning rules applyOffsite-constructed homes permitted as of right where comparable homes are allowed (since July 1, 2026)

From lot to move-in: the cost checkpoints

Each phase of a custom build has a moment when you can still change the budget cheaply. After it passes, changes get expensive.

  1. Before buying land: survey, soils, flood zone, utilities, restrictions, district taxes. This is the cheapest time to walk away.
  2. Programming and schematic design: size, stories and shape are set here, and they drive most of the cost.
  3. Design development: structure, windows, roof, HVAC approach. Get a preliminary builder estimate now.
  4. Construction documents and bids: finalize allowances and specifications. Level the bids.
  5. Permits and fees: confirm impact and utility fees in writing.
  6. Contract signing: lock pricing method, allowances, change-order pricing, draws and notices.
  7. Foundation through dry-in: changes here affect structure; avoid them.
  8. Rough-ins: last chance for outlet, lighting, plumbing and low-voltage changes at reasonable cost.
  9. Finishes: selections should already be made; late choices delay the job.
  10. Closeout: punch list, final inspection, final affidavit and lien releases before the last payment.

A worked example: budgeting a 2,500-square-foot custom home in the South

This is an illustration built from published averages, not a quote. Start with the Census 2025 South median contract price of $157.30 per square foot (lot excluded) for a 2,500-square-foot home: about $393,250. If you split that figure using NAHB's 2024 construction stage shares, you get a rough picture of where the money goes. (The Census contract price includes the builder's overhead and profit, which NAHB's construction cost does not, so the split is approximate.)

StageNAHB 2024 shareOf $393,250
Site work (permits, fees, design, other)7.6%$29,887
Foundations10.5%$41,291
Framing16.6%$65,280
Exterior finishes13.4%$52,696
Major systems rough-ins19.2%$75,504
Interior finishes24.1%$94,773
Final steps (landscape, driveway, cleanup)6.5%$25,561
Other2.1%$8,258
Total100%$393,250

Then add what the contract price leaves out

  • The lot, closing costs and any demolition of an existing structure.
  • Owner-paid design, surveys and soils reports if not in the builder's contract.
  • Utility extensions, well and septic on rural land.
  • Impact fees if your contract passes them through separately.
  • Window coverings, furniture, moving and temporary housing.
  • A contingency for changes and unknowns.

If your plan is complex (many corners, tall ceilings, a second story, large windows) or your finishes are high-end, expect to land well above the median. The South's 2025 average ($179.96 per square foot) is a reminder of how far the upper half stretches.

Is it cheaper to build or buy?

Usually, buying an existing or newly built production home costs less per square foot than building custom, because production builders gain efficiency from repetition and bulk buying. In 2025, Census put the South's median sale price per square foot of new homes sold at $144.89 (lot excluded) versus $157.30 for contractor-built homes on owners' land.

FactorBuy (existing or spec)Build custom
Price per sq ftOften lowerOften higher
TimeWeeks to closeMany months for design, permits and construction
Price certaintyKnown at contractDepends on contract type and changes
Fit to your needsCompromiseDesigned around you
LocationLimited to what is for saleAny lot you can buy
Hidden conditionExisting homes may need repairsNew systems and current codes

Building can make financial sense when you already own the land, when nothing for sale fits your needs or location, or when you plan to stay long enough to value the fit. It rarely makes sense as a pure money-saver. If you do buy new from a builder in Texas, the seller of a newly built home of up to four units intended as your principal residence must give you a bills-paid affidavit at closing (Property Code ch. 53).

How to keep custom home costs down

  1. Size. Every square foot costs money. Rooms you rarely use are the cheapest to cut.
  2. Simple shape. Rectangles with fewer corners, a simple roof and stacked plumbing reduce framing, roofing and labor.
  3. Ceiling heights and windows. Tall ceilings and walls of glass add framing, drywall, HVAC and, in Florida, impact-rated glazing cost.
  4. Stock or adapted plans. A proven plan adjusted for your lot costs less to design and engineer than a blank sheet.
  5. Realistic allowances. Set cabinet, counter, flooring, lighting and plumbing fixture allowances from real showroom prices before you sign. Interior finishes were 24.1% of NAHB's 2024 construction cost, so this is where budgets drift.
  6. Decide early. Changes during construction cost more than changes on paper.
  7. Consider factory-built options. Florida now permits offsite-constructed homes as of right where comparable homes are allowed.
  8. Owner-builder, carefully. Acting as your own contractor can save the GC's markup but transfers scheduling, safety and legal responsibilities to you. See Florida owner-builder permits and the Texas owner-builder guide.

Contracts and payment for a custom home

Pricing structures

  • Fixed price: one price for the plans and specifications, with allowances for unselected items. You pay for changes.
  • Cost-plus a fee: you pay actual costs plus a percentage or fixed fee, with open books. Good when the design is still evolving; requires trust and auditing.
  • Cost-plus with a guaranteed maximum price: a ceiling on cost-plus.

See fixed price vs cost-plus and how to compare bids.

Texas rules

  • The builder must give you the Property Code 53.255 disclosure before you sign a residential construction contract.
  • If the house will be your homestead, the contract must be in writing and signed before work starts, filed with the county clerk, and signed by both spouses if married, for a lien to be valid.
  • Keep 10% retainage until 30 days after completion, get the subcontractor list, and collect statutory lien waivers.
  • Contract payments are construction trust funds under Property Code ch. 162.

Florida rules

  • Hire a licensed general, building or residential contractor whose license class fits the house.
  • Expect the Recovery Fund notice (489.1425) and the lien-law notice (713.015) in the contract.
  • Record a Notice of Commencement before work and get releases from every lienor who serves a Notice to Owner.
  • If the builder takes more than 10% up front, 489.126 deadlines for permits and starting work apply.

Draw schedule

Tie payments to completed, inspected stages: foundation, framing and dry-in, rough-ins, insulation and drywall, finishes, final. NAHB's stage shares give you a sense of proportion. A draw far ahead of the work in place is a warning sign. See deposits and payment schedules.

Being your own builder on a custom home

Census counts owner-built homes separately: homes where the owner acts as the general contractor. In the South in 2025, about 23,000 owner-built homes were completed, compared with about 68,000 contractor-built homes. Owner-built homes were smaller (median 2,113 square feet) and more often one story (74%) and on septic (56%).

Acting as your own builder can save the contractor's overhead and profit, which were 5.7% and 11.0% of the sales price in NAHB's 2024 survey of builders. But you take on the work those percentages pay for: scheduling trades, buying materials, managing inspections, safety, insurance and fixing mistakes.

Florida rules

Under s. 489.103(7), you may build a one- or two-family home for your own use, not for sale or lease. You must appear in person, sign the permit application and the statutory disclosure statement, and directly supervise all work not done by licensed contractors. Unlicensed workers you pay are your employees for tax and workers' comp purposes, and electrical, plumbing, roofing and A/C work should go to licensed trade contractors. Selling or leasing within 1 year after completion creates a presumption you built for sale.

Texas rules

Texas has no state general contractor license, so owners can manage their own builds, but cities control permits and some require owner registration or affidavits. Electrical, plumbing and HVAC work by others requires state-licensed contractors. See the Texas owner-builder guide and Florida owner-builder permits.

Inspections and quality control during the build

Building department inspections check code minimums at set stages. They are not a quality inspection of your house. Texas's required 53.255 disclosure makes the same point: inspections done for others, including government inspections, are not quality-control inspections, and owners are encouraged to inspect or hire an independent inspector.

When to bring in an independent inspector

  • Pre-pour: forms, reinforcing steel or post-tension cables, under-slab plumbing and vapor barrier, before concrete.
  • Framing: after framing, sheathing, windows and roof dry-in, before insulation. In Florida, check wind straps and connectors against the plans.
  • Pre-drywall: rough plumbing, electrical, HVAC and insulation.
  • Final: before the final payment and walkthrough.

Write inspection access into your contract and schedule them around the builder's timeline. Inspection reports are also useful evidence later if you need to use Texas's RCLA or Florida's ch. 558 defect process. See building inspections explained and punch list and closeout.

Questions to ask a custom home builder about price

  1. Is your price fixed, cost-plus, or cost-plus with a guaranteed maximum? What is your fee?
  2. What square footage is your per-square-foot number based on?
  3. What is excluded: site work, utilities, driveway, landscaping, fees, design, appliances?
  4. What are the allowances, in dollars, and do they include installation and markup?
  5. What foundation have you assumed, and will you price the engineer's design after the soils report?
  6. Which windows, doors and roof system are included, and do they meet the wind rating for this site?
  7. How do you price change orders, and what is your markup on them?
  8. How long is this price valid, and is there a material escalation clause?
  9. What is the draw schedule, and what proof of completed work and lien releases comes with each draw?
  10. What warranty do you provide, in writing?
  11. In Florida: what is your license number and class? In Texas: are you registered with the city, and which licensed trade contractors will you use?
  12. Can I see two houses you finished in the last two years, and talk to the owners?

More in questions to ask a contractor and how to hire a general contractor.

City guides

Permit portals, impact fees and utility rules differ by city and county. For local details, see the Texas guide with Houston, Dallas, San Antonio and Austin, and the Florida guide with Miami, Tampa, Orlando and Jacksonville.

Costs that continue after you move in

  • Property taxes, including any special district taxes in Texas MUDs.
  • Homeowner's insurance, and flood insurance in or near flood zones. Florida wind-mitigation features can affect premiums; ask your agent which features count.
  • HOA dues and assessments.
  • Maintenance and warranty follow-up. Keep the builder's warranty, product warranties and as-built photos. See home builder warranties.
  • Landscaping maturity. Sod and irrigation budgets often get cut at the end and cost more later.

How to get an accurate number for your house

  1. Buy or option the lot only after a survey, soils report, utility check and zoning review.
  2. Develop plans at least to the point of floor plans, elevations and a finish schedule.
  3. Ask your county or city for a permit and impact fee estimate for the plan.
  4. Get two or three builders to price the same plans and specifications, with allowances written as dollar amounts.
  5. Level the bids line by line using NAHB's stage categories as a checklist.
  6. Compare the result to the Census South range ($157.30 median, $179.96 average per sq ft in 2025). If you are far outside it, find out why.
  7. Add your owner costs and a contingency, then decide.

How to choose a provider

  • Confirm the lot's survey, zoning, flood zone, utilities and soils before buying.
  • In Texas, read the MUD or utility district notice for the lot.
  • Get the county and city permit and impact fee estimate.
  • Develop plans and a finish schedule before pricing.
  • Get two or three bids on the same plans with dollar allowances.
  • Level bids by NAHB stage categories.
  • Compare to Census South per-square-foot figures.
  • Add lot, owner costs and contingency.
  • Use the required Texas or Florida contract notices.
  • Tie draws to completed, inspected stages with lien releases.
  • Schedule independent inspections before the slab pour, after framing, before drywall and before final payment.

Related general and residential contractors guides

General and residential contractors by state and city

Questions people ask

How much does it cost to build a custom home in Texas?

No neutral source publishes a Texas-only figure. The Census Bureau's 2025 data for the South region, which includes Texas, put the median contract price for contractor-built homes on owners' land at $157.30 per square foot and the average at $179.96, excluding the lot. A 2,500-square-foot home at the median would be about $393,000 before land, site extras and owner costs.

How much does it cost to build a house in Florida?

Florida is also in the Census South region, where the 2025 median contract price for contractor-built homes was $157.30 per square foot and the median total contract price $388,100, lot excluded. Florida wind and flood requirements, impact fees and lot prices can push local costs above the regional figures, so get detailed bids for your plan and county.

What is the average cost per square foot to build a house?

Nationally, NAHB's 2024 survey found builders' construction cost averaged about $162 per square foot, a record. Census's 2025 data put the U.S. median contract price for owner-land homes at $171.57 per square foot and the South's at $157.30. These exclude the lot. Per-square-foot figures vary widely with size, design and finishes.

What percentage of a new home's price is construction cost?

In NAHB's 2024 Cost of Constructing a Home survey, construction costs were 64.4% of the average sales price, a record high. The finished lot was 13.7%, builder profit 11.0%, overhead 5.7%, sales commission 2.8%, the builder's interest and carrying costs 1.5% and marketing 0.8%.

How much does the land cost compared with the house?

In NAHB's 2024 survey, the finished lot averaged $91,057, or 13.7% of the sales price, on an average lot just under half an acre. Raw land can cost less per acre but needs utilities, roads, clearing and drainage. Census contract-price data exclude the lot, so add land separately.

What are impact fees and how much are they?

Impact fees are one-time charges on new construction to pay for roads, schools, parks, water and other public facilities. NAHB's 2024 national average was $6,367, or 1.5% of construction cost, but local amounts vary widely. In Florida, s. 163.31801 limits how fees are set and increased. In Texas, city impact fees under LGC ch. 395 cover only water, wastewater, drainage and roadway facilities.

How much does site work cost?

In NAHB's 2024 survey, the site work stage, which includes building permit fees ($7,640), impact fees ($6,367), water and sewer fees ($6,260), architecture and engineering ($6,480) and other site costs, averaged $32,719, or 7.6% of construction cost. Rural lots needing wells, septic, clearing or long driveways can cost much more.

How much does a foundation cost on Texas clay?

We found no neutral Texas-specific survey. Nationally, NAHB's 2024 survey put foundations at 10.5% of construction cost ($44,748). On expansive clay, engineered slabs (often post-tensioned) or piers recommended by a soils report can cost more. Get a geotechnical report and ask bidders to price the engineer's foundation design.

How much does hurricane code add to a Florida house?

We could not find a neutral, current study isolating that cost. The added items include impact-rated windows and doors or shutters, upgraded roof and wall connections, rated roof systems and product approvals, and in flood zones elevation and flood-resistant materials. Ask each bidder to price these items as separate lines.

What are soft costs in home building?

Soft costs are the non-construction costs: design, engineering, surveys, soils reports, permits, impact and utility fees, insurance during construction and your carrying costs. In NAHB's 2024 survey, permits, impact fees, water and sewer fees and architecture and engineering together were about 6.3% of construction cost.

Is it cheaper to build or buy a house?

Usually buying is cheaper per square foot. In 2025, Census put the South's median sale price per square foot of new homes sold at $144.89, versus $157.30 for contractor-built homes on owners' land, both excluding the lot. Building can still make sense if you own the land or need a home that is not for sale.

How big is a typical custom home in the South?

Census data for 2025 put the median contractor-built home in the South (homes built on the owner's land) at 2,482 square feet and the average at 2,865 square feet, compared with a median of 2,162 square feet for all new single-family homes in the region. About 17% of the custom homes were 4,000 square feet or more.

Why do builders quote such different prices per square foot?

Builders measure and include different things. Some quote per conditioned square foot, others per square foot under roof including garage and porches. Many exclude site work, utilities, driveways, impact fees, design and landscaping, and allowances vary. Compare complete bids for the same plans and specifications instead of headline per-square-foot prices.

Do Southern custom homes usually have slab foundations?

Yes. In 2025, 75% of contractor-built homes completed in the South had slab foundations and 19% had crawl spaces, per Census. On Texas expansive clay, slabs are often engineered or post-tensioned based on a soils report. In Florida flood zones, homes may need stem walls, fill or pilings to reach the required elevation.

How much land do custom home owners usually buy?

In 2025, the median lot for a contractor-built home in the South was 36,436 square feet, about 0.84 acre, and 56% were half an acre or larger, according to Census. Larger rural lots often mean wells, septic systems, longer driveways and power extensions, which add to site costs.

Can I save money by being my own general contractor?

Possibly. Builders' overhead and profit were 5.7% and 11.0% of the sales price in NAHB's 2024 survey, and owner-builders avoid paying those. But you take on scheduling, purchasing, inspections, safety and the cost of mistakes. Florida's owner-builder exemption (s. 489.103(7)) has strict rules, and Texas cities control owner permits.

Are building department inspections enough for a custom home?

They check code minimums, not quality. Texas's required 53.255 disclosure tells owners that government inspections are not quality-control inspections. Many custom home owners hire an independent inspector before the slab pour, after framing, before drywall and before final payment. Outside Texas city limits there may be no government inspector at all: in counties that opt into Local Government Code ch. 233, subchapter F, the builder arranges at least three inspections, at the foundation, framing and mechanical, and final stages.

What does it cost to build a custom home in Houston, Dallas, Austin or San Antonio?

No neutral source publishes current city-level custom home costs for these metros. The Census Bureau's 2025 South region figures (median $157.30 and average $179.96 per square foot, lot excluded) are the best public benchmark. Lot prices, utility district taxes, soils and city fees vary a lot between and within these metros, so local bids are essential.

What does it cost to build a custom home in Miami, Tampa, Orlando or Jacksonville?

There is no free, neutral, current city-level figure. Use the Census 2025 South region numbers as a benchmark, then add Florida-specific items your bidders should price separately: impact fees for your county, wind-rated windows, doors and roofing, and any flood-zone elevation. Coastal and South Florida sites typically face the strictest wind requirements.

How much of a custom home budget goes to interior finishes?

In NAHB's 2024 national survey, interior finishes (insulation, drywall, trim, paint, lighting, cabinets, counters, appliances, flooring, plumbing fixtures and fireplaces) were the largest stage at 24.1% of construction cost, about $103,391. Your selections control this stage more than any other, so set allowances from real showroom prices.

Does a two-story house cost less per square foot than a one-story?

Often, because a two-story plan of the same living area needs less foundation and roof, and foundations and exterior finishes (including roofing) were 10.5% and 13.4% of construction cost in NAHB's 2024 survey. Stairs, floor framing and more complex HVAC offset part of the saving. Ask your builder to price your plan both ways.

Where can I check the Census custom home numbers myself?

The Census Bureau publishes annual Characteristics of New Housing tables from its Survey of Construction. The contract price and contract price per square foot tables cover contractor-built homes started, by region, and exclude the lot. Other tables show floor area, foundations, wall materials, stories, lot size and sewer type for homes completed. Texas and Florida are reported within the South region.

Can I build a modular home in Florida?

Yes. Since July 1, 2026, Florida law (new s. 553.385, Ch. 2026-63) requires local governments to permit offsite-constructed residential dwellings as of right in zoning districts where comparable homes are allowed. You still pay for the lot, foundation, site work, transport, setting and utility connections, and HOA restrictions may apply.

Do I need an architect to design a custom home?

Not under state law in either state for a one- or two-family home. Florida exempts one- and two-family residences regardless of cost (s. 481.229) and Texas exempts single-family and dual-family dwellings (Occupations Code 1051.606). Many owners still use an architect or residential designer, and an engineer for structure and wind.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration