New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Fri, Nov 20, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · Roofing

Roofing Glossary: 250 Terms From Your Estimate, Contract, and Insurance Letter

Plain-English definitions of the roofing, building code and insurance terms on your quote, contract or claim letter, including Florida and Texas terms like HVHZ, NOA, SWR, WPI-8 and the 25% rule.

A roofing square is 100 square feet of roof. Pitch, such as 6/12, is inches of rise per 12 inches of run. A valley is where two roof planes meet in an inside angle; a hip is an outside angle. Dry-in means the deck is sealed against rain before the final covering. RCV is replacement cost; ACV is replacement cost minus depreciation. O&P is a general contractor's overhead and profit markup.

Key facts

  • A roofing square is 100 square feet of roof surface.
  • Pitch is written as inches of rise per 12 inches of run; a 6/12 roof has a pitch multiplier of 1.118 (Vertigraph).
  • ASTM D7158 Class D, G and H shingles are rated for 115, 150 and 190 mph basic wind speeds (NRCA).
  • UL 2218 Class 4 is the top impact rating, using a 2-inch steel ball (NRCA; IBHS).
  • Florida's HVHZ sections apply only in Miami-Dade and Broward counties.
  • Florida requires a secondary water barrier and improved deck attachment on every site-built single-family reroof (Fla. Stat. 553.844).
  • Florida measures roof age from the last full replacement to the code then in effect (Fla. Stat. 627.7011).
  • TDI: actual cash value is replacement cost minus depreciation.

How to use this glossary

Roofing estimates, contracts and insurance letters use a language of their own. This glossary defines the terms Texas and Florida homeowners see most, including the state-specific code and insurance terms national glossaries leave out. Terms are grouped alphabetically, and each links to the guide that covers it in depth. Statute and code references point to the 2026 Florida Statutes and current Texas statutes; confirm details with the agency or a professional for your situation.

Roofing terms: A to B

  • Acknowledgment deadline (claims). The time an insurer has to respond after you report a claim. Florida insurers must acknowledge claim communications within 7 calendar days (Fla. Stat. 627.70131). Texas insurers must acknowledge, start investigating and request what they need within 15 days (Tex. Ins. Code 542.055).
  • Actual cash value (ACV). What an insurer pays after subtracting depreciation for age and wear from the replacement cost. TDI's example: a 10-year-old roof costing $10,000 might have an ACV of $7,000. See ACV vs. RCV.
  • Additional living expenses (ALE). Coverage, often called loss of use, that pays reasonable extra costs such as a hotel if a covered loss makes your home unlivable. TDI says most policies cover some of these costs and advises keeping receipts.
  • Adjuster. The person who inspects damage and estimates a claim. A company adjuster works for the insurer; a public adjuster is licensed to represent the policyholder for a fee.
  • Aerial measurement report. A roof measurement made from aerial or satellite images, listing each plane's area and pitch plus ridge, hip, valley, rake and eave lengths. See how to measure a roof.
  • Algae streaks. Dark streaks on shingles in humid climates, usually cosmetic. Many shingles include algae-resistant granules.
  • All other perils (AOP) deductible. The deductible that applies to claims other than wind and hail (or hurricane). Texas policies often split the two. The Texas FAIR Plan offers all-other-perils deductible options of 1% to 5%.
  • Alligatoring. A cracked, scaly pattern on aging flat-roof surfaces or coatings that looks like alligator skin and signals the material is drying out.
  • Appraisal (insurance). A policy process for disputes over the amount of a loss, not coverage. Each side picks an appraiser, the two pick an umpire, and the umpire's decision is binding (TDI).
  • Apron flashing. A one-piece flashing along the downhill side of a chimney, skylight or wall where it meets the roof. It laps over the shingles below so water runs off.
  • Architectural shingle. A thicker, multi-layer asphalt shingle (also called laminated or dimensional) with a shadowed look. Heavier than three-tab.
  • ASCE 7. The national standard for structural loads, including wind. The Florida Building Code uses ASCE 7-22 for wind design.
  • Asphalt shingle. The most common U.S. roof covering: a fiberglass mat coated with asphalt and topped with mineral granules. The base product standard is ASTM D3462.
  • Assignment of benefits (AOB). Signing your insurance claim rights over to a contractor. Florida bans post-loss AOBs on residential and commercial property policies issued on or after January 1, 2023 (Fla. Stat. 627.7152). See Florida's AOB ban.
  • ASTM D1970. The standard for self-adhering polymer-modified bitumen underlayment, the peel-and-stick membrane used as a secondary water barrier. FORTIFIED requires full-deck membranes and 4-inch deck seam tape to meet it (or AAMA 711 Level 3 for 3-3/4-inch tape).
  • ASTM D226 and ASTM D4869. Standards for asphalt-saturated organic felt underlayment. FORTIFIED treats ASTM D226 Type II or ASTM D4869 Type III or IV as the equivalent of #30 felt.
  • ASTM D3161. A fan-driven wind test for shingles: Class A, D and F for 60, 90 and 110 mph.
  • ASTM D3462. The U.S. product standard for glass-felt asphalt shingles, referenced in the IBC and IRC as the minimum code requirement. It sets minimum Class A fire resistance and a 60 mph wind rating (NRCA).
  • ASTM D7158. An uplift-based wind test for self-sealing shingles: Class D, G and H for basic wind speeds of 115, 150 and 190 mph.
  • Attic ventilation. Intake vents (usually at the soffits) and exhaust vents (ridge, box or turbine vents) that move air through the attic to reduce heat and moisture.
  • Authorized inspector (Florida roof age). A person allowed to perform the roof inspection an insurer must accept on a roof 15 years or older before requiring replacement. Fla. Stat. 627.7011 lists licensed home inspectors, building code inspectors, certain licensed contractors, roofing contractors and others.
  • Barrel tile. A curved clay or concrete tile, common on Spanish and Mediterranean-style homes in Florida and Texas.
  • Basic wind speed (Vult and Vasd). The design wind speed for a site, taken from code wind maps. Vult is the ultimate design speed used by current codes; Vasd is the lower allowable-stress version. ASTM D7158 shingle classes are tied to Vult, and ASTM D3161 classes to Vasd (NRCA).
  • Batten. A wood or metal strip fastened over the deck that some tile and slate roofs hang or fasten to.
  • Betterment. An improvement beyond the pre-loss condition. In Florida, insurers may not make you pay for code-required betterment beyond the deductible unless the policy excludes or limits it (Fla. Stat. 626.9744).
  • Blistering. Bubbles in a roof membrane or coating, caused by trapped air or moisture.
  • Blow-off. Shingles, tiles, ridge caps or metal panels torn loose by wind. Missing pieces expose the underlayment or deck and are the most common sign of wind damage after a storm.
  • Boston ridge. A traditional way of capping a ridge or hip with overlapping cut shingles, now often replaced by factory-made hip and ridge shingles.
  • Bruise (hail). A soft spot where hail crushed a shingle's mat without breaking the surface. It may not be visible from the ground. In the UL 2218 impact test, a product fails if cracking or tearing appears on the back, not just from surface marks (IBHS).
  • Building official. The local government officer who enforces the building code, issues permits and approves inspections. In Miami-Dade and Broward, HVHZ field test results go to the building official.
  • Built-up roof (BUR). A low-slope roof made of layers of asphalt and reinforcing felts, often with a gravel or cap-sheet surface.
  • Bundle. A package of shingles. Most standard shingles come 3 bundles per square; heavier products need 4 or 5.
  • Butterfly roof. A roof with two planes that slope inward to a central valley, like an open book. It needs careful drainage design.
  • Button cap nail. A roofing nail with a wide plastic or metal cap that holds underlayment down. FORTIFIED requires annular-ring or deformed-shank nails with caps at least 1 inch across, not staples.

Roofing terms: C

  • Cant strip. A beveled strip, usually 45 degrees, installed where a flat roof meets a wall or parapet so the membrane doesn't have to bend at a sharp right angle.
  • Cap sheet. The top, mineral-surfaced layer of a modified bitumen or built-up roof.
  • Catastrophe area (Texas). The TDI-designated area of 14 coastal counties and part of Harris County east of Highway 146 where homeowners may not be able to buy private wind and hail coverage and can buy it from TWIA. See WPI-8 certification.
  • Certificate of Appropriateness (COA). A historic preservation office's approval for exterior work, including roofing, on a landmark or in a historic district. See historic district roofing.
  • Certificate of compliance (Texas windstorm). TDI's certificate that construction in the TWIA area meets the windstorm building code, needed for TWIA eligibility. TDI has issued all of them since June 1, 2020. A WPI-8 covers work inspected during construction; a WPI-8-E covers completed work.
  • Certified contractor (Florida). A contractor with a state certificate who may work anywhere in Florida. Certified roofing contractor licenses begin with CCC. Verify on DBPR's license search.
  • CILB. Florida's Construction Industry Licensing Board, which sets licensing rules for contractors, including the insurance amounts roofing contractors must carry, and disciplines licensees. DBPR provides its staff support.
  • Citizens Property Insurance. Florida's state-created insurer of last resort. It has specific roof age and condition rules. See Citizens roof requirements.
  • Claim of lien. The recorded document that creates a construction lien. In Florida, a lienor must record it within 90 days after last furnishing labor or materials (Fla. Stat. 713.08). In Texas, a residential original contractor must file a lien affidavit by the 15th day of the 3rd month after its work ended. See roofing liens.
  • Class 4. The highest impact rating under UL 2218, in which a 2-inch steel ball is dropped on the product. Many Texas insurers give discounts for Class 4 roofs; each sets its own rules (TDI).
  • Class A fire rating. The highest fire-resistance classification for roof coverings. ASTM D3462 shingles must be Class A.
  • Closed-cut valley. A valley where shingles from one side run through and shingles from the other side are cut along a line, hiding the valley metal.
  • Coating. A liquid-applied layer (acrylic, silicone and others) on a roof. Florida's 2026 code requires coatings over asphalt shingles to follow the shingle maker's approved instructions.
  • Collateral damage (hail). Dents and marks hail leaves on gutters, vents, AC fins, window screens and other soft metal. Adjusters and inspectors use it to judge the size and direction of hail at a property.
  • Common element. In a condominium, property owned in shares by all unit owners, often including the roof. See HOA and condo roofs.
  • Contingency agreement. A contract that makes a roofer's work depend on your insurance claim being approved, often signed at the door after a storm. See contingency agreements.
  • Coping. The cap on top of a parapet wall. Florida's code requires coping to be noncombustible and at least as wide as the parapet wall is thick.
  • Corrosion-resistant fasteners. Nails, screws and connectors coated or made to resist rust. The 2026 Florida Building Code adds Section 1711, which applies to roofing nails within 3,000 feet of a saltwater coastline and screws within 300 feet. FORTIFIED requires hot-dip galvanized or stainless fasteners within 3,000 feet of saltwater.
  • Cosmetic damage. Damage that affects appearance, such as small dents in metal, without reducing the roof's ability to keep water out. Some policies limit or exclude it; read your policy's definitions before filing a claim for dents.
  • Counterflashing. Metal set into or attached to a wall or chimney that overlaps the base or step flashing below it, shedding water off the joint.
  • Course. One horizontal row of shingles or tiles.
  • Cover board. A thin rigid board laid over insulation under a low-slope membrane to protect the insulation and give the membrane a firm surface.
  • Coverage A. The dwelling coverage limit on a homeowners policy. Florida hurricane deductibles and the Florida roof deductible are calculated from it, and many Texas wind and hail deductibles are a percentage of it.
  • Cricket. A small peaked structure built on the uphill side of a chimney or curb to divert water around it.
  • Curb. A raised frame around a skylight, hatch or rooftop unit that lifts it above the roof surface so it can be flashed.
  • Curling and cupping. Shingle edges turning up (curling) or the middle sinking (cupping), usually from age, heat or poor ventilation. Both are common signs a shingle roof is near the end of its life.

Roofing terms: D to E

  • DBPR. Florida's Department of Business and Professional Regulation, which licenses roofing contractors. Check licenses on its online lookup or call 850-487-1395. It also runs an unlicensed activity program. See Florida license lookup.
  • Deck attachment (improved). Re-nailing the deck with more or stronger fasteners. Required on Florida single-family reroofs (Fla. Stat. 553.844). IBHS found 8d ring-shank nails at tighter spacing can double uplift resistance.
  • Deck (roof deck, sheathing). The plywood, OSB or boards fastened to the rafters or trusses that the roof covering sits on.
  • Deck tape. Self-adhering tape, about 4 inches wide, applied over every seam in the roof sheathing. It is one way to create a sealed roof deck or secondary water barrier.
  • Deductible. The part of a covered loss you pay. Policies can have separate hurricane, wind and hail, or (in Florida) roof deductibles. Both Texas and Florida require you to pay it.
  • Deductible waiver. A contractor offering to absorb or rebate your deductible. Illegal in Texas (Bus. and Com. Code 27.02) and in Florida (Fla. Stat. 489.147).
  • Depreciation. The reduction in value for age and wear. Recoverable depreciation is the part a replacement cost policy pays after the work is done.
  • Design pressure. The wind uplift (in pounds per square foot) a roof component must resist at its location on the roof. Product approvals list the maximum design pressure.
  • DFS. Florida's Department of Financial Services. It runs the Insurance Consumer Helpline (1-877-693-5236), the property insurance mediation program and My Safe Florida Home, and receives the notice of intent to litigate.
  • Division I contractor (Florida). The Florida licensing group that includes general, building, residential and roofing contractors. The Homeowners' Construction Recovery Fund can pay up to $100,000 per claim on Division I contracts (Fla. Stat. 489.143).
  • Dormer. A structure with its own small roof that projects from a sloped roof, usually with a window.
  • Downspout. The vertical pipe that carries water from the gutter to the ground. Downspouts that dump onto a lower roof can wear out that roof early.
  • Drip edge. Bent metal at eaves and rakes that directs water away from the fascia. Florida's 2026 code requires it at eaves and gables of steep-slope roofs.
  • Dry-in. Sealing the exposed deck with underlayment or water barrier so the house is protected from rain before the final roof covering goes on.
  • DTPA. The Texas Deceptive Trade Practices Act, which lets consumers sue over false or misleading business practices. Claims generally must be brought within 2 years of the act or its discovery.
  • Eave. The lower, horizontal edge of a roof, usually overhanging the wall.
  • Edge metal. Metal trim at the perimeter of a roof, especially on low-slope roofs, that secures and finishes the edge.
  • Endorsement (policy). A form that adds to, removes or changes coverage in your insurance policy. Roof-related endorsements can change roof coverage from replacement cost to actual cash value or add a separate roof deductible. Read every endorsement listed on your declarations page.
  • EPDM. A synthetic rubber single-ply membrane used on low-slope roofs.
  • Existing Building Code (Florida). The volume of the Florida Building Code that governs repairs, alterations and reroofing on existing buildings. Its Section 706 holds the 25% rule and the recovering-versus-replacement rules.
  • Exposure category (wind). A rating of the terrain around a building (B, C or D) used in ASCE 7 wind calculations. Open coastal sites face higher loads.
  • Exposure (shingle). The part of each shingle left visible after the next course goes on. Standard 12-by-36-inch shingles have a 5-inch exposure.

Roofing terms: F to G

  • Fascia. The vertical board along the eave that the gutter usually attaches to.
  • Fastener back-out. Screws or nails working loose over time from heat cycling and wind. On exposed-fastener metal roofs, backed-out screws and worn washers are a common leak source.
  • Felt. Asphalt-saturated paper underlayment, sold by weight (for example, 15 or 30 pound).
  • Field. The main, open area of a roof plane away from edges, hips and ridges.
  • Fishmouth. A wrinkle or open gap at the edge of a lapped seam, felt or shingle that can let water in.
  • Flashing. Metal or membrane pieces that seal joints where the roof meets walls, chimneys, vents, skylights, valleys and edges.
  • Florida Building Code (FBC). Florida's statewide building code. The 8th Edition (2023) took effect December 31, 2023, and the Florida Building Commission has scheduled the 9th Edition (2026) to take effect December 31, 2026 (the City of Tampa's notice says January 1, 2027, and Miami-Dade applies its new product rules to permits applied for on or after January 1, 2027). The edition in effect on the date of the permit application governs the job. See Florida code and HVHZ.
  • Florida Building Commission. The state body that adopts and updates the Florida Building Code and runs the statewide product approval system.
  • Florida Product Approval. State approval of a building product for use under the Florida Building Code, searchable on floridabuilding.org by FL number.
  • FM 4473. An impact test standard for roof coverings. IBHS's FORTIFIED hail supplement requires tile to have FM 4473 Class 4.
  • FORTIFIED evaluator. A certified independent inspector who verifies that a FORTIFIED roof was built to the standard and submits the documentation to IBHS. A certificate is generally required for FORTIFIED insurance discounts.
  • FORTIFIED Roof. A voluntary IBHS standard for reroofing with a sealed deck, ring-shank nails in an enhanced pattern, wider drip edge and adhered starter strip. It can earn insurance discounts.
  • Four-point inspection. An insurance inspection of a home's roof, electrical, plumbing and heating and cooling systems, common for older Florida homes. See 4-point inspections.
  • FRSA. The Florida Roofing and Sheet Metal Contractors Association, a trade group that publishes technical guidance and, with the Tile Roofing Institute, the Florida tile installation manual.
  • FRSA/TRI tile manual. The Florida High Wind Concrete and Clay Roof Tile Installation Manual. The 2026 Florida code references its Seventh Edition for tile flashing and drip edge.
  • Gable. A roof with two slopes meeting at a ridge and a triangular wall at each end.
  • Gambrel roof. A two-sided roof with two slopes on each side, a steep lower slope and a shallower upper one, like a classic barn.
  • Governor-declared state of emergency (Florida). A declaration that triggers extra consumer protections: you can cancel a residential roofing contract signed within 180 days of the declaration, generally within 10 days; unlicensed contracting becomes a felony; and public adjuster fees are capped at 10% for claims from the emergency during the following year.
  • Granules. The mineral chips on asphalt shingles that protect the asphalt from sun. Granule loss can signal aging or hail.
  • Gravel stop. Raised metal edging at the perimeter of a built-up roof that keeps gravel surfacing from washing off and finishes the edge.
  • Gutter. A channel along the eave that collects runoff and sends it to downspouts.

Roofing terms: H to K

  • Hail. Ice stones that can bruise, crack or puncture roofing. Texas led the nation with 902 major hail events (1 inch or larger) in 2025 (Insurance Information Institute).
  • Headlap. The part of a shingle or felt course covered by both the course above and the one above that. It provides the double coverage that keeps water out.
  • Hip. The sloped ridge where two roof planes meet at an outside corner.
  • Hip and ridge shingles. Cap shingles that cover hips and ridges. In Florida's HVHZ, permits from January 1, 2027 require caps tested to UL 2375 at 110 mph.
  • Hip roof. A roof that slopes down on all four sides, with no gable walls. Florida's reroof roof-to-wall rules give priority to gable ends over hips, and hip roofs need more cutting, so estimators use a higher waste factor.
  • Holdback. The part of a replacement cost claim, usually recoverable depreciation, that an insurer pays after repairs. In Texas, it may be withheld until you show proof the deductible was paid (Ins. Code ch. 707).
  • Homeowner Claims Bill of Rights (Florida). A notice Florida insurers must give within 14 days after your first communication about a claim on a personal residential policy, summarizing your rights and the insurer's deadlines (Fla. Stat. 627.7142).
  • Homeowners' Construction Recovery Fund (Florida). A state fund that may pay homeowners who lose money because of certain violations by a licensed contractor, up to $100,000 per claim on Division I contracts. It does not cover unlicensed contractors. Contracts over $2,500 must include notice of it (Fla. Stat. 489.1425).
  • Hurricane deductible (Florida). A separate deductible for hurricane losses. Before issuing a policy, Florida insurers must offer $500, 2%, 5% and 10% of the dwelling limit, with exceptions by dwelling limit (Fla. Stat. 627.701). A 2% deductible on $400,000 of coverage is $8,000.
  • Hurricane protection (Florida HOA). Under Fla. Stat. 720.3035, every HOA must adopt hurricane protection specifications and may not deny an application that meets them. The term includes roof systems recognized by the Florida Building Code that meet ASCE 7-22.
  • Hurricane season. June through November in the Atlantic. A hurricane is a tropical cyclone with sustained winds of at least 74 mph, Category 1 on the Saffir-Simpson scale.
  • Hurricane straps or clips. Metal connectors that tie roof framing to walls. Florida requires roof-to-wall upgrades on some reroofs in the wind-borne debris region (Fla. Stat. 553.844).
  • HVHZ (High-Velocity Hurricane Zone). The stricter sections of the Florida Building Code that apply only in Miami-Dade and Broward counties. See Florida code and HVHZ.
  • IBHS. The Insurance Institute for Business and Home Safety, an insurer-funded research group that runs the FORTIFIED program and tests roofing for wind and hail.
  • Ice and water shield. A common name for self-adhered rubberized underlayment. In Texas and Florida it is used at valleys, eaves, penetrations and as a secondary water barrier.
  • Impact-resistant roofing. Roofing tested to resist hail, usually rated under UL 2218 or FM 4473.
  • Impact-Resistant Roofing Installation Form (PC068). A TDI form the contractor completes certifying a roof's UL 2218 class. TWIA requires it for the impact-resistant discount.
  • In-progress inspection. A building department inspection or affidavit, mid-job, of deck nailing and the water barrier before they are covered.
  • IRC and IBC. The International Residential Code and International Building Code, model codes published by the International Code Council. Texas adopts the 2012 editions as the minimum municipal residential and commercial codes, and cities may adopt newer editions or local amendments.
  • Kickout flashing. A small angled flashing at the bottom of a roof-to-wall joint that turns water into the gutter instead of behind the siding or stucco.
  • Know Your Rights disclosure (Texas). The statutory "Know Your Rights and Responsibilities Under the Law" statement a Texas residential contractor must give the owner before the construction contract is signed (Tex. Prop. Code ch. 53).

Roofing terms: L to M

  • Laminated shingle. Another name for an architectural or dimensional shingle, made of two or more bonded layers.
  • Law and ordinance coverage. Insurance that pays extra costs to meet current building codes when repairing covered damage. TDI lists it as a common add-on.
  • Lien. A legal claim against property for unpaid work or materials. See roofing liens.
  • Lien affidavit (Texas). The sworn document a Texas contractor or supplier files with the county clerk to claim a mechanic's lien. On a homestead, a lien also requires a written contract signed before work begins by both spouses if married and filed with the county clerk.
  • Lien release (waiver). A signed document from a contractor, subcontractor or supplier giving up lien rights for amounts paid.
  • Lightweight insulating concrete (LWIC). A light concrete poured over a low-slope roof deck to add insulation and slope. The 2026 Florida code adds an exception that can let an adequate existing LWIC layer stay in place when reroofing.
  • Limited common element. A condo common element reserved for one or a few units. The declaration may make those owners pay for its upkeep.
  • Low-slope roof. A roof with a slope under 2:12 in Florida's code terms, usually covered with a membrane rather than shingles or tile.
  • Mansard roof. A four-sided roof with a steep, nearly vertical lower slope on each side and a flatter top, often used to create an extra floor.
  • Matching. Florida's rule (Fla. Stat. 626.9744) that when replaced items don't reasonably match in quality, color or size, the insurer must make reasonable repairs or replacement in adjoining areas, unless the policy says otherwise. See matching law.
  • Mechanically attached. Fastened with nails or screws rather than adhesive or mortar.
  • Mechanic's lien (Texas). A claim against property by an unpaid contractor, subcontractor or supplier under Texas Property Code chapter 53, rewritten effective January 1, 2022. Owners protect themselves by keeping the 10% retainage for 30 days after completion.
  • Mediation (Florida DFS program). A state-run, nonadversarial settlement conference for disputed residential property claims, available before appraisal or a lawsuit. The insurer pays the cost of the conference (Fla. Stat. 627.7015). Ask DFS how to request it.
  • Membrane. A continuous waterproof sheet, such as TPO, PVC, EPDM or modified bitumen, used on low-slope roofs.
  • Metal roof. Steel, aluminum, copper or zinc roofing. Standing-seam panels hide fasteners in raised seams; exposed-fastener panels screw through the panel face. See metal roofs.
  • Milestone inspection. A Florida structural inspection of condo and co-op buildings three habitable stories or higher, by the end of the year the building turns 30 and every 10 years after (Fla. Stat. 553.899).
  • Mitigation discount (Florida). A premium credit for features that reduce wind damage, such as roof shape, deck attachment, roof-to-wall connections and secondary water resistance. Florida insurers must offer actuarially reasonable discounts (Fla. Stat. 627.0629) and accept the uniform mitigation form.
  • Modified bitumen. An asphalt-based roll roofing for low-slope roofs, reinforced and modified with polymers, applied by torch, heat, cold adhesive or self-adhesion.
  • Mortar-set tile. Tile attached with mortar. In the HVHZ, mortar- and adhesive-set tile can require a TAS 106 field bond test.
  • My Safe Florida Home. A state program offering free wind mitigation inspections and matching grants for upgrades when funded. See My Safe Florida Home.

Roofing terms: N to O

  • Nail pop. A nail that has backed out and lifts the shingle above it, letting water follow the nail into the deck.
  • NOA (Notice of Acceptance). Miami-Dade County's product approval, listing approved uses and design pressures, with an expiration date. A copy must be at the job site.
  • Notice of claim (Texas). The notice a Texas subcontractor or supplier sends the owner and contractor about unpaid work. On residential projects, it is due by the 15th day of the 2nd month after the labor or materials were provided.
  • Notice of Commencement (NOC). A Florida form recorded with the county clerk and posted on site before the first inspection, required on most jobs over $2,500 (Fla. Stat. 713.13).
  • Notice of intent to litigate (Florida). A notice a policyholder must file with DFS at least 10 business days before suing an insurer under a property policy, and not before the insurer's coverage decision (Fla. Stat. 627.70152).
  • Notice to Owner. A notice a Florida subcontractor or supplier not hired directly by you must send to preserve lien rights, within 45 days of first furnishing (Fla. Stat. 713.06).
  • NRCA. The National Roofing Contractors Association, a national trade group that publishes technical manuals and research on roofing standards.
  • OIR. Florida's Office of Insurance Regulation, which approves insurance rates and forms and adopted the current mitigation inspection form, OIR-B1-1802 (Rev. 04/26).
  • OIR-B1-1802. Florida's Uniform Mitigation Verification Inspection Form, the wind mitigation form. A revised version (Rev. 04/26) took effect April 1, 2026.
  • O&P (overhead and profit). A general contractor's markup for running the business and coordinating trades. Insurance estimates may or may not include it, depending on the job's complexity and the insurer.
  • Open valley. A valley where the metal is left exposed and shingles are trimmed back on both sides.
  • Opening protection. Impact-rated windows, doors, garage doors, skylights and shutters. It is a separate item on Florida's mitigation form and is eligible for My Safe Florida Home grants.
  • OPIC. The Texas Office of Public Insurance Counsel, a state agency that represents consumers on insurance issues. Phone 1-877-611-6742.
  • Overhang. The part of the roof that extends past the walls at eaves and rakes.
  • Overlay (re-cover). Installing a new roof covering over an existing one without tearing off. Florida's code prohibits it in many cases, such as when two coverings already exist.
  • Owner-builder. A homeowner who pulls their own permit and supervises the work. Florida's exemption has strict conditions, including a presumption against sale or lease within 1 year (Fla. Stat. 489.103).

Roofing terms: P to R

  • Parapet. A low wall extending above a flat roof's edge.
  • Peel-and-stick. Self-adhered underlayment or membrane with a sticky back.
  • Percentage deductible. A deductible set as a percentage of your dwelling coverage rather than a flat dollar amount. If dwelling coverage is $300,000 and the wind and hail deductible is 2%, you pay the first $6,000 of a covered storm loss.
  • Permit. Local government approval to do the work, followed by inspections. Required statewide in Florida; set city by city in Texas. See roof permits.
  • Pipe boot. A flashing collar, often rubber and metal, that seals around plumbing vent pipes. A frequent leak source as the rubber ages.
  • Pitch multiplier. The factor that converts footprint area to sloped roof area: the square root of 1 plus (rise/12) squared. A 6/12 roof is 1.118.
  • Pitch (slope). How steep a roof is, written as inches of rise per 12 inches of run. A 6/12 pitch rises 6 inches every foot, about 26.6 degrees.
  • Plan of operation (TWIA). TWIA's rules for eligibility. Structures built, altered or repaired on or after January 1, 1988 must meet its building code and inspection requirements to qualify for coverage.
  • Polyiso. Polyisocyanurate, a rigid foam board insulation widely used under low-slope membranes.
  • Ponding. Water that stays on a flat roof long after rain, which speeds wear and can signal drainage or structural problems.
  • Price gouging. Charging grossly excessive prices for necessities after a declared disaster. In Texas, the Attorney General asks people to watch for and report price gouging after emergencies.
  • Prompt Payment of Claims Act (Texas). Tex. Ins. Code chapter 542. Insurers must accept or reject a claim within 15 business days after getting all requested items (up to 45 more days with notice) and pay within 5 business days after accepting. Deadlines extend 15 days after a declared catastrophe.
  • Proof of loss. A policyholder's documentation of a claim, sometimes a sworn form. Florida insurers must begin investigating within 7 days after proof of loss and finish any physical inspection within 30 days.
  • Public adjuster. A licensed adjuster you hire to handle your claim. Florida caps fees at 10% of payments on claims from a declared emergency in the year after it and 20% otherwise; Texas caps commissions at 10%.
  • PVC membrane. A single-ply low-slope membrane made of polyvinyl chloride with heat-welded seams.
  • Qualified inspector (Texas windstorm). An inspector appointed by TDI to inspect construction in the TWIA area. Owners can hire a Texas-licensed professional engineer or an appointed qualified inspector, or request a TDI inspector. TDI does not regulate their fees.
  • Rafter. A sloped framing member that supports the roof deck.
  • Rake. The sloped edge of a roof at a gable end.
  • RAS. Roofing Application Standards: detailed installation rules in Florida's HVHZ test protocols, such as RAS 115 for shingles and RAS 118 to 120 for tile.
  • RCAT. The Roofing Contractors Association of Texas, which runs a voluntary roofer license; Texas has no state roofing license.
  • Recover (roof recover). Florida's code term for installing a new roof covering over a prepared existing one without removing it. Tear-off is required when the existing roof is wet or deteriorated, is shake, slate or tile, already has two or more layers, or has unrepaired blisters.
  • Recoverable depreciation. The depreciation a replacement cost policy pays back after you complete repairs.
  • Registered contractor (Florida). A contractor licensed through local competency who may work only in those jurisdictions. Registered roofing licenses begin with RC.
  • Remaining useful life. An inspector's estimate of how many years a roof has left. Florida insurers can't refuse a roof 15 or more years old solely for age if an inspection shows at least 5 years left, and Citizens requires at least 5 years on over-age roofs.
  • Replacement cost value (RCV). What it costs to repair or replace at current prices, without subtracting depreciation.
  • Re-roof. Recovering or replacing an existing roof covering, as the Florida code defines it.
  • Retainage (Texas). The 10% of the contract price a Texas owner must hold back during the work and for 30 days after completion, to protect against subcontractor and supplier liens (Tex. Prop. Code 53.101).
  • Ridge. The horizontal line at the top where two roof planes meet.
  • Ridge vent. A continuous vent along the ridge, covered with cap shingles, that exhausts attic air.
  • Ring-shank nail. A nail with rings along its shank that grip the wood. FORTIFIED requires 8d ring-shank nails at least 0.113 inch in diameter and 2-3/8 inches long at 6 inches on center. IBHS found ring-shank nails with tighter spacing can double a deck's uplift resistance.
  • Roof age (Florida). Measured from the last date 100% of the roof was built or replaced to the code then in effect (Fla. Stat. 627.7011).
  • Roof covering. The outer weather layer, such as shingles, tile, metal or a membrane, as opposed to the full roof system with deck, underlayment and flashing.
  • Roof deductible (Florida). A separate deductible for roof claims allowed by Fla. Stat. 627.701, capped at the lesser of 2% of dwelling coverage or 50% of the roof's replacement cost, and not applied to hurricane losses.
  • Roof replacement (Florida code). The code term for removing the existing roof covering, repairing any damaged substrate and installing a new covering. Reroofing includes both replacement and recover.
  • Roof section. Under Florida's code, part of a roof divided by expansion joints, parapets, flashing (not valleys), elevation changes (not hips or ridges), roof type or legal description. Used in the 25% rule.
  • Roof-to-wall connection. How roof framing is tied to the walls: toe nails, clips, single wraps or double wraps. A key item on Florida wind mitigation forms.

Roofing terms: S

  • Saddle. Another name for a cricket: a small peaked structure behind a chimney or curb that splits water around it.
  • Scupper. An opening in a parapet that drains water off a flat roof.
  • Sealed roof deck. A FORTIFIED term for a deck protected by tape over all seams with underlayment, a two-layer felt system, or a full self-adhered membrane, so water stays out even if the covering blows off.
  • Secondary water resistance (SWR). A sealed layer under the roof covering, such as self-adhered tape over deck seams or a full self-adhered underlayment, that keeps water out if the covering blows off. Required on Florida single-family reroofs.
  • Self-adhered underlayment. Rubberized asphalt or synthetic underlayment with an adhesive back that seals around nails.
  • Self-sealing strip. The factory adhesive strip on asphalt shingles that bonds each course to the one below after installation. ASTM D7158 wind ratings apply to self-sealing shingles.
  • Shed roof. A single sloped plane, common on porches, additions and modern homes.
  • Shingle. An individual overlapping roof unit, usually asphalt, wood or slate.
  • SIRS (structural integrity reserve study). A Florida study, required at least every 10 years for condo buildings three habitable stories or higher, of the roof and other key components, with a reserve funding plan (Fla. Stat. 718.112).
  • Slate. Natural stone roofing; NRCA-attributed estimates put its life at 50 to 100 years depending on grade. Heavy and costly. See specialty roofs.
  • Soffit. The underside of a roof overhang, often vented for attic intake air.
  • Solar reflectance. How much sunlight a roof surface reflects. Higher values keep roofs cooler. See cool roofs.
  • Solicitation (door-to-door). A sale made away from the seller's business. In Texas, buyers can generally cancel qualifying home-solicitation sales over $25 until midnight of the 3rd business day after signing. Florida restricts roofing ads and solicitations that urge storm claims (Fla. Stat. 489.147).
  • Spray polyurethane foam (SPF). Foam sprayed onto a low-slope roof that hardens into an insulating, seamless layer and is protected with a coating. Florida's code allows a new protective coating over existing SPF without tear-off.
  • Square. 100 square feet of roof surface, the unit roofers price and order by.
  • Standing seam. Metal roofing with raised, interlocking seams and concealed fasteners.
  • Starter strip. The first row of material at the eaves (and often rakes), placed under the first course so the edge is sealed and the gaps between shingles are covered.
  • Step flashing. Small L-shaped metal pieces woven in with each shingle course where a roof meets a sidewall.
  • Storm chaser. A contractor who travels to storm-hit areas and solicits door to door. See storm chaser scams.
  • Substrate. The surface a roofing layer is applied to, such as the deck or insulation.
  • Supplement. A request to add items or money to an insurance estimate, often after hidden damage is found. Florida requires supplemental claims within 18 months of the date of loss (Fla. Stat. 627.70132).
  • Supplemental claim (Florida). A claim for additional payment on a loss already reported. In Florida it must be noticed within 18 months after the date of loss (Fla. Stat. 627.70132).
  • Surplus lines insurer. An insurer not licensed as a standard carrier in the state that may cover hard-to-place risks. In Texas, surplus lines claim deadlines are longer: 30 business days to acknowledge and 20 business days to pay after accepting.
  • Synthetic underlayment. A woven or spun plastic underlayment, lighter and more tear-resistant than felt.

Roofing terms: T to U

  • TAS. Testing Application Standards in Florida's HVHZ test protocols, such as TAS 106 (tile bond field test) and TAS 124 (field uplift testing).
  • TDI. The Texas Department of Insurance, which regulates insurers and runs the windstorm inspection program. Help Line: 800-252-3439.
  • TDLR. The Texas Department of Licensing and Regulation. It does not license roofing contractors; Texas has no state roofing license. See vetting a Texas roofer.
  • Tear-off. Removing the old roof covering down to the deck.
  • Texas FAIR Plan. The Texas FAIR Plan Association, a state-created insurer of last resort for homes in areas where private coverage is hard to get. It dropped its 1% wind and hail deductible option effective July 1, 2026. Phone 800-979-6440.
  • Three-tab shingle. A flat, single-layer asphalt shingle with three tabs per strip, lighter and flatter-looking than architectural shingles. Check each product's wind class.
  • Tile (clay, concrete). Heavy, long-lived roofing common in Florida. The underlayment beneath does most of the waterproofing. See tile roofs.
  • TPO. Thermoplastic polyolefin, a white or light single-ply membrane with heat-welded seams for low-slope roofs. See flat roofs.
  • Truss. A prefabricated triangular framing unit that supports the roof, used instead of rafters in most newer homes.
  • Tune-up. A sales term for a maintenance visit that bundles small fixes such as resealing, boot replacement and loose shingles. Not a code term.
  • TWIA. The Texas Windstorm Insurance Association, which sells wind and hail coverage in 14 coastal counties and part of Harris County. See TWIA and WPI-8.
  • UL 2218. An impact test for roof coverings using steel balls of 1.25 to 2 inches; Class 1 to Class 4.
  • UL 2375. A wind test standard used, modified to 110 mph, for hip and ridge shingles in Florida's HVHZ.
  • Umpire (appraisal). The neutral third person chosen by the two appraisers in an insurance appraisal. The umpire's decision on the amount of loss is binding on both sides (TDI).
  • Underlayment. The layer between the deck and the roof covering: felt, synthetic or self-adhered.
  • Unlicensed contracting (Florida). Doing roofing work for others without a Florida license. It is a first-degree misdemeanor, and a felony for a repeat offense or during a declared emergency (Fla. Stat. 489.127). The unlicensed contractor can't enforce the contract (Fla. Stat. 489.128).
  • Uplift. Wind's upward pull on a roof, strongest at corners, edges and ridges.
  • 25% rule. Florida's code limit on repairing more than 25% of a roof or section in 12 months without bringing it all to code; roofs built under the 2007 code or later are exempt from the full-replacement result (Fla. Stat. 553.844(5)).

Roofing terms: V to Z

  • Valley. The inside angle where two roof planes meet, which carries a lot of water. Valleys can be open, closed-cut or woven.
  • Vapor retarder. A layer that slows moisture moving through a roof assembly, often used under insulation on low-slope roofs over humid spaces.
  • Vent (box, turbine, ridge, soffit). Openings that let air into or out of the attic. The IBHS FORTIFIED Roof standard calls for attic vents resistant to wind and rain.
  • Warranty, manufacturer. The product maker's promise about the material, sometimes enhanced when installed by certified contractors. See roof warranties.
  • Warranty, workmanship. The contractor's promise about installation quality, only as good as the company behind it.
  • Wear and tear. Gradual deterioration from age and weather. Insurers don't pay for it; TDI says an insurer won't pay for a new roof just because the old one is old or worn out.
  • Wind and hail deductible (Texas). A separate deductible for wind and hail damage, often a percentage of dwelling coverage. TDI advises asking whether it differs from your all-other-perils deductible, because it can raise out-of-pocket costs after a storm.
  • Wind mitigation inspection. A Florida inspection documenting wind-resistant features on form OIR-B1-1802, used for insurance discounts. See wind mitigation.
  • Wind-borne debris region. Areas where the code requires protection against flying debris, defined by wind speed and distance from the coast. It also triggers some Florida reroof roof-to-wall rules.
  • Windstorm exclusion (Florida). An option to remove wind coverage from a Florida policy. Insurers must provide windstorm coverage but must offer the exclusion, which requires a handwritten statement signed by all named insureds (Fla. Stat. 627.712).
  • Workers' compensation affidavit (Florida). Proof of workers' compensation, liability and property damage insurance that a Florida contractor must file before getting or renewing a license (Fla. Stat. 489.115). Ask for current certificates before work starts.
  • Woven valley. A valley where shingles from both sides overlap through the valley in alternating courses.
  • WPI-8. TDI's certificate of compliance for windstorm construction inspected during the work, needed for TWIA coverage in the designated area.
  • WPI-8-E. TDI's certificate for completed construction, requiring a Texas-licensed engineer's post-construction inspection; may cost more than a regular WPI-8.
  • Xactimate. Estimating software from Verisk widely used by insurance adjusters and contractors to price repairs line by line. See how to read an estimate.
  • 542A notice (Texas). The written presuit notice required at least 61 days before suing over a weather-related property claim under Texas Insurance Code chapter 542A. See 542A.
  • 15-year roof rule (Florida). Florida insurers may not refuse to write or renew solely because a roof is under 15 years old, and must allow an inspection for older roofs (Fla. Stat. 627.7011). See the 15-year rule.

Related roofing guides

Roofing by state and city

Questions people ask

What is a roofing square?

A square is 100 square feet of roof surface, the unit roofers use to measure, price and order materials. A 2,500-square-foot roof is 25 squares. Roof area is larger than a home's footprint because of slope and overhangs, so you can't divide living area by 100. Use the footprint times the pitch multiplier to estimate it.

What does pitch 6/12 mean?

It means the roof rises 6 inches for every 12 inches of horizontal run, an angle of about 26.6 degrees. Its pitch multiplier is 1.118, so the roof surface is about 11.8% larger than the area beneath it. Florida's code calls slopes of 2:12 and above steep-slope and anything flatter low-slope.

What is a valley on a roof?

A valley is the inside angle where two sloping roof planes meet, forming a channel that carries a lot of water. Valleys are finished as open (metal showing), closed-cut or woven. Because water concentrates there, valleys are a common leak spot and usually get self-adhered underlayment beneath the covering.

What is a starter strip?

The starter strip is the first row of roofing material placed along the eaves, and often the rakes, beneath the first course of shingles. It seals the roof edge and covers the gaps between the first-course shingles. IBHS's FORTIFIED Roof standard calls for a fully adhered starter strip with a wider drip edge for wind resistance.

What does dry-in mean?

Dry-in means the roof deck is covered and sealed against water, typically with underlayment and, in Florida, the required secondary water barrier, before the final shingles, tile or metal go on. A careful crew dries in every section it tears off the same day, so a sudden storm doesn't soak the house.

What is O&P in a roofing estimate?

O&P stands for overhead and profit, the markup a general contractor charges to run the business and coordinate subcontractors. It appears as a line on many insurance estimates. Whether an insurer includes it depends on the job's complexity and the insurer's practices, so ask the adjuster to explain it if it's missing or disputed.

What is RCV vs. ACV?

RCV, replacement cost value, is what it costs to repair or replace at today's prices. ACV, actual cash value, is RCV minus depreciation for age and wear. TDI's example: a roof with a $10,000 replacement cost might have an ACV of $7,000. Replacement cost policies often pay ACV first and the rest after repairs.

What is a hip roof vs. a gable roof?

A gable roof has two slopes meeting at a ridge, with triangular walls at the ends. A hip roof slopes down on all four sides with no gable walls. Florida's roof-to-wall retrofit rules give priority to gable ends. Hip roofs usually need more cutting and a higher waste factor.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration