New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Thu, Nov 19, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · General and residential contractors

Design-Build vs Hiring an Architect Then a Contractor: Which Delivery Method Fits Your Project?

How design-bid-build, design-build and construction management compare, when Texas and Florida law actually require an architect or engineer, and what design services cost.

Design-build gives you one contract for design and construction, with faster starts and early pricing but no independent designer checking the builder. Hiring an architect or designer first, then bidding to contractors, gives you an advocate and comparable bids but takes longer. In both Texas and Florida, one- and two-family homes do not legally need an architect, though many projects still need an engineer.

Key facts

  • Texas exempts single-family and dual-family dwellings, and private commercial buildings of up to two stories and 20,000 sq ft, from architect licensure (Occupations Code 1051.606).
  • Texas requires an architect for any building for 24-hour custodial care regardless of size (1051.703).
  • Texas's engineering exemption covers private dwellings and one-story buildings up to 5,000 sq ft with no span over 24 feet, but not windstorm-certification engineering (1001.056).
  • Florida exempts one- and two-family homes and townhouses from architect licensure regardless of cost, and other non-public buildings costing under $25,000 (s. 481.229).
  • A Florida ch. 489 general contractor may perform design-build if a licensed architect renders the architectural services (s. 481.229(3)).
  • Florida interior design registration does not apply to residential work (s. 481.229(6)); only the title 'registered interior designer' is protected (s. 481.223).
  • Texas protects only the title 'registered interior designer' (Occupations Code 1053.151).
  • NAHB's 2024 survey put architecture and engineering at $6,480, or 1.5% of construction cost, for a typical new home.
  • Florida general, building and residential contractors are responsible for any alteration of a structural component (s. 489.113).

The three main ways to deliver a building project

A project delivery method is simply the answer to two questions: who designs the project, and who builds it, and how those people are tied to you by contract. The method you choose shapes your price certainty, your schedule, how much control you keep over design, and who you call when the drawings and the building do not match.

Design-bid-build (the traditional route)

You hire a designer first: an architect, an engineer, a residential designer or, for small jobs, a draftsperson. The designer works for you and produces drawings and specifications. You then send that package to several contractors for bids (or negotiate with one), sign a construction contract with the contractor you pick, and the designer often stays on to answer questions and review the work. You hold two separate contracts.

Strengths: the designer is your advocate, bids are comparable because everyone prices the same drawings, and you can shop the construction price. Weaknesses: it is usually the slowest path, the contractor has no input during design (so you may design something that prices badly), and when the drawings are wrong or incomplete you can end up in the middle of an argument between designer and builder.

Design-build

One company holds a single contract with you for both design and construction. The design-builder either employs designers or hires them as consultants. On homes, this is common for kitchens, baths, additions and custom houses. On commercial work, it is common for tenant build-outs and simple buildings.

Strengths: one point of responsibility, pricing feedback during design, and often a faster start because design and preconstruction overlap. Weaknesses: you lose the independent designer who checks the builder's work, early prices are estimates until the design is finished, and comparing two design-build proposals is harder because each one designs something different.

Construction management

Common on larger commercial and institutional projects. With construction management at risk (CMAR), you hire a designer and a construction manager early. The construction manager gives cost and schedule advice during design and then becomes the builder, often under a guaranteed maximum price (GMP). With construction management as agent, the manager advises you for a fee but does not hold the trade contracts or take the price risk; you sign with trade contractors directly.

Owner-coordinated ("being your own GC")

You hire the designer and each trade yourself. It can save the GC's markup on simple projects but puts scheduling, inspections, safety, and the legal responsibilities of an owner-builder on you. See Florida owner-builder permits and the Texas owner-builder guide.

Side-by-side comparison

FactorDesign-bid-buildDesign-buildCM at risk (GMP)
Contracts you signTwo (designer, builder)OneTwo (designer, CM)
When you know the priceAfter bids on finished drawingsEstimate early, firm when design is doneGMP partway through design
Who checks the builder for youYour designerYou, or a separately hired consultantYour designer
SpeedSlowest (design, then bid, then build)Often fastestFast; phases overlap
Competitive pricingStrong on the whole jobWeaker; choose on qualifications plus priceOn trade packages, not the CM fee
Change riskDesign errors become change ordersBuilder owns design errorsShared; depends on the GMP terms
Best forCustom homes, complex remodels where you want an advocateKitchens, baths, additions, simple commercialLarger commercial and multi-phase work

None of these is automatically cheaper. Design-build can save money by catching expensive details early and avoiding redesign, and it can cost more because there is less head-to-head price competition. Design-bid-build can produce the lowest construction bid, and then cost more through change orders if the drawings are thin. The cheapest method is the one whose risks you understand and manage. See fixed price vs cost-plus vs T&M for how pricing models layer on top.

When the law requires an architect in Texas

Texas licenses architects under Occupations Code chapter 1051, but section 1051.606 lists work that a person who does not claim to be an architect may still do. A person may prepare plans and specifications for, or supervise construction, enlargement or alteration of, a privately owned building that is:

  • used primarily for farm, ranch or agricultural purposes, or storage of raw agricultural commodities;
  • a single-family or dual-family dwelling, or a building or appurtenance associated with it;
  • a multifamily dwelling no more than two stories tall with no more than 16 units per building;
  • a commercial building no more than two stories tall and no more than 20,000 square feet; or
  • a warehouse with limited public access.

The same section also lets a non-architect prepare plans for an alteration of any building unless the alteration involves a substantial structural or exitway change (1051.606(a)(3)).

Section 1051.703 goes the other way and says some plans may be prepared only by an architect, including any new building or modification intended for 24-hour occupancy by people receiving custodial care, regardless of size, and certain public buildings for education, assembly or office use above $100,000 (new) or $50,000 (alterations that move walls or exits).

What it means for you: a Texas homeowner remodeling or building a one- or two-family house does not need a licensed architect under state law. A small business building out a one- or two-story commercial space of 20,000 square feet or less may not either. But nobody who is not licensed may call themselves an architect, and your city's building department can still demand drawings that meet its submittal standards.

When the law requires an engineer in Texas

Engineering is a separate license (Occupations Code chapter 1001). Section 1001.056 exempts a person who does not offer engineering services to the public and is building, altering or drawing plans for:

  • a private dwelling;
  • apartments of no more than eight units per building if one story, or four units per building if two stories;
  • a garage or other structure pertinent to those buildings;
  • a private farm, ranch or agricultural building; or
  • a one-story building of no more than 5,000 square feet with no clear span over 24 feet on the narrow side (longer spans need engineered or pre-engineered roof supports).

Two cautions. First, the exemption does not cover engineering design or inspection needed to meet windstorm certification standards for a residential dwelling under Insurance Code chapter 2210, which matters on the Texas coast. Second, the statute only says who may legally do the work. Many Texas cities and production builders still want an engineer's sealed design for foundations, because expansive clay soils in much of the state move with moisture. Ask your building official what the city requires and ask your lot's soils report what it recommends. See Do I need a permit in Texas?.

When the law requires an architect in Florida

Florida's exemptions are in s. 481.229. Nobody needs to be an architect to make plans for, or supervise building, enlarging or altering:

  • any building on a farm for a farmer's use, regardless of cost;
  • any one-family or two-family residence, townhouse, or domestic outbuilding appurtenant to a one- or two-family residence, regardless of cost; or
  • any other building costing less than $25,000, except a school, auditorium or other building intended for public use.

So in Florida a homeowner's remodel or new single-family home does not legally need an architect, but most commercial build-outs of $25,000 or more do need a licensed design professional's drawings. Two more Florida rules matter for delivery method:

  • Design-build by contractors: a Florida general contractor certified or registered under ch. 489 does not need an architect's license to negotiate or perform a design-build contract, as long as the architectural services are offered and rendered by a licensed architect (481.229(3)).
  • Engineers and architects crossing over: a registered engineer whose main practice is civil or structural engineering may perform architectural services purely incidental to that practice, and an architect may perform incidental engineering, but neither may use the other's title (481.229(4)).

Florida's engineering law (s. 471.003) lets a contractor build work designed by a professional engineer and supervise construction as a foreman or superintendent without an engineering license. It also lets a person practice engineering on property they legally own unless the work involves a public utility or the public health, safety or welfare, and that exception does not let them do it through an unlicensed agent. In practice, Florida's wind-load and flood requirements mean structural details for new homes and additions are usually prepared or reviewed by an engineer. Ask your building department what it needs for your permit. See Do I need a permit in Florida?.

Interior designers and residential designers

Florida

Florida registers interior designers under Part II of chapter 481. The statute defines interior design as design work on nonstructural interior elements, such as reflected ceiling plans, space planning and furnishings, and expressly excludes architectural and engineering work on structural, mechanical, plumbing, HVAC, electrical or life-safety systems (481.203). Two points for owners:

  • The interior design rules do not apply to residential work. Anyone may provide interior design or decorating services for homes, apartments, condos and townhouses (481.229(6)).
  • The title "registered interior designer" is protected; "interior designer" by itself is not (481.223). And an interior designer is not a contractor; they may not act as a contractor unless licensed under ch. 489 (481.229(7)).

Texas

Texas uses a title act. Only a registered person may use the title "registered interior designer" (Occupations Code 1053.151), and the chapter does not apply to someone who does not use that title (1053.002). In practice, any designer may help you plan a home kitchen or bath in Texas.

Residential designers and drafters

Because both states exempt one- and two-family homes from architect licensing, a large share of Texas and Florida house plans are drawn by residential designers or drafting services who are not architects. Some hold voluntary private certifications. When you hire one, ask whether they carry professional liability insurance, whether they will coordinate with a structural engineer, and whether their drawings have passed permit review in your city recently.

Can a contractor draw my plans?

Often yes, for work the law exempts. A Texas contractor may prepare plans for an exempt building (a home, a small commercial building) the same way any non-architect may under 1051.606, so long as they do not call themselves an architect. A Florida contractor may prepare plans for exempt work under 481.229(1), and may offer design-build on non-exempt work if a licensed architect provides the architectural services.

Before you rely on contractor-drawn plans, ask:

  • Who is actually drawing them, and what is their training?
  • Will an engineer design the structure (beams, foundations, wind connections) and seal those sheets?
  • Who owns the drawings if you part ways before construction? Many design-build agreements say the builder owns the design until you pay for it.
  • What does the design phase cost, and is it credited against construction if you proceed?

A good practice is a separate, paid preconstruction or design agreement with a fixed fee, deliverables (floor plans, elevations, a budget estimate) and an exit: you own the drawings once you pay, even if you hire someone else to build.

What a structural engineer does on a remodel

A structural engineer calculates loads and designs the parts that hold the building up: beams that replace a removed wall, headers over wider openings, foundation repairs, second-story additions, roof framing changes, and connections that resist wind uplift. Typical deliverables are a site visit, a letter or calculations, and sealed details your contractor builds to.

You will usually want one when you:

  • remove or move a load-bearing wall;
  • add a second story or a heavy roof (tile, solar on an older roof);
  • see foundation movement, which is common on Texas expansive clay;
  • change openings in exterior walls in high-wind areas of Florida;
  • build an addition that ties into an existing foundation.

In Florida, general, building and residential contractors are the license classes responsible for any construction or alteration of a structural component (489.113), so a handyman should never be the one removing a bearing wall.

What architects and designers cost

There is no free, neutral, current survey of residential architect fees for Texas or Florida. Fee surveys published by professional associations are generally sold to members, and design websites that quote ranges usually do not show their data. So here is what we can source, and how fees are structured.

What one national survey shows for new homes

NAHB's 2024 Cost of Constructing a Home survey, based on 41 usable builder responses for a typical 2,647-square-foot home, put architecture and engineering at $6,480 on average, or 1.5% of construction cost. That figure reflects production and semi-custom builders who reuse plans, not a one-off architect-designed custom home, so treat it as a floor, not a typical custom fee.

How fees are structured

StructureHow it worksWatch for
Percentage of construction costFee is a set percent of the final construction costFee rises if the project grows; agree on what "construction cost" includes
Fixed feeA lump sum for defined phasesExtra charges for redesign or added scope
HourlyBilled per hour, sometimes with a capAsk for a not-to-exceed amount per phase
Per square footCommon with residential designers and draftersConfirm what drawings are included

Phases you may be buying

  1. Programming and site analysis (what you need, what the lot allows).
  2. Schematic design (floor plans and massing).
  3. Design development (materials, systems, more detail).
  4. Construction documents (permit and bid set).
  5. Bidding or negotiation support.
  6. Construction administration (site visits, answering contractor questions, reviewing pay requests).

You can buy only the first four phases to save money, but you lose the designer's eyes during construction, which is where the third-party check of design-bid-build pays off. Ask any designer to quote by phase.

Who coordinates the design team?

On a remodel or house, the design team can include an architect or residential designer, a structural engineer, sometimes a mechanical, electrical and plumbing (MEP) engineer, a surveyor, a soils engineer for new construction, an interior designer and a kitchen designer. Somebody has to make their work fit together.

  • Design-bid-build: the architect or lead designer usually coordinates consultants. Confirm that in the design contract.
  • Design-build: the design-builder coordinates. Ask which consultants are in-house and which are hired, and whether you can talk to them directly.
  • Owner-coordinated: you do it. Expect to spend real time resolving conflicts between a beam size and a duct run.

Whatever the method, put one name in the contract as the person responsible for design coordination.

How to choose the right method for your project

Your situationUsually a good fitWhy
Cosmetic kitchen or bath, no walls movingGC or design-build remodelerDesign is simple; one contract is efficient
Kitchen opening to living room (bearing wall)Design-build with an engineer, or designer plus GCStructure needs engineering; scope needs pricing feedback
Addition or second storyDesigner plus engineer, then bid; or design-buildZoning, HOA, foundation tie-in; comparable bids help
Custom home on your lotArchitect or residential designer, then 2-3 buildersBig money; independent advocate and competitive pricing
Restaurant or medical build-outArchitect (often required) plus GC, or design-build with specialty experienceHealth, fire, accessibility and equipment coordination
Office or retail tenant spaceLandlord's architect plus GC, or design-buildLease work letter often dictates; speed matters
Condo unit renovationDesigner plus GC familiar with the buildingAssociation approvals and building systems

Related guides: kitchen remodels, home additions, custom home process, tenant build-outs, restaurant build-outs, medical offices and Florida condo renovations.

Contract terms to get right in each method

Design contracts

  • Scope by phase, deliverables and number of revisions included.
  • Fee and how extra services are priced.
  • Ownership and license to use the drawings.
  • Construction administration: how many site visits, who reviews pay applications.
  • Professional liability insurance and limits.
  • A budget target and what happens if bids come in over it (redesign at no charge?).

Design-build contracts

  • A separate design phase with a fixed fee and an off-ramp.
  • When the price becomes fixed, and what allowances remain.
  • Who the licensed architect or engineer is when the law requires one. In Florida, a ch. 489 contractor offering design-build must have a licensed architect render the architectural services (481.229(3)).
  • That the design-builder warrants the design meets code.

Construction contracts (all methods)

Include the state-required notices: in Florida, the Recovery Fund notice (489.1425) and the lien-law notice for 1 to 4 unit homes over $2,500 (713.015); in Texas, the 53.255 lien disclosure before signing a residential contract and the 10-point Chapter 27 notice. See the construction contract checklist and required contract notices.

Verifying designers and builders

  • Florida architects, interior designers and engineers: look up licenses on DBPR's license search (architects and registered interior designers) and the Florida Board of Professional Engineers (engineers).
  • Florida contractors: DBPR license search; match the CGC, CBC or CRC number to the scope (see Florida license lookup).
  • Texas architects and registered interior designers: Texas Board of Architectural Examiners.
  • Texas engineers: Texas Board of Professional Engineers and Land Surveyors.
  • Texas contractors: no state GC license; check city registration and trade licenses (see Texas city registration).

Anyone who uses the title "architect" without a license breaks the law in both states. In Florida, using the title architect or registered interior designer without a license is a first-degree misdemeanor (481.223).

How to choose a provider

  • Decide how much design control and price certainty you need.
  • Check whether your project legally needs an architect (TX 1051.606/1051.703, FL 481.229).
  • Ask your building department what drawings and engineering it requires.
  • Get phased fee proposals from designers or a design-phase agreement from a design-builder.
  • Confirm who owns the drawings and when.
  • Name one person responsible for design coordination.
  • Verify every license (DBPR, TBAE, engineering boards, city registration).
  • Set a budget target and what happens if bids exceed it.
  • Keep a construction-administration role for your designer if you can.
  • Include the state-required notices in the construction contract.

Related general and residential contractors guides

General and residential contractors by state and city

Questions people ask

Is design-build cheaper than hiring an architect and then a contractor?

Not automatically. Design-build can save money by pricing the design as it develops and avoiding redesign, but it has less head-to-head bidding on the whole job. Design-bid-build can produce a lower construction bid, then cost more if thin drawings lead to change orders. Ask each option for a phased fee, an early budget and a clear point when the price becomes firm.

Do I need an architect to remodel my house in Texas?

Not under state law for a single-family or dual-family dwelling. Texas Occupations Code 1051.606 lets non-architects prepare plans for those homes, and for alterations of other buildings that do not involve substantial structural or exitway changes. They may not call themselves architects, and your city may still require engineered drawings for structural work.

Do I need an architect to build a house in Florida?

No. Florida Statutes s. 481.229 exempts one-family and two-family residences, townhouses and their outbuildings from architect licensure regardless of cost. Most new Florida homes still need engineering for wind and flood design, so expect an engineer's involvement even without an architect.

When is an architect required for a commercial build-out?

In Texas, privately owned commercial buildings up to two stories and 20,000 square feet are exempt (1051.606), but buildings for 24-hour custodial care always need an architect (1051.703). In Florida, only non-public buildings costing under $25,000 are exempt (481.229), so most commercial build-outs need a licensed design professional.

Can an interior designer move walls in Florida?

Florida's definition of interior design covers nonstructural elements only and excludes structural, mechanical, plumbing, electrical and life-safety work (s. 481.203). Residential interior design is exempt from registration altogether. An interior designer cannot act as a contractor unless licensed under chapter 489, so wall changes still need proper design and a licensed contractor.

What is construction management at risk?

A delivery method where you hire a construction manager during design for cost and schedule advice, and the manager then builds the project, usually under a guaranteed maximum price. It is common on larger commercial and public projects. The manager's fee is negotiated; trade work is typically bid out in packages.

What does a structural engineer charge for a remodel?

We could not find a neutral, current, public survey of structural engineering fees in Texas or Florida. Fees depend on whether you need a site visit and letter, calculations for one beam, or a full sealed design for an addition. Ask two or three engineers for a fixed fee for a defined deliverable, and ask your contractor what your building department requires.

Who owns the plans in a design-build contract?

Whatever the contract says. Many design-build agreements keep ownership with the builder until the design is paid for, and some never transfer it. If you want the option to bid the job elsewhere, sign a separate paid design agreement that gives you the right to use the drawings once you pay.

Is a Florida contractor allowed to offer design-build?

Yes. A general contractor certified or registered under chapter 489 does not need an architect's license to negotiate or perform a design-build contract, as long as the architectural services are offered and rendered by a licensed architect (s. 481.229(3)). In Texas, Occupations Code 1051.606 lets a non-architect prepare plans for a privately owned one- or two-family home, so design-build is common there without an architect.

Do Texas coastal homes need an engineer?

Texas's engineering exemption for private dwellings (Occupations Code 1001.056) does not cover engineering design or inspection needed for windstorm certification of a residential dwelling under Insurance Code chapter 2210. If your home is in a designated catastrophe area, plan on an engineer or qualified inspector for windstorm work.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration