Local Guide · Residential solar installers
Before You Go Solar: Efficiency Upgrades That Shrink the System You Need
Every kWh you cut before going solar removes panels from the design. Here is the math, the free audits Texas and Florida utilities offer, and the upgrades that usually pay best in hot climates.
Yes, improve efficiency first in most Texas and Florida homes. Solar is sized to your yearly use, and at 2026 average prices each 1,000 kWh a year of solar costs roughly $1,350 to $1,600. Air sealing, attic insulation, duct sealing and a better pool pump often save power for less. Get a free utility survey or a certified audit, make the cheap fixes, then size solar to your new, lower use.
Key facts
- OUC (Orlando) says making a home efficient before solar may allow a smaller PV system and recommends a free energy audit first.
- Florida Statute 366.82(11) requires covered utilities to offer or contract to offer energy audits to residential customers.
- FPL's Home Energy Survey is free and can be scheduled at 1-800-DIAL-FPL (1-800-342-5375).
- Texas Utilities Code 39.905 requires utilities to fund efficiency incentives each year through standard offer or market-transformation programs.
- Austin's ECAD ordinance (City Code Chapter 6-7) requires an energy audit or qualifying program participation before the sale of most homes 10 years or older.
- The DOE says a professional home energy assessment costs about $250 to $600 or more.
- ENERGY STAR says sealing and insulating can save up to 10% on annual energy bills.
- ENERGY STAR: halving pool pump speed uses one-eighth the energy; a pool pump can cost up to $310 a year to run.
- The IRS says the 25C efficiency credit ended for property placed in service after December 31, 2025, and the 25D solar credit ended for systems whose installation is completed after that date.
- PVWatts models 1,421 kWh per kW per year in Houston and 1,568 in Tampa (south-facing, 20 degree tilt).
Should you make your home more efficient before going solar?
Usually, yes. Solar is sized to the electricity your home uses. If you cut that use first, you need fewer panels, and a smaller system costs less. Orlando's city utility, OUC, says it plainly: making your home as efficient as possible before installing solar "may allow you to purchase a smaller solar PV system and save on costs," and it suggests starting with a free energy audit.
The order matters more in Texas and Florida than in many places for two reasons.
- Cooling drives your bill. In hot, humid climates, air conditioning runs most of the year. Leaky ducts, thin attic insulation and old AC units waste a large share of that power, and solar would just be paying for the waste.
- Extra solar power is worth less than the power you use. Florida's big utilities pay for leftover yearly credits at a low "as-available" rate under PSC Rule 25-6.065, not at retail. Most Texas buyback plans pay less than retail too, according to the PUC Texas consumer guide. If you size solar to today's wasteful use and then fix the house later, the extra power the panels make after the fix earns much less.
There is one more 2026 reason. The federal tax credits that used to cover part of both solar (25D) and efficiency upgrades (25C) ended after December 31, 2025, according to the IRS (25C for property placed in service after that date, 25D for systems whose installation is completed after it). Neither project gets a federal credit now, so the cheaper path to the same comfort wins on its own merits.
This page shows how to find the waste, which upgrades usually pay best in hot climates, what free help your utility offers, and how to turn saved kWh into a smaller, cheaper solar design. For the full solar decision, see is solar worth it in Texas? and is solar worth it in Florida?.
The load reduction math: how many panels does efficiency remove?
You can do this with two numbers: how much electricity a typical 1 kW of panels makes in a year where you live, and the price per watt in your state.
Step 1: kW of solar avoided = kWh saved per year / kWh made per kW per year.
Step 2: Dollars of solar avoided = kW avoided x price per watt x 1,000.
The PVWatts model (run by the national lab now called the National Laboratory of the Rockies) estimates the yearly output of 1 kW of south-facing panels at a 20 degree tilt with standard losses. EnergySage's November 2026 state pages list average installed prices of $2.26 per watt in Texas and $2.12 per watt in Florida, before incentives.
| City | PVWatts kWh per kW per year | Panels avoided by saving 1,000 kWh/yr | Approximate solar cost avoided |
|---|---|---|---|
| Houston | 1,421 | 0.70 kW | About $1,590 (at $2.26/W) |
| Dallas | 1,506 | 0.66 kW | About $1,500 (at $2.26/W) |
| Austin | 1,483 | 0.67 kW | About $1,520 (at $2.26/W) |
| San Antonio | 1,497 | 0.67 kW | About $1,510 (at $2.26/W) |
| Miami | 1,552 | 0.64 kW | About $1,370 (at $2.12/W) |
| Tampa | 1,568 | 0.64 kW | About $1,350 (at $2.12/W) |
| Orlando | 1,544 | 0.65 kW | About $1,370 (at $2.12/W) |
| Jacksonville | 1,455 | 0.69 kW | About $1,460 (at $2.12/W) |
So, as a rule of thumb, every 1,000 kWh a year you cut before going solar saves roughly $1,350 to $1,600 in solar equipment at 2026 average prices. If an efficiency upgrade costs less than that per 1,000 kWh it saves, it is the cheaper way to cut your bill. These are model and average-price figures, not quotes for your home. Your roof direction, shade and the actual price you are quoted will move them.
A worked example
Say a Houston family uses 16,000 kWh a year. An energy audit finds leaky ducts and thin attic insulation, and the family also swaps a single-speed pool pump. Together, the fixes cut use by 2,500 kWh a year (an example figure; your audit report gives your own).
- Before: 16,000 / 1,421 = 11.3 kW of solar to cover 100% of use.
- After: 13,500 / 1,421 = 9.5 kW.
- Difference: 1.8 kW, or about $4,000 at $2.26 per watt.
If the upgrades cost less than about $4,000, the family comes out ahead before counting the comfort gains. If they cost more, they may still be worth it, but the math is closer. Learn how sizing works in what size solar system do I need? and how to judge the final number in solar payback math.
What is a home energy audit?
A home energy audit (the U.S. Department of Energy also calls it a home energy assessment) is a check of where your house uses and loses energy. The DOE consumer guide describes two levels.
Do-it-yourself walk-through
You walk the house looking for air leaks where different materials meet: between the foundation and walls, around outlets and switch plates, windows and door frames, baseboards, attic hatches, window AC units, and where pipes, wires and vents go through walls. You check caulk and weather stripping. The DOE guide also describes a simple test: close windows and doors, turn on exhaust fans, and pass a lit incense stick around likely leak spots. If the smoke is pulled in or blown out, you found a leak. Safety note from the guide: turn off gas-burning appliances such as furnaces and water heaters before running this test, or skip that step.
Professional audit
A professional uses equipment to measure leaks and heat loss:
- Blower door test: a powerful fan in a doorway lowers the pressure in the house so outside air rushes in through gaps. A calibrated blower door with a pressure gauge (manometer) measures how leaky the house is, not just where the leaks are.
- Infrared (thermographic) scan: a camera shows warm and cool spots in walls, ceilings and around windows. Done during a blower door test, leaks show up as dark streaks.
- Duct blower: a fan attached to your duct system measures how much cooled air leaks out of the ducts.
- The assessor may also check your heating and cooling system, test for gas leaks and check ventilation.
The DOE guide says a professional assessment costs from about $250 to $600 or more, and that many contractors charge less if you hire them for the upgrades. It recommends using a certified assessor and suggests asking your electric or gas utility, or your state or local energy or weatherization office, to find one. Austin Energy, for its own required audits, accepts RESNET-certified raters and BPI Building Analyst professionals, which gives you a good benchmark for credentials anywhere.
How to prepare
- Pull 12 months of bills or usage data from your utility account.
- List problems you have noticed: hot rooms, condensation, musty smells, high summer bills.
- Write down the age and model of your AC, water heater and pool pump.
- Ask for a written report that estimates the yearly kWh savings of each recommended fix. You need those kWh numbers for the solar math above.
Do Florida utilities offer free energy audits?
In most of Florida, yes, because state law requires it. Under the Florida Energy Efficiency and Conservation Act, section 366.82(11) says the Public Service Commission "shall require each utility to offer, or to contract to offer, energy audits to its residential customers." The statute's definition of "utility" excludes some smaller co-ops and municipal systems, so a small city utility may not be covered. The PSC also sets efficiency goals for the utilities it oversees (s. 366.82(2)).
| Utility | What it offers (as published) | How to start |
|---|---|---|
| FPL | A free Home Energy Survey in which an FPL energy expert reviews your use, suggests improvements and reviews programs and incentives that may apply. FPL also offers an online Energy Manager tool. | Call 1-800-DIAL-FPL (1-800-342-5375) or use your FPL online account |
| OUC (Orlando) | A free home energy audit; OUC's solar page recommends one before you install solar | Call (407) 423-9018 or use OUC's online audit request |
| Duke Energy Florida, Tampa Electric, JEA and co-ops | Check each utility's energy savings page for its current audit or "energy check" program | Your utility account or customer service line |
A utility survey is a good first step and costs nothing. It is often lighter than a full blower door audit, so if your house has comfort problems or very high bills, a paid professional audit may find more. Either way, ask the auditor which fixes would save the most kWh in summer, since that is when Florida homes use the most power.
For how Florida's utilities treat solar after you install, see Florida utility solar rules and Florida net metering.
Do Texas utilities offer free energy audits or efficiency programs?
Texas works differently because, in most of the state, the company that delivers your power (the TDU, such as Oncor, CenterPoint, AEP Texas or TNMP) is not the company you pay for electricity.
TDU efficiency programs in competitive areas
Texas Utilities Code section 39.905 sets an energy efficiency goal for electric utilities. Each utility must provide incentives every year, through "market-based standard offer programs or through targeted market-transformation programs," so that retail electric providers and energy service providers can deliver efficiency to homes and businesses. In plain English: the TDU funds the program, but the work is usually done by participating contractors who apply for the incentive and pass it on to you as a lower price. The law says the rules should encourage the value of the incentive "to be passed on to the end-use customer."
What that means for you:
- Ask any insulation, duct-sealing or AC contractor whether it participates in your TDU's efficiency program and how much incentive is included in the quote.
- Check your TDU's website (Oncor, CenterPoint, AEP Texas or TNMP) for its current residential programs and list of participating contractors. Programs and budgets change each year.
- Retail electric providers in ERCOT must give customers efficiency educational materials under the same section, so your REP may also have tools or offers.
City-owned utilities
- Austin Energy runs its own efficiency programs. Austin's Energy Conservation Audit and Disclosure (ECAD) ordinance, in Chapter 6-7 of the City Code, requires sellers of homes 10 years old or older in Austin Energy's area and city limits to have an energy audit by a qualified ECAD Energy Professional, or to show participation in a qualifying program such as Home Energy Savings or Weatherization Assistance, and to share the results with buyers. If you are buying in Austin, ask for that report. It is a free head start on your efficiency list.
- CPS Energy in San Antonio lists home efficiency rebates and weatherization help on its website. Check current terms with CPS.
- Co-ops set their own programs. Call yours.
Low-income help in both states
The DOE Weatherization Assistance Program gives states money to help low-income families weatherize their homes, and the DOE guide notes other incentives may be available to lower-income households. Contact your state or local weatherization office. For more on Texas solar rules after you install, see Texas utility solar programs and Texas solar buyback plans.
Which efficiency upgrades pay off best in hot climates?
Every house is different, which is why the audit comes first. But in Texas and Florida the usual order of value looks like this.
1. Air sealing and attic insulation
ENERGY STAR says sealing and insulating can provide up to a 10% savings on your annual energy bills. In a hot climate, the attic is where most summer heat enters, and gaps around light fixtures, the attic hatch and plumbing let hot attic air into the house. This is often the cheapest upgrade per kWh saved. ENERGY STAR also warns that not every insulation is designed for every part of the house, so match the product to the spot.
2. Duct sealing
Many Texas and Florida homes have ducts in a hot attic. Leaks there blow cooled air into the attic and pull hot, humid attic air into the system. A duct blower test during the audit shows how bad it is.
3. The air conditioner itself
An AC's SEER rating is cooling delivered per unit of electricity. That makes the math simple: a unit with a higher rating uses less power for the same cooling, in proportion to the ratio of the two ratings. Going from an old 10 SEER unit to a 15 SEER unit means the new one uses about 10 / 15, or two-thirds, of the power for the same cooling, a one-third cut. If the old unit used 6,000 kWh a year (an example; your audit or a utility usage breakdown gives your number), the new one would use about 4,000 kWh. That 2,000 kWh saved removes about 1.4 kW of panels in Houston (2,000 / 1,421) or 1.3 kW in Tampa (2,000 / 1,568). Make sure the contractor sizes the new unit with a load calculation, because sealing and insulation first may let you buy a smaller one.
4. Pool pumps
ENERGY STAR says a pool pump can be a home's second largest energy user, costing as much as $310 a year. Its figures: certified in-ground pumps use 20% less energy than standard pumps and save about $50 a year; cutting pump speed in half uses one-eighth as much energy; and running the filter 6 hours a day instead of 24 cuts its energy use by 75%. Cleaners matter too: ENERGY STAR estimates a robotic cleaner uses about 197 kWh a year, compared with 1,675 kWh for a cleaner powered by the filter pump and 2,989 kWh for one driven by a booster pump. Swapping a booster-pump cleaner for a robot saves about 2,800 kWh a year, close to 2 kW of panels in Houston. If you have a pool, fix the pump before you size solar.
5. Thermostat settings and smart thermostats
ENERGY STAR says heating and cooling cost the average American household more than $900 a year, and it certifies smart thermostats based on actual field data showing savings. A smart thermostat also helps solar owners in a special way, explained below.
6. Cool roofs and radiant barriers
A reflective roof or an attic radiant barrier can cut attic heat. The UCF Florida Solar Energy Center's consumer solar guide uses an example home whose roof was replaced with a reflective metal roof, which helped cut its energy use. Savings depend on your attic, ducts and insulation, so ask the auditor to estimate kWh before you pay for one. If you plan a new roof anyway, do it before solar. See should you replace your roof before solar? and solar on tile, metal and shingle roofs.
Do smart thermostats help with solar?
They can, and how much depends on your export rule.
| Your setup | Does shifting AC use into sunny hours help? | Why |
|---|---|---|
| Texas REP buyback plan below retail | Yes | Power you use the moment it is made saves your full retail rate. Power you export earns only the buyback rate. Pre-cooling the house in the early afternoon uses more of your own solar. |
| Austin Energy Value of Solar | Not for the solar credit | Austin credits 100% of what your panels make at 12.89 cents per kWh and bills all use at standard rates, so timing does not change the solar credit. It can still lower total use. |
| Florida IOU net metering (FPL, Duke, TECO) | Little effect on the solar credit | Exports offset use at about retail within the month, so timing within the month matters less. Cutting total use still matters. |
| JEA (Jacksonville) | Yes | JEA credits exports at its fuel rate, not retail, so using your own solar during the day is worth more. |
| OUC systems on the post-July 2025 rate | Yes | Newer OUC customers get a lower export rate, so self-use is worth more. |
The same logic applies to pool pumps and water heaters on timers: in Texas and Jacksonville, run them in the middle of the day. If you add a battery later, it does the same job by storing midday power for the evening. See home battery sizing.
Is attic insulation or solar better first?
For most homes, insulation and air sealing come first, for three reasons.
- Cost per kWh. Using the table above, solar costs roughly $1,350 to $1,600 per 1,000 kWh of yearly output at 2026 average prices. Air sealing and insulation that save 1,000 kWh a year often cost less than that. Get your own quotes to confirm.
- Comfort. Solar lowers your bill but does nothing for a hot upstairs bedroom. Insulation and duct sealing do both.
- Timing. Insulation is a one-day job that does not need utility approval. Solar takes permits, inspection and permission to operate. See interconnection and permission to operate.
The exception: if your roof is about to be replaced, coordinate. Some insulation and radiant barrier work is easier with the roof off, and solar should go on after the new roof. If you are building a new home, many of these choices are made by the builder. See solar on new-construction homes.
A sequencing plan: what to do in what order
| Step | What to do | Why now |
|---|---|---|
| 1 | Download 12 months of usage from your utility account | Baseline for both the audit and the solar design |
| 2 | Get a free utility survey (Florida) or ask your TDU about its programs (Texas); hire a certified auditor if you have comfort problems | Find the cheap savings |
| 3 | Do air sealing, attic insulation and duct sealing | Usually the lowest cost per kWh saved |
| 4 | Replace a failing AC or single-speed pool pump, sized after steps 3 | Better envelope may allow smaller equipment |
| 5 | Decide on big future loads: EV, heat pump water heater, pool, home addition | These add kWh; size solar for where your use is headed |
| 6 | Live with the changes for a few months, or have the auditor estimate new yearly use | Gives the installer a realistic target |
| 7 | Get at least three solar quotes based on the new usage number | Avoid paying for panels you no longer need |
Step 5 matters. Efficiency lowers use, but an electric vehicle or other new loads raise it. Plan for both. See charging an EV with home solar and solar pool and water heating.
How to tell an installer about your efficiency plans
Solar proposals usually size the system from your last 12 months of bills. If you have just made big efficiency changes, those bills overstate your future use. Tell the installer what changed and give them the auditor's savings estimate. Ask them to show the system size and production at both your old and new usage.
Watch for the opposite problem too. Some sellers add "efficiency" items to a solar contract, such as attic fans, insulation or smart devices, without showing what each costs or saves. The U.S. Treasury consumer advisory on solar recommends getting an independent energy audit and comparing several itemized quotes. In Texas, Business and Commerce Code chapter 115 requires solar sellers to give a written description and cost of all equipment and a detailed accounting of fees, and TDLR says all costs must be itemized on the consumer disclosure form. Use those lines to price each add-on separately and compare it with a quote from an independent contractor.
See how to read a solar proposal and how to choose a solar installer.
Do utility rebates for efficiency still exist in 2026?
Federal tax credits for efficiency upgrades are gone for 2026: the IRS says the Energy Efficient Home Improvement Credit (25C) is not allowed for property placed in service after December 31, 2025. Utility and state-funded programs are separate and continue:
- Florida: utilities covered by s. 366.82 must offer residential energy audits, and the PSC sets their efficiency goals. Ask your utility which rebates are open this year.
- Texas: TDUs in competitive areas must fund efficiency incentives each year under Utilities Code 39.905, delivered through participating contractors. Austin Energy and CPS Energy run their own programs.
- Low-income households: the DOE Weatherization Assistance Program funds state weatherization services.
Program budgets often run out during the year, so ask early and get the incentive amount in writing on the contractor's quote. For incentives on the solar side, see the federal solar tax credit after 2025 and solar property tax exemptions.
How to choose a provider
- Download 12 months of kWh usage from your utility account.
- Book a free utility survey (FPL, OUC and other covered Florida utilities) or ask your Texas TDU about its efficiency programs.
- Hire a certified auditor (RESNET or BPI) if you have hot rooms or very high bills.
- Ask for the yearly kWh savings of each recommended fix in writing.
- Seal air leaks and bring attic insulation up to the auditor's recommendation.
- Test and seal ducts, especially ducts in the attic.
- Replace a single-speed pool pump and set a shorter filter schedule.
- Size any new AC with a load calculation after the envelope work.
- Decide on future loads (EV, new pool, addition) before sizing solar.
- Give solar installers your new expected usage and ask for designs at old and new use.
- Price any efficiency add-ons in a solar contract separately against independent quotes.
Related residential solar installers guides
- What Size Solar System Do I Need? How Many Panels for a Texas or Florida Home
- How Do You Calculate a Solar Payback Period? Do the Math Yourself
- Roof Direction, Tilt and Shade: Will Solar Work on My House?
- How Do I Read and Compare a Solar Proposal?
- How Big a Home Battery Do You Need? Sizing, Chemistry, Safety Codes and Costs in Texas and Florida
- Solar Pool Heating and Solar Water Heaters in Florida and Texas: Costs, Sizing and Rules
- Should You Replace Your Roof Before Solar? Roof Age, Re-Roofing and Removal Costs
Residential solar installers by state and city
Questions people ask
Should I improve energy efficiency before installing solar?
In most cases, yes. Solar is sized to your yearly kWh use, so every kWh you cut first means fewer panels. At 2026 average prices, each 1,000 kWh a year of solar output costs roughly $1,350 to $1,600 in Texas and Florida. Fixes like air sealing, attic insulation and a better pool pump often save a kWh for less than that. Also, extra solar power that you export is usually worth less than retail, so sizing to wasteful use and fixing the house later wastes money.
What is a home energy audit?
It is a check of where your home uses and loses energy. You can do a simple walk-through yourself, looking for air leaks around windows, doors, outlets and attic hatches. A professional audit uses a blower door to measure air leaks, an infrared camera to find hot and cold spots, and often a duct blower to measure duct leaks. The DOE says a professional audit costs about $250 to $600 or more.
Does FPL offer a free home energy survey?
Yes. FPL says its Home Energy Survey is free. An FPL energy expert reviews how your home uses energy, suggests improvements and reviews programs and incentives that may apply. You can schedule it by calling 1-800-DIAL-FPL (1-800-342-5375). Florida law, s. 366.82(11), requires covered utilities to offer residential energy audits.
Do Texas utilities offer free energy audits?
It depends on your area. In competitive areas, the wires utility (Oncor, CenterPoint, AEP Texas, TNMP) funds efficiency programs under Utilities Code 39.905, usually delivered through participating contractors who include the incentive in their price. Austin Energy and CPS Energy run their own programs. Austin also requires energy audits before the sale of most homes 10 years or older under its ECAD ordinance.
How much does a new AC unit reduce solar size?
It depends on how much power your old unit uses. Because SEER is cooling per unit of electricity, going from 10 SEER to 15 SEER cuts cooling power use by about one-third. If the old unit used 6,000 kWh a year, you would save about 2,000 kWh, which is about 1.4 kW of panels in Houston or 1.3 kW in Tampa, using PVWatts estimates. Seal and insulate first so the new unit can be sized smaller.
Should I replace an old pool pump before sizing solar?
Yes. ENERGY STAR says a pool pump can be a home's second largest energy user. Cutting pump speed in half uses one-eighth the energy, and running the filter 6 hours instead of 24 cuts its use by 75%. A robotic cleaner uses about 197 kWh a year versus 2,989 kWh for a booster-pump cleaner. Fix the pump first so you are not buying panels to run it.
Do smart thermostats help with solar?
They help most where exported power is worth less than retail, such as Texas buyback plans, JEA in Jacksonville and newer OUC customers. Pre-cooling the house during sunny hours uses more of your own solar. In Austin, where all production is credited at the Value of Solar rate, and on Florida IOU net metering, timing matters less, but cutting total use still lowers your bill.
Does a cool roof or radiant barrier reduce solar size?
It can, by cutting attic heat and AC run time, but savings vary with your attic, ducts and insulation. Ask your auditor for a kWh estimate before you buy. If you are replacing the roof anyway, choose the roof and finish any attic work before solar goes on, so you do not pay to remove and reinstall panels later.
Are there federal tax credits for efficiency in 2026?
No. The IRS says the Energy Efficient Home Improvement Credit (25C) is not allowed for property placed in service after December 31, 2025, the same date the 25D solar credit ended for homeowner systems whose installation is completed after 2025. Utility programs in Florida and Texas, and the DOE-funded Weatherization Assistance Program for low-income households, continue separately.
What if I already have solar and then improve efficiency?
You will make more extra power than before. In Florida, that extra power earns monthly credits at about retail on FPL, Duke and TECO, but credits left at year end are paid at a much lower rate. In Texas, extra power earns whatever your buyback plan pays. Adding a new load later, like an EV, can use up the surplus. Review your plan and settings once a year.
Sources
- OUC: How to apply for solar for your home (efficiency FAQ)
- OUC Rooftop Solar Guide (2025)
- Florida Statutes 366.82
- FPL: Home Energy Survey
- Texas Utilities Code chapter 39 (sec. 39.905)
- Austin Energy: ECAD for residential homes
- Austin Energy: Value of Solar rate
- U.S. DOE: Consumer Guide to Home Energy Assessments (2021)
- ENERGY STAR: Seal and insulate
- ENERGY STAR: Smart thermostats
- ENERGY STAR: Pool pumps
- UCF Florida Solar Energy Center: Installing a solar electric system
- IRS: One, Big, Beautiful Bill provisions
- IRS: Residential Clean Energy Credit
- Florida Administrative Code Rule 25-6.065
- PUC Texas Solar Guide for Consumers (March 2026)
- JEA: Distributed generation
- EnergySage: Texas solar cost
- EnergySage: Florida solar cost
- U.S. Treasury solar consumer advisory
- Texas Business and Commerce Code chapter 115
- TDLR: Residential solar retailer knowledge base
- PVWatts v8 Houston run (NLR)
- PVWatts v8 Tampa run (NLR)
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


