New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Thu, Nov 19, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · Standby generator installation

How Much Does a Whole-House Standby Generator Cost Installed in Texas and Florida?

A line-by-line look at what a permanently installed home generator costs in 2026, what drives quotes apart, what it costs to run, and how Texas and Florida rules change the bill.

A standby generator with an automatic transfer switch typically costs $7,882 to $15,050 installed, averaging $10,941, per Homeyou's guide updated September 2026. Systems that run every circuit cost $12,041 to $22,586. Gas piping, propane tanks, trenching and some permits are often billed separately, so compare itemized quotes. Our calculation puts a 20 kW unit at half load near $3 to $4 an hour on natural gas and $7 to $12 on propane in Texas and Florida.

Key facts

  • Homeyou (Sept. 2026): standby generator with automatic transfer switch, $7,882 to $15,050 installed, average $10,941.
  • Homeyou (Sept. 2026): whole-home systems that cover every circuit, $12,041 to $22,586, average $16,316, often with panel or meter upgrades.
  • Homeyou (Sept. 2026): essential-circuits backup, $4,205 to $7,932, average $5,888; portable generator with transfer switch hookup, $990 to $2,909.
  • Homeyou (Sept. 2026) add-ons: concrete pad $588 to $1,994, buried conduit $688 to $2,497, load management $749 to $2,808, surge protection $316 to $1,191.
  • Homeyou (Sept. 2026): emergency or rush installs run $9,228 to $17,768; its South region range ($6,375 to $12,699) is the lowest of four U.S. regions.
  • Inch Calculator (Aug. 2023): permits usually $50 to $200; electricians charge $50 to $200 an hour; labor and installation $2,000 to $5,000 on top of the unit.
  • EIA: 2025 average residential natural gas price was $19.42 per thousand cubic feet in Texas and $25.48 in Florida; residential propane was $3.209 a gallon in Texas and $5.167 in Florida the week of Nov. 16, 2026.
  • Manufacturer A's 20 kW residential manual lists 161 cubic feet per hour of natural gas or 82 cubic feet per hour of propane vapor at 50% load (about 2.3 gallons per hour, our conversion).
  • Texas Property Code 202.019 makes an HOA location rule unenforceable if it raises generator installation cost by more than 10% or fuel and electrical line cost by more than 20%.
  • BLS 2025 data (via O*NET): median electrician pay ranges from $24.43 an hour in the Orlando metro to $29.03 in the Austin metro.

What does a standby generator cost installed in 2026?

Most homeowners in Texas and Florida who get quotes for a permanently installed generator see totals between about $8,000 and $15,000. The most recent dated national survey we could check, Homeyou's cost guide updated September 24, 2026, puts a standby generator with an automatic transfer switch at $7,882 to $15,050, with an average of $10,941. A "whole-home" system built to run every circuit at once costs more, $12,041 to $22,586, because it usually needs the largest generator, a bigger transfer switch and often a panel or meter upgrade.

Those figures are national. Homeyou's regional table lists the South, which includes Texas and Florida, as the lowest-cost of its four regions at $6,375 to $12,699 for generator installation generally. No named, dated source we found publishes a Texas-only or Florida-only installed price, so treat regional numbers as a starting point, not a quote.

Setup (Homeyou, Sept. 2026)Typical rangeAverageWhat it usually powers
Portable generator with transfer switch hookup$990 to $2,909$1,693A handful of circuits you pick; you start and fuel the portable unit
Essential-circuits backup$4,205 to $7,932$5,888Fridge, some lights, fans, furnace blower, a pump
Outdoor unit for larger loads$6,013 to $11,845$8,500Larger loads such as multiple HVAC zones, kitchen circuits, water heater
Standby generator with automatic transfer$7,882 to $15,050$10,941Starts by itself; selected or whole-home loads
Whole-home backup system$12,041 to $22,586$16,316Every circuit and major appliance

An older estimate from Inch Calculator (updated August 7, 2023) said most homeowners spent around $7,500 for a whole-home standby unit and that an automatic whole-house unit might cost as much as $10,000 installed. The gap between the 2023 and 2026 numbers shows why you should always check the date on any cost figure you read, including ours.

The rest of this page breaks those totals into the pieces you will actually see on a quote, then explains why two quotes for the same generator can land thousands of dollars apart.

What is in a standby generator quote? The full cost stack

A generator quote is really six or seven small projects bundled together: equipment, electrical work, fuel work, site work, paperwork, startup and service. Homeyou notes that many installers price gas piping, propane tanks, trenching and some permits as separate line items, which is the single biggest reason totals are hard to compare. Use this table as a checklist when you read a bid.

Line itemWhat it coversDated cost figure we could verify
Generator unitThe engine-alternator in its outdoor enclosure, sized in kWNo verified 2026 list price; ask for the model number and unit price as its own line
Automatic transfer switch (ATS)Switches your home from utility to generator and backTransfer switch install $829 to $2,652; ATS upgrade $1,291 to $4,315 (Homeyou, 2026)
Concrete or composite padLevel base the manufacturer specifies$588 to $1,994 when billed separately (Homeyou, 2026)
Electrical labor and materialsWiring between generator, ATS and panel; breakers; groundingElectricians $50 to $200 an hour; labor and installation $2,000 to $5,000 on top of the unit (Inch Calculator, 2023)
Buried conduit and trenchingUnderground runs for power and control wiring$688 to $2,497 (Homeyou, 2026)
Natural gas pipingNew line from the meter to the generator, valve, leak testNo dated figure verified; price depends on length and pipe size
Gas meter or regulator upgradeLarger meter if the existing one cannot carry the generator plus appliancesSet by your gas utility; get the fee in writing
Propane tankTank (leased or bought), set, regulators, line to generatorNo dated figure verified; one manufacturer requires at least 250 gallons
Sub-panel or panel workSeparate panel for essential circuits, or panel changesSub-panel about $500 to $2,000 (Inch Calculator, 2023)
Load managementModules that shut off big loads to protect the generator$749 to $2,808 (Homeyou, 2026)
Permits and inspectionsElectrical, gas or plumbing, sometimes zoningUsually $50 to $200 (Inch Calculator, 2023); check your local fee schedule
Florida wind or flood engineeringAnchoring details, elevated stand, engineering letter if requiredNo dated figure verified; ask the permit office what it needs
Surge protectionWhole-system surge device$316 to $1,191 (Homeyou, 2026)
Startup and registrationFirst start, load test, warranty registrationOften included; confirm in writing
First-year maintenanceOil, filter, plugs, inspection$186 to $568 a visit, average $316 (Homeyou, 2026)

Optional extras Homeyou lists for 2026 include sound attenuation ($829 to $3,411), a cold weather kit ($347 to $1,291) and remote monitoring ($286 to $1,201). In most of Texas and Florida a cold weather kit is a judgment call, but Uri showed that North and Central Texas can see days of hard freeze. Manufacturer A, for example, recommends its cold weather heater kits where the temperature drops below 32 F.

When a line in your quote says "basic installation included," ask what that means. Homeyou describes a typical standby price as often including the pad, wiring, startup testing and basic permits, while gas piping, propane tanks, trenching and some fees are separate. Two bids that both say "installed" can describe very different scopes.

Why do generator quotes vary by $5,000 or more for the same unit?

If you collect three bids for the same 22 kW generator and they read $11,000, $14,500 and $17,000, it does not always mean someone is overcharging. These are the usual reasons, roughly in order of how much they move the total.

  1. Distance from the meters. Manufacturer C's placement guidance notes that longer electrical conduit and fuel line runs raise cost because of trenching, and that placing the unit near the gas and electric meters keeps cost down. A generator 60 feet from the gas meter needs more pipe, often a larger pipe size, and more digging than one 10 feet away.
  2. Pipe size. Manufacturer A's pipe sizing table for its 20 kW unit on natural gas calls for 1-inch pipe up to 50 feet and 1-1/4 inch pipe at 100 to 200 feet, and adds 8 feet of equivalent length for each 90-degree elbow. Bigger pipe costs more to buy and install.
  3. Meter capacity. Manufacturer A states the utility meter must supply the generator at rated load plus all other gas appliances. If yours cannot, the utility may need to swap the meter or regulator, which can add cost and weeks of waiting.
  4. Transfer switch type and panel condition. A service-rated whole-house switch, a smaller essential-circuit switch and a switch with load management are different parts with different labor. Older panels can need repairs once opened. Homeyou lists older wiring and grounding upgrades among common surprises.
  5. Propane tank arrangement. Leasing a tank from a supplier, buying one outright, burying it or setting it above ground all change the bill.
  6. Site work. Rock, tree roots, sprinkler lines, slab-on-grade foundations, fences and tight side yards slow the crew down.
  7. Florida wind and flood work. An elevated stand, anchors and paperwork can add a meaningful amount in coastal counties.
  8. Season and urgency. Homeyou's 2026 table puts emergency or rush installs at $9,228 to $17,768 versus $7,882 to $15,050 for a normal standby install.
  9. What is left out. The cheapest bid often omits trenching, the gas line or permits. Ask every bidder to fill in the same line items.

The fix is simple: send all bidders the same scope sheet and ask them to price each line. Our guide on getting and comparing installer quotes has a template.

Which size is the best value: 14, 18, 22 or 26 kW?

Size drives the price of the generator itself and of the parts around it. Homeyou notes that larger kW ratings usually need more expensive equipment, heavier wiring and larger transfer switches. But the cheapest generator is not the best value if it cannot start your air conditioner.

One manufacturer's sizing guide (Manufacturer B, August 2026) frames the choices this way:

Home and loadsManufacturer guidance (Manufacturer B, Aug. 2026)
About 1,550 sq ft10 kW to 14 kW with one or two load managers to prioritize AC and well pump; step up to 18 kW with an electric heat pump or high-draw medical equipment
About 2,000 sq ft18 kW to 22 kW described as "the sweet spot"; typically 20 kW or 22 kW
2,500 to 3,000 sq ft22 kW described as "the industry standard for whole-home protection," depending on how many big loads run at once

The same page warns that two homes with the same floor plan "could require generators with an 8kW gap or more," which is why square footage alone is a poor way to buy. Our load calculation walkthrough shows how to size from your actual appliances.

Cost per kilowatt

We could not verify current manufacturer list prices for specific models, so we do not publish a per-kW price curve. You can build your own: divide each quoted unit price (not the installed total) by the unit's kW rating on the fuel you will use. A unit sold as 22 kW is usually rated on propane; Manufacturer C says natural gas output is typically about 10% lower on its models and 10 to 15% lower across the industry. On natural gas, a "22 kW" unit might deliver closer to 19 to 20 kW, which changes the math.

Two patterns are worth knowing even without list prices. First, many installation costs (permit, pad, trench, startup) are about the same for a 14 kW and a 22 kW unit, so the installed cost per kW usually drops as size goes up. Second, once you pass the largest air-cooled sizes, you move into a different class of equipment. See air-cooled vs liquid-cooled generators; we did not find a named, dated source pricing that jump, so get both quoted if your load is borderline.

When load management beats a bigger generator

Homeyou prices load management at $749 to $2,808 in 2026. Manufacturer B's sizing page says a mid-sized unit with load management can cost less to buy and run than a larger unit sized for the worst-case peak. If the difference between an 18 kW and a 22 kW quote is larger than the cost of two load modules, ask the installer to price both designs. Our whole-house vs essential circuits guide explains the trade-off.

How much does the fuel hookup add: natural gas line, meter and propane tank

Natural gas (most Texas metro homes, parts of Florida)

For a home already on natural gas, the fuel cost is mostly the new pipe from the meter to the generator plus any meter or regulator change. Manufacturer A's installation manual tells installers to have the fuel supplier install rigid gas piping and a manual shutoff valve and to leak-test the line. It also lists the supply pressure its units need: 5 to 11 inches of water column for natural gas (3.5 to 11 for its 20 kW model) and 7 to 11 for propane. If your service runs at the low end, a long run of small pipe can starve the generator under heavy load.

Before you sign, call your gas utility and ask three things: Is my meter large enough for my appliances plus a generator of this size? Will you need to change the meter or regulator? What will you charge, and how long does it take? We could not verify published meter-upgrade fees for Texas or Florida gas utilities, so get the answer in writing. Our page on natural gas meter upgrades walks through the process.

In Texas, piping that connects a building to a gas supply on the premises falls within the state's definition of plumbing under Occupations Code 1301.002, so expect a licensed plumber to do it. Florida plumbing contractors' scope under Statute 489.105 also covers natural gas and propane lines.

Propane (much of Florida and rural Texas)

Without a gas main, you need a tank. Manufacturer B's support article (December 2025) says propane tanks supplying its home standby generators must be at least 250 gallons, and that larger tanks may be needed depending on installation, fuel demand or climate. That is one manufacturer's specification, not a law. Your tank choice also controls how long you can run without a delivery; see propane tank size and runtime.

Tank cost depends on whether you lease from a supplier or buy, whether it sits above ground or is buried, and how far it is from the generator. We did not find a named, dated source for tank prices in Texas or Florida, so ask each propane company for a written price for the tank, setting, regulators, piping, first fill and any annual lease fee. In Texas, LP-gas installation work requires a Railroad Commission license; in Florida it requires an FDACS license. See propane tank installation rules.

What do permits and inspections cost in Texas and Florida?

Inch Calculator's 2023 guide says generator permits usually cost $50 to $200. That is a reasonable placeholder, but fees vary by city and by how many permits your job needs (electrical, gas or plumbing, sometimes zoning or a site plan). Look up your city's or county's fee schedule, or ask your installer to list each permit fee as a separate line.

Texas: two 2025 laws change the paperwork

  • S.B. 1252 (2025) bars Texas cities from adopting or enforcing NEC amendments or other local rules that regulate the installation or inspection of a "residential energy backup system" (up to 50 kW, or up to 100 kWh of storage). TDLR's August 2025 notice stresses that state licensing still applies: the electrical work must follow Occupations Code chapter 1305 and the National Electrical Code and be done by licensed Texas electrical contractors. Municipally owned utilities such as Austin Energy and CPS Energy keep their own authority in their service areas.
  • S.B. 1202 (2025) added Local Government Code 247.0025, which lets a qualified third party, such as a licensed electrical inspector or a Texas master electrician, review plans and inspect a home backup power installation. The city or county must issue its approval within three business days after notice that the third party approved it. A city or county that has not posted its rules and fee schedule (or provided them within two business days on request) may not charge a fee for approving an installation reviewed this way.

How these laws play out varies by city, so ask your installer how they will handle permits in Houston, Dallas, San Antonio or Austin specifically. Our Texas permits guide goes deeper.

Florida: local permits plus wind and flood review

Florida permits are issued by the city or county building department under the Florida Building Code. In coastal and flood-prone areas, expect the permit office to look at anchoring and elevation. A Florida homeowner may act as their own electrical contractor on a single-family home or duplex for their own use under Statute 489.503(6), but must personally appear and sign the permit application, and anyone they hire must be licensed. Most homeowners leave permits to the contractor. See our Florida permits guide.

Texas HOAs cannot drive up your cost past a limit

Under Texas Property Code 202.019, an HOA rule about where the generator goes is unenforceable if it would raise the cost of installing the generator by more than 10%, or the cost of installing and connecting the electrical and fuel lines by more than 20%. If your HOA asks you to move the unit to the far side of the lot, price both locations. See Texas HOA generator rules.

Florida cost factors: wind, flood elevation and propane

Florida installs often cost more than the same job inland for three reasons.

  1. Flood elevation. Manufacturer B's site instructions say to pick high ground where water will not rise and flood the generator, and that the unit should not operate in or be subjected to standing water. In low coastal lots, that can mean a raised platform or stand, longer conduit runs and extra anchoring. Homeyou notes that homes in flood-prone areas may prioritize elevated installations.
  2. Wind anchoring and engineering. Some Florida permit offices ask for anchoring details or a signed engineering letter for equipment exposed to hurricane winds. Requirements and fees vary, and we did not find a dated statewide cost figure. Ask the building department in Miami-Dade, Broward, Hillsborough, Orange or Duval County (or your city) what it needs before you collect quotes, so every bidder prices the same thing.
  3. Propane. Where no gas main exists, a tank, regulators and piping are part of the job. Florida's residential propane price was $5.167 a gallon the week of November 16, 2026 according to EIA, well above the U.S. average of $2.817, which raises your running cost too.

Florida homeowners should also know that FPL says homeowners own and must repair the equipment attached to the house (service stack, attachment hardware, riser and meter box) after storm damage before FPL can restore service. A generator does not fix that damage, but it can keep the house running while the repair is scheduled. See our Florida hurricane generator guide and flood zone and wind anchoring guide.

City guides: Miami, Tampa, Orlando, Jacksonville.

Texas cost factors: long gas runs, freeze loads and HOAs

Many Texas suburban homes have natural gas, which keeps fuel infrastructure cheaper than a propane tank. The expensive part is often the distance. On a large lot, the gas meter may be on one side of the house and the electric meter on the other, and the only place the HOA or the side setback allows the generator is the back corner. Every extra foot of pipe and conduit, plus each elbow, adds labor and can force a larger pipe size.

Texas also has a winter sizing problem. During Winter Storm Uri in February 2021, more than 4.5 million people in Texas lost power, some for as long as four days, according to the FERC-NERC report. Homes with heat pumps and electric resistance "heat strips" need far more generator capacity to heat in a freeze than to cool in summer. If you want heat in a Uri-type event, size for February, not just August, and price the bigger unit or load management. See generators for AC, heat pumps and heat strips.

Finally, the S.B. 1252 and S.B. 1202 changes described above can reduce local permit friction, but state licensing still applies. A bid that is far below others because the installer says "no permit or license is needed now" is a red flag, not a bargain.

City guides: Houston, Dallas, San Antonio, Austin.

What do electricians earn in each city, and how does that affect your quote?

Labor is a large share of every install. Hourly wages are not what a contractor bills you (billing rates include overhead, insurance, trucks and profit), but they show how local labor markets compare. These are median wages for electricians from Bureau of Labor Statistics 2025 data, as published by O*NET.

Metro areaMedian hourlyMedian annual
Austin-Round Rock-San Marcos$29.03$60,390
Houston-Pasadena-The Woodlands$28.45$59,180
Dallas-Fort Worth-Arlington$28.37$59,010
San Antonio-New Braunfels$27.41$57,010
Miami-Fort Lauderdale-West Palm Beach$28.19$58,630
Jacksonville$28.02$58,280
Tampa-St. Petersburg-Clearwater$27.62$57,450
Orlando-Kissimmee-Sanford$24.43$50,820
United States$30.38$63,190

Statewide, BLS counted 76,770 electricians in Texas and 49,700 in Florida in May 2025, with median pay of $58,570 and $57,250 a year. Both states sit below the national median, which is consistent with Homeyou's finding that the South is its lowest-cost region. Inch Calculator's 2023 guide put electrician billing at $50 to $200 an hour, but says most generator jobs are quoted as a flat price.

A generator job also needs a gas plumber or licensed LP-gas installer. BLS 2025 data put median plumber pay at $59,840 a year in Texas and $52,910 in Florida.

How much does it cost to run a standby generator per hour and per day?

Running cost is fuel plus wear. To estimate fuel, we combined one manufacturer's published fuel use with government fuel prices. These are our calculations, not figures any manufacturer or agency publishes, and your cost will differ with load, weather, unit and your actual gas rate.

Inputs: Manufacturer A's residential manual lists its 14 kW and 20 kW units' fuel use at 50% and 100% load. Manufacturer A gives 36.39 cubic feet of propane vapor per gallon, which we used to convert. For prices we used EIA's 2025 average residential natural gas price (Texas $19.42 and Florida $25.48 per thousand cubic feet) and EIA's residential propane price for the week of November 16, 2026 (Texas $3.209 and Florida $5.167 a gallon).

Unit and loadNatural gas useNatural gas cost per hour (TX / FL)Propane usePropane cost per hour (TX / FL)
14 kW at 50%124 cu ft/hr$2.41 / $3.16about 1.65 gal/hr$5.29 / $8.52
14 kW at 100%193 cu ft/hr$3.75 / $4.92about 2.23 gal/hr$7.14 / $11.50
20 kW at 50%161 cu ft/hr$3.13 / $4.10about 2.25 gal/hr$7.23 / $11.64
20 kW at 100%281 cu ft/hr$5.46 / $7.16about 3.74 gal/hr$11.99 / $19.31

Running a 20 kW unit at half load around the clock works out (our calculation) to roughly $75 a day on Texas natural gas, $98 on Florida natural gas, $174 on Texas propane and $279 on Florida propane. For comparison, Inch Calculator's 2023 guide estimated $25 to $50 a day for a natural gas standby unit. The difference partly reflects higher gas prices since then and partly that EIA's average residential price includes fixed monthly charges spread over every unit sold, so your extra cost per cubic foot may be lower than the average. Check the per-unit rate on your own gas bill to refine the number.

Real loads swing. A home in Tampa with two ACs cycling in August may average well above 50% of a 20 kW unit, while the same home at night with one AC running may sit near 25%. Our runtime and fuel consumption guide goes further.

The weekly exercise cost

Standby units run themselves briefly to stay healthy. Manufacturer A says weekly or every-two-week exercise is required and that its default unloaded exercise runs 20 minutes. Inch Calculator estimated exercise fuel at about $5 to $10 a month in 2023. That cost is small, but on propane it slowly draws down your tank between fills.

What does yearly maintenance cost?

Homeyou's 2026 guide lists backup generator maintenance visits at $186 to $568, averaging $316, and generator battery replacement at $216 to $568. Maintenance intervals come from the manufacturer. Manufacturer A's schedule for its 14 kW units, for example, calls for an oil change yearly or every 100 hours and spark plugs yearly or every 300 hours; its 20 kW units call for oil and filter yearly or every 150 hours. A long outage can trigger a service visit sooner: a 10-day hurricane outage at 24 hours a day is 240 run hours.

Budget for one visit a year, a battery every few years and an extra oil change after any long outage. Some installers sell multi-year service plans. Compare the plan price with the cost of individual visits and read what parts and travel are included. See our maintenance and exercise schedule guide and warranty guide, since skipping required maintenance can affect warranty coverage.

Are generator prices higher after a hurricane or winter storm? Is the off-season cheaper?

Homeyou's 2026 seasonal table shows a pattern most installers will confirm:

Timing (Homeyou, 2026)Typical range
Spring$6,847 to $13,704
Autumn$7,158 to $14,307
Summer$7,279 to $14,649
Winter$7,400 to $14,965
Peak season$8,304 to $16,557
Emergency or rush$9,228 to $17,768

The differences are not huge between ordinary seasons, but rush work costs more because of after-hours labor, expedited equipment and overtime. Homeyou says after-hours installs commonly average around $11,735 and same-day standby work closer to $13,302.

Demand spikes follow big outages. In Texas, Winter Storm Uri (February 2021) left more than 4.5 million people without power, and Hurricane Beryl (July 2024) disrupted service for 2.7 million customers, including 2.2 million CenterPoint customers in the Houston area, according to the Public Utility Commission's Beryl report. In Florida, Duke Energy said its Hurricane Milton outages fell from over 1 million to about 3,000 by October 17, 2024. We did not find dealer statements or primary data that put a dollar figure on price increases after Uri, Ian, Beryl or Milton, so we do not publish one. What is clear is that lead times stretch and rush premiums apply. See supply and lead times after storms.

If you can, get quotes in late fall or winter in Florida and in spring or fall in Texas, well before the season you are worried about. Remember that permits, utility meter changes and inspections can add weeks to a job that takes one to three days on site.

Price gouging laws apply to some sales during declared emergencies. See generator price gouging laws.

Is a portable generator with an inlet a reasonable cheaper alternative?

For many households it is. Homeyou's 2026 range for hooking a portable generator to selected circuits through a transfer switch is $990 to $2,909 (average $1,693), plus the portable generator itself. You get safe power to a few circuits without the cost of a pad, gas line and standby unit.

The trade-offs are real:

  • You must be home to start it, refuel it and shut it down. If you travel or have medical needs, that matters.
  • Gasoline storage is limited and hard to buy after a storm. See generator fuel storage.
  • Most portable units cannot start a central AC compressor without help.
  • Carbon monoxide risk is far higher with portable units run near the home. CDC advises running a generator outdoors more than 20 feet from windows, doors and vents.

Never connect a portable generator by plugging it into a wall outlet. CPSC warns this "backfeeding" can electrocute utility workers and neighbors. Use a transfer switch or a listed interlock installed by a licensed electrician. See inlets and interlocks and generator vs battery backup.

What about removing an old generator or powering a small business?

Removal and replacement

We found no named, dated source that prices removal of an old standby unit by itself. Replacement can be cheaper than a first install if the pad, gas line, conduit and transfer switch can be reused, or more expensive if the new unit is larger and the old fuel line or switch is too small. Ask the installer to price removal, haul-away and each reused or replaced component separately, and to confirm the existing transfer switch is compatible with the new generator's controller. See generator lifespan and replacement.

Commercial and small business

Commercial jobs are priced differently: three-phase power, larger liquid-cooled units, engineered drawings and commercial permits. We did not find a dated, named cost source for small-business generators that we could verify, so we leave out a range. See our small business generator guide and commercial generator codes.

What a fair itemized quote looks like, and red flags

A fair quote reads like a plan you could hand to an inspector. It should list:

  • The exact generator model number and its kW rating on natural gas and on propane.
  • The transfer switch model, amperage and type (service-rated whole house, or essential-circuit), and any load management modules with what each one controls.
  • The written load calculation, including starting load for the largest AC or pump.
  • The generator location on a sketch, with distances to windows, doors and vents and to the property line.
  • Length and size of gas pipe and electrical conduit, and whether trenching or boring is included.
  • Who coordinates the gas meter or propane tank, and what that costs.
  • Each permit and inspection fee, and who pulls the permits.
  • Pad or stand type, anchoring, and in Florida any elevation or engineering item.
  • Startup, load test, warranty registration and owner training.
  • First service visit and its price, plus labor warranty terms.
  • License numbers for the electrical contractor and the gas or LP-gas installer.

Red flags

  • A total price with no breakdown, or "plus fuel hookup TBD."
  • No load calculation, or a size picked only from square footage.
  • Pressure to sign during an outage, or a large cash deposit before permits are pulled.
  • Claims that no permit or license is needed in Texas after S.B. 1252. TDLR says licensed electrical work is still required.
  • Placement right next to a bedroom window or in a spot that floods.
  • No mention of who handles the gas utility or propane company.

Look up licenses: TDLR for Texas electricians, the Texas Railroad Commission for LP-gas, the Texas State Board of Plumbing Examiners for gas plumbing, Florida DBPR for electrical and plumbing contractors, and FDACS for Florida LP-gas installers. See generator scams and storm chasers.

Does a generator add value to a home?

Homeyou's 2026 guide offers rough return-on-investment ranges that it calls "rough and illustrative": 60 to 75% for a standby whole-house generator, 65 to 80% for a natural gas standby unit and around 40 to 50% for a portable generator installation. Treat those as one cost guide's estimate, not appraisal data. A permitted, documented, maintained system is more likely to count with buyers than an unpermitted one. For insurance discounts and resale questions, see generator insurance discounts and home value. For sales-tax questions, see generator taxes and sales tax holidays.

The better question for most Texas and Florida households is what an outage costs you. A week without AC in August, spoiled food, a hotel stay, a flooded room from a failed sump pump, or a medical device without power all have a price. Weigh the installed cost against your outage history, health needs and how long you plan to stay in the home.

How to choose a provider

  • Decide what you need powered (essential circuits, managed whole house, or every circuit) before you call anyone.
  • Ask each bidder for a written load calculation and the kW rating on your fuel (natural gas or propane), not the brochure number.
  • Get at least three itemized quotes that split the unit, transfer switch, pad, electrical labor, gas or propane work, trenching, permits and startup.
  • Call your gas utility (Texas) or propane supplier (Florida and rural Texas) and confirm meter size, pressure and any upgrade fee in writing.
  • Check your city or county permit fee schedule and whether your installer or a third-party inspector will handle inspections.
  • In Florida coastal or flood zones, ask whether the bid includes an elevated stand, anchoring and any engineering letter the permit office requires.
  • In a Texas HOA, check Property Code 202.019 limits before accepting a location that adds cost.
  • Confirm who registers the warranty and what the first-year maintenance visit costs.
  • Ask for the electrician's and gas installer's license numbers and look them up with TDLR, the Texas Railroad Commission, Florida DBPR or FDACS.
  • Schedule outside peak storm season if you can, and never sign a rush contract during an outage without a written itemized price.

Related standby generator installation guides

Standby generator installation by state and city

Questions people ask

How much does a 22 kW standby generator cost with installation?

We could not verify a current list price for a specific 22 kW model, so check each quote's unit line. For context, Homeyou's September 2026 guide puts a standby generator with an automatic transfer switch at $7,882 to $15,050 installed, averaging $10,941, and systems that power every circuit at $12,041 to $22,586. Most 22 kW quotes fall within those bands. Ask whether gas piping, trenching, a propane tank and permits are included, since those are often separate.

How much does the automatic transfer switch add?

Homeyou's 2026 guide lists transfer switch installation at $829 to $2,652 and an automatic transfer switch upgrade at $1,291 to $4,315, averaging $2,396. Price depends on amperage, whether the switch is service rated for the whole house, how many circuits are moved and whether load management modules are added. Many standby generators are sold with a matching switch, so ask whether yours is included in the unit price or billed separately.

Do I need a concrete pad, and what does it cost?

The generator needs a level, stable base that meets the manufacturer's specifications. Many units ship with a composite pad; some installers pour concrete. Manufacturer A, for example, says not to mount its composite pad on grass, wood or other combustibles. When billed separately, Homeyou's 2026 guide lists a concrete pad at $588 to $1,994. In Florida flood zones, an elevated stand may replace a ground pad.

How much does it cost to run a standby generator for a day?

Using one manufacturer's fuel data and EIA prices, our calculation puts a 20 kW unit at half load near $75 a day on Texas natural gas, $98 on Florida natural gas, $174 on Texas propane and $279 on Florida propane. Inch Calculator's 2023 estimate for natural gas was $25 to $50 a day. Actual cost depends on your load and your utility's per-unit rate, so check your gas bill or propane contract.

Why is my propane generator so much more expensive to run in Florida?

Propane prices. EIA reported Florida residential propane at $5.167 a gallon the week of November 16, 2026, compared with $3.209 in Texas and a U.S. average of $2.817. A generator also burns more gallons per hour than many people expect: one manufacturer's 20 kW unit uses about 2.3 gallons an hour at half load by our conversion. Keeping your tank full before hurricane season and comparing supplier prices both help.

Is it cheaper to install a generator in the off-season?

Usually a little, and the scheduling is far easier. Homeyou's 2026 table lists spring installs at $6,847 to $13,704 versus $8,304 to $16,557 in peak season and $9,228 to $17,768 for emergency or rush work. Permits, utility meter changes and equipment delivery can take weeks, so starting in the off-season is the best way to avoid paying rush prices when a storm is coming.

Can my HOA make me put the generator somewhere more expensive?

In Texas, there is a limit. Property Code 202.019 makes an HOA location requirement unenforceable if it raises the cost of installing the generator by more than 10% or the cost of installing and connecting the electrical and fuel lines by more than 20%. Florida law protects certain fuel sources and appliances in HOA documents but has no matching cost cap. This is general information; read your association documents and talk to an attorney for a specific dispute.

What hidden costs show up on generator installs?

Homeyou lists the common surprises as panel upgrades, relocating or adding gas or propane lines, trenching for conduit, concrete pads, noise or setback fixes required by code, extra permits and repeat inspections. Older homes may also need wiring or grounding corrections that only show up once the panel is opened. A gas meter or regulator change by your utility is another frequent add. Ask each bidder to list these as priced lines or as written exclusions.

Is a smaller essential-circuits generator worth the savings?

It can be. Homeyou's 2026 guide puts essential-circuits backup at $4,205 to $7,932, against $12,041 to $22,586 for whole-home systems. The catch in Texas and Florida is air conditioning: if you want cooling, the generator must be large enough to start a compressor. A mid-size unit with load management is often the middle ground. Our whole-house vs essential circuits guide compares the options.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration